Professional Documents
Culture Documents
htm
Site Parameters
Parameter Comments
Description: If this parameter is set to N, you
can add new ALM users from Site
Administration (Site Users tab) only. If this
parameter is set to Y (default), new ALM users
can also be added from Project Customization.
In the Project Users page, click Add User. The
Add User to Project dialog box opens. If this
ADD_NEW_USERS_FROM_PROJECT parameter is set to Y, a New button is available
for adding new ALM users.
Default value: Y
Introduced in release: ALM 11.50
Introduced in patch: GA
System: true
Description: The maximum number of
synchronization jobs that can run at the same
time. The default value is 5.
Default value: 5
ALI_MAX_PROJECT_SYNC_JOB Min value: 1
Max value: 100
Introduced in release: ALM 11.50
Introduced in patch: SP2
System: true
Description: The minimum time interval
between synchronizations for a project. The
actual run time depends on the number of
synchronized projects and synchronization jobs.
The default value is 60 minutes.
Default value: 60
ALI_MIN_PROJECT_SYNC_PERIOD
Min value: 5
Max value: 9223372036854775807
Introduced in release: ALM 11.50
Introduced in patch: SP2
System: true
Description: The interval between checks to
determine if any project requires
synchronization. The default value is 10
minutes.
Default value: 10
ALI_PROJECT_SYNC_DISCOVERY_INTERVAL Min value: 5
Max value: 9223372036854775807
Introduced in release: ALM 11.50
Introduced in patch: SP2
System: true
ALLOW_HTTP_METHOD_OVERRIDE Description: Controls whether to allow REST
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 1/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Default value: N
Introduced in release: QC 10.00
Introduced in patch: GA
System: false
Description: The base repository path. The
ALM and Site Administration repositories are
sub-folders of this repository. If you change this
parameter value, new projects you create are
stored in this location. After you change the
value of this parameter, you must restart all
servers in the cluster. The initial repository path
BASE_REPOSITORY_PATH is set during ALM server configuration. For more
information, refer to the Micro Focus Application
Lifecycle Management Installation and Upgrade
Guide.
Introduced in release: QC 10.00
Introduced in patch: GA
System: true
Description:
siteparams.BPT_USE_ORIGINAL_VALUE_TYP
E.description
BPT_USE_ORIGINAL_VALUE_TYPE Default value: N
Introduced in release: ALM 11.00
Introduced in patch: GA
System: false
Description: Valuing this parameter with ‘Y?
bypasses checking that required fields are
valued before performing an update of multiple
entities.
BULK_ACTION_IGNORE_REQUIRED_FIELD Default value: N
Introduced in release: ALM 12.50
Introduced in patch: 1
System: true
Description: This parameter defines the max
rows of a BV excel report.
Default value: 100000
Min value: 1
BV_EXCEL_REPORT_MAX_ROWS Max value: 9223372036854775807
Introduced in release: ALM 11.51
Introduced in patch: GA
System: false
Description: Site param for a list of BV field
names for hide on UI. The list is separated with
semicolon.
BV_FIELDS_HIDE_FIELDS Introduced in release: ALM 12.60
Introduced in patch: GA
System: false
CLEAN_ORPHAN_ANALYSIS_DATA_JOB_SLE Description: This parameter is related to the
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 5/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 7/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Introduced in patch: 5
System: false
Description: This parameter specifies the
limitation of number of items per dash board
page. This parameter is used when other limit
than the default is needed.
Default value: 4
DASHBOARD_PAGE_ITEM_LIMIT Min value: 1
Max value: 9223372036854775807
Introduced in release: QC 10.00
Introduced in patch: GA
System: false
Description: Server side data hiding mode. (ON
- data hiding is enabled, LEGACY - data hiding
is enabled but certain clients may skip data
hiding)
Default value: ON
DATA_HIDING_MODE Allowed values: LEGACYON
Introduced in release: ALM 12.20
Introduced in patch: GA
Case sensitive: false
System: false
Description: This parameter will determine time
period of image attachment files' storage on
Client machine. This parameter is used together
with parameter
TOTAL_SIZE_ALLOWED_IMAGE_FILES.
Default value: 30
DAYS_TO_KEEP_IMAGE_FILES
Min value: 0
Max value: 1000
Introduced in release: ALM 12.50
Introduced in patch: GA
System: false
Description: per each project, or for the whole
domain set if the special closure log is enabled.
DEBUG_CLOSURE_LOG_DOM_PROJ Introduced in release: ALM 11.00
Introduced in patch: GA
System: false
DENY_EXTERNAL_IMAGES Description: If this parameter is set to "Y",
images from external resources (images that
are not attachments in the project but are
references to resources outside ALM) will be
sanitized and will not be presented by clients.
WARNING: If value is set to “Y?and text field
containing images from external resources ?
those references will be saved as a sanitized
text in the database and not as URLs. Default
value is "N".
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 8/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Default value: N
Introduced in release: ALM 12.20
Introduced in patch: GA
System: false
Description: This flag affects customization
loading by OTA Valid values: N - load
customization asynchronously, Y - load
customization synchronously.
DISABLE_ASYNC_CUSTOMIZATION_LOAD Default value: N
Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: If this parameter is set to Y
(default), only users belonging to the TDAdmin
group can use the OTA Command object. If it is
set to N, any user can use it. If it is set to ALL,
no users can use it. For more information, refer
to the Micro Focus ALM Open Test Architecture
API Reference.
DISABLE_COMMAND_INTERFACE Default value: Y
Allowed values: YNAllReadOnly
Introduced in release: TD 8.21
Introduced in patch: GA
Case sensitive: false
System: false
Description: Enables/disables access to the QC
debug console. The console, when enabled, is
accessible using
http://<qcserver>/qcbin/tdservlet?
method=debuginfo URI or
DISABLE_CONSOLE_DEBUG_INFO http://<qcserver>/qcbin/debug.
Default value: Y
Introduced in release: QC 9.20
Introduced in patch: 1
System: false
Description: If this parameter is set to Y, default
values for certain entities (such as defects,
tests, and test configurations) cannot be set per
user per project.
DISABLE_DEFAULT_VALUES Default value: N
Introduced in release: ALM 11.00
Introduced in patch: GA
System: false
DISABLE_EXTENDED_STORAGE Description: This parameter controls user
access to the OTA ExtendedStorage object.
This is a security feature that can be used to
limit access to the file system of the project. If
this parameter is set to Y (default), the
ExtendedStorage object cannot be accessed
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 9/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 10/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 11/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Default value: N
Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: Y/N value for enable or disable the
REST Output Sanitization. Default value is Y.
Default value: Y
ENABLE_OUTPUT_SANITIZATION Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: Specifies the segments by which to
group the collected QC sense information in the
time frame that was defined by
PRODUCT_ASSESSMENT_QC_SENSE_DAY
S_BACK and
ENABLE_PERFORMANCE_MONITOR_BIRT_R PRODUCT_ASSESSMENT_QC_SENSE_END
EPORTS _DATE as part of Assessment collection flow.
Default value: N
Introduced in release: ALM 11.52
Introduced in patch: GA
System: false
Description: If this parameter is set to Y, user
can use quick field search feature. Default value
is N, which disables the quick field search
feature.
ENABLE_QUICK_FIELD_SEARCH Default value: Y
Introduced in release: 12.5
Introduced in patch: GA
System: false
Description: This parameter enables/disables
validation for read-only entity fields via REST.
The default value of the parameter is 'Y' and it
means that validation is on and all entity fields
which have SF_IS_EDIT=Y are not editable via
ENABLE_REST_EDIT_FIELDS_VALIDATION REST.
Default value: N
Introduced in release: ALM 12.20
Introduced in patch: GA
System: false
Description: This site param enables / disables
the XSRF token validation sent from client on
request. Possible values: Y / N. When this site
param is set to ''N'', the entire site is exposed to
security risk. Default value: Y.
ENABLE_XSRF_VALIDATION
Default value: Y
Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 13/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 14/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Default value: Y
Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: Specifies whether the server will
perform a client certificate status check using
the "Online Certificate Status Protocol" (OCSP).
The EXTERNAL_AUTH_CERTIFICATES_FILE
has to be defined as a file with allowed client
EXTERNAL_AUTH_CERTIFICATE_OCSP_CHE certificates issuers; otherwise, all certificates will
CK be rejected.
Default value: N
Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: Specifies whether the client
certificate must contain "Authority Info Access
extensions" to perform an online certificate
status check (OCSP). This extension is required
only if OCSP check is enabled. See the
EXTERNAL_AUTH_CERTIFICATE_OCSP_REQ EXTERNAL_AUTH_CERTIFICATE_OCSP_CH
UIRED ECK documentation for details.
Default value: Y
Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: External Authentication: Y/N
whether to enable the certificate policy
verification
EXTERNAL_AUTH_CERTIFICATE_POLICY_CH Default value: Y
ECK Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: External Authentication: stores the
certificate's valid policy
EXTERNAL_AUTH_CERTIFICATE_VALID_POL Introduced in release: ALM 12.00
ICY
Introduced in patch: GA
System: false
Description: External Authentication: header
that holds the certificate
Default value: CERT
EXTERNAL_AUTH_CERT_HEADER_NAME Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
EXTERNAL_AUTH_EXECUTION_MODE_HEA Description: External Authentication: header
DER_NAME that holds the execution mode of client. Values
are enum ExecutionMode:
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 16/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
NOT_SPECIFIED(default), INTERACTIVE,
NON_INTERACTIVE
Default value: EXECUTION_MODE
Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: External Authentication: stores the
extended hardware keys
EXTERNAL_AUTH_EXTENDED_HARDWARE_ Introduced in release: ALM 12.00
KEYS
Introduced in patch: GA
System: false
Description: External Authentication: Y/N
whether hardware card verification is required
EXTERNAL_AUTH_HARDWARE_CARD_IS_RE Default value: Y
QUIRED Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: External Authentication: header
that holds the subject of certificate
Default value: SM_USER
EXTERNAL_AUTH_HEADER_NAME Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: External Authentication: Y/N
whether a policy is required
Default value: N
EXTERNAL_AUTH_IS_POLICY_REQUIRED Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: External Authentication: Y/N
whether to enable the match delta CRL by
issuer verification
EXTERNAL_AUTH_MATCH_DELTACRL_BY_I Default value: Y
SSUER Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: External Authentication: Which
external authentication to use. Possible values
are: N - do not use external authentication, Y -
use external authentication
EXTERNAL_AUTH_MODE Default value: N
Introduced in release: ALM 12.00
Introduced in patch: GA
System: true
EXTERNAL_AUTH_USER_FIELD_PATTERN Description: External Authentication: regex to
find the username, email
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 17/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 18/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 20/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Introduced in patch: 5
System: false
Description: Controls Input Validation
framework mode and has 3 possible values:
OFF - no validation LOG - perform hidden
validation (never throw exceptions but log all the
found errors) ON - full validation (default value)
Default value: ON
INPUT_VALIDATION_MODE
Allowed values: ONOFFLOG
Introduced in release: ALM 12.00
Introduced in patch: GA
Case sensitive: false
System: false
Description: The interval between invalid logins.
It's used by the user lockout service.
Default value: 60000
INTERVAL_BETWEEN_INVALID_LOGINS_TO_ Min value: 1
LOCKOUT Max value: 9223372036854775807
Introduced in release: ALM 12.00
Introduced in patch: 01
System: true
Description: The Number of minutes before
automatically releasing a locked user.
Min value: 1
INTERVAL_TO_AUTO_RELEASE_LOCKOUT Max value: 9223372036854775807
Introduced in release: ALM 12.50
Introduced in patch: 01
System: true
Description: Enables you to define the
maximum number of connections to the
database allowed for LAB_PROJECT. By
default, the value is set to 100.
Default value: 100
LAB_MAX_DB_HANDLERS Min value: 1
Max value: 9223372036854775807
Introduced in release: ALM 11.52
Introduced in patch: GA
System: false
LDAP_IMPORT_ATTRIBUTE_MASK Description: This parameter enables you to
define a regular expression that can be used to
distinguish between different values for an
LDAP attribute when importing users from an
LDAP directory. When importing users, ALM
chooses a value for the attribute that matches
the regular expression. The parameter should
be of the format: <LDAP attribute name> =
<regular expression>, where <LDAP attribute
name> is the name of the LDAP attribute whose
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 22/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 24/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
System: false
Description: The SMTP server port used by
ALM to send mail. By default, the value is set to
25.
Default value: 25
MAIL_SERVER_PORT Min value: 1
Max value: 65535
Introduced in release: TD 8.21
Introduced in patch: 13
System: false
Description: Indicates whether the site name is
displayed in the subject of the mail. This
parameter can be either a project parameter or
a site parameter. If the parameter is defined in
both site and project tables, the project value is
MAIL_SHOW_SITE_NAME considered. The default value is N.
Default value: N
Introduced in release: ALM 11.00
Introduced in patch: 2
System: false
Description: The SMTP server socket
connection timeout. By default, the value is set
to 5 minutes.
Default value: 300000
MAIL_SOCKET_CON_TIMEOUT Min value: -9223372036854775808
Max value: 9223372036854775807
Introduced in release: ALM 12.01
Introduced in patch: 2
System: false
Description: The SMTP server socket read
timeout. By default, the value is set to 1 minute.
Default value: 60000
Min value: -9223372036854775808
MAIL_SOCKET_READ_TIMEOUT Max value: 9223372036854775807
Introduced in release: ALM 12.01
Introduced in patch: 2
System: false
Description: The SMTP server socket write
timeout. By default, the value is set to 5
minutes.
Default value: 300000
MAIL_SOCKET_WRITE_TIMEOUT Min value: -9223372036854775808
Max value: 9223372036854775807
Introduced in release: ALM 12.01
Introduced in patch: 2
System: false
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 25/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 27/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Min value: 1
Max value: 9223372036854775807
Introduced in release: ALM 11.00
Introduced in patch: 06
System: false
Description: The maximum number of test
instances that server will handle per call, if there
is a call with more test instances than this value,
an exception will be threw causing this
operation to fail.
MAX_TEST_INSTANCES Min value: 1
Max value: 9223372036854775807
Introduced in release: ALM 11.00
Introduced in patch: 12
System: false
Description: The number of different threshold
values allowed under a single KPI.
Default value: 12
Min value: 1
MAX_THRESHOLD_VALUES_PER_KPI Max value: 9223372036854775807
Introduced in release: ALM 11.00
Introduced in patch: GA
System: false
Description: This parameter is to control users'
ability to add images into memo fields. The
optoins are: Y - Users are allowed to add
images into memo fields; N - Users are not
allowed to add images into memo fields;
AS_LINK - Users are allowed to add images
into memo fields but only as a link to an image
available in the entity's attachments.
MEMO_FIELD_ADD_IMAGE_MODE
Default value: Y
Allowed values: YNAS_LINK
Introduced in release: ALM 12.50
Introduced in patch: GA
Case sensitive: false
System: false
Description:
siteparams.MEMO_FIELD_AUTO_DOWNLOAD
_IMAGES.description
MEMO_FIELD_AUTO_DOWNLOAD_IMAGES Default value: N
Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
MUTE_SERVER_FOR_OOME Description: This is a fuse that will not set the
server status to MUTED when the server is
OutOfMemoryError.
Default value: Y
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 28/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 29/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
name>=true/false;<client type
name>=true/false; Default value for any client
type that is not defined specifically in this site
param is true.
Default value:
Allowed patterns: ^([^;=]+=[^;=]+;?)+$
Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: This parameter determines
whether ALM users can reset their passwords
using the Forgot Password link in the ALM
Login window. If this parameter is not defined or
if the parameter is set to 'N', users can reset
their passwords using the Forgot Password link.
PASSWORD_RESET_DISABLE If LDAP or External authentication is enabled,
the Forgot Password link is not shown.
Default value: N
Introduced in release: QC 10.00
Introduced in patch: GA
System: false
Description: Defines the minimum time in
minutes user should wait before he will get new
Forgot Password e-mail. Default is 5 minutes.
Default value: 5
PASSWORD_RESET_ELAPSED_TIME Min value: -9223372036854775808
Max value: 9223372036854775807
Introduced in release: QC 10.00
Introduced in patch: GA
System: false
Description: If a user clicks the Forgot
Password link in the ALM Login window, an
email notification is sent to the user with a link to
specify a new password. This parameter allows
you to override the default URL, or parts of the
URL, that is embedded in the reset link. Use
one of the following syntaxes: <server>:<port>.
PASSWORD_RESET_SERVER
Overrides both the default server and port.
<server>. Overrides the default server. <port>.
Overrides the default port.
Introduced in release: QC 10.00
Introduced in patch: GA
System: false
PASSWORD_RESET_VALID_PERIOD Description: Defines the maximum time in
hours that the link in the Forgot Password e-
mail is valid. Default is 24 hours.
Default value: 24
Min value: 0
Max value: 9223372036854775807
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 30/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Default value:
00:00:00,05:59:59,06:00:00,11:59:59,12:00:00,1
7:59:59,18:00:00,23:59:59
Allowed patterns: ((\d{2}\72){2}(\d{2}),)*
(\d{2}\72){2}(\d{2})
Introduced in release: ALM 11.51
Introduced in patch: GA
System: false
Description: Maximum number of projects that
ALM allows you to include in a graph. Default is
6.
Default value: 6
PROJECT_SELECTION_MAX_PROJECTS Min value: 1
Max value: 9223372036854775807
Introduced in release: QC 10.00
Introduced in patch: GA
System: false
Description:
siteparams.QC_SENSE_AUTHORIZATION_DI
SABLED.description
QC_SENSE_AUTHORIZATION_DISABLED Default value: N
Introduced in release: ALM 11.50
Introduced in patch: GA
System: false
Description: By default, only site administrator
users have access to QC Sense reports. This
parameter enables you to grant permissions to
additional users who are not site administrators.
Enter user names using the following syntax:
QC_SENSE_REPORTS_USERS
<user1>;<user2>;<user3>
Introduced in release: ALM 11.50
Introduced in patch: GA
System: false
Description: This parameter changes the order
of events raised when the user enters the
TestSet module.
RAISE_TESTSET_MOVETO_EVENT_AFTER_E Default value: N
NTER_MODULE Introduced in release: ALM 11.50
Introduced in patch: GA
System: false
REPLACE_TITLE Description: This parameter enables you to
change the names of ALM modules across all
your projects. Rename one or more modules by
entering the following parameter value: <original
title1 singular>;<new title1 singular>; <original
title1 plural>;<new title1 plural>; <original title2
singular>;<new title2 singular>;... For example,
if you want to change the name of the Defects
module to Bugs, and the Requirements module
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 32/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Min value: 1
Max value: 9223372036854775807
Introduced in release: ALM 11.00
Introduced in patch: GA
System: true
Description: The number of minutes a cached
project report result is valid.
Min value: 1
REPORT_RESULT_LIFESPAN Max value: 9223372036854775807
Introduced in release: ALM 11.50
Introduced in patch: GA
System: false
Description: This parameter enables you to
create a delay between the time of the cleaning
processes of each project repository and the
time the files without references are actually
deleted. Set a value in days between 0 and 28.
If the parameter does not exist, ALM delays the
deletion of obsolete files in the file system for
seven days. For details on the project repository
cleanup process, see Project Repository
REPOSITORY_GC_DELAY_CANDIDATE_TIME
Cleanup. Default is 7 days.
Default value: 7
Min value: 0
Max value: 28
Introduced in release: ALM 11.00
Introduced in patch: 3
System: false
Description: The parameter determines the
speed at which the repository cleanup process
is performed. Set a value between 0 (fastest)
and 10 (slowest). If the parameter does not
exist, the speed is set to 3. For more details on
the project repository cleanup process, see
Project Repository Cleanup.
REPOSITORY_GC_JOB_PRIORITY Default value: 3
Min value: 0
Max value: 10
Introduced in release: ALM 11.00
Introduced in patch: 3
System: false
REPOSITORY_GC_PROJECT_CLEANUP_INTER Description: This parameter defines the time
VAL interval in days between cleaning processes of
each project repository. Set a value in days
between 1 and 28. If the parameter does not
exist, ALM scans project repositories once
every seven days. For more details on the
project repository cleanup process, see Project
Repository Cleanup.
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 34/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Default value: 7
Min value: 1
Max value: 28
Introduced in release: ALM 11.00
Introduced in patch: 3
System: false
Description: The parameter determines the
speed at which files are copied from the old to
the new project repository. Set a value between
0 (fastest) and 10 (slowest). If the parameter
does not exist, the speed is set to 3. For more
details on the project repository migration
process,see Migrating the Repository.
REPOSITORY_MIGRATION_JOB_PRIORITY Default value: 3
Min value: 0
Max value: 10
Introduced in release: ALM 11.00
Introduced in patch: GA
System: false
Description: This parameter indicates max
requirements amount in library to handle it
without performance hit on the customer.
Min value: 1
REQUIREMENTS_LIBRARY_FUSE Max value: 9223372036854775807
Introduced in release: QC 10.00
Introduced in patch:
System: false
Description: This parameter indicates whether
rich text field will be used in author mode in web
client.
REQUIREMENT_AUTHOR_USE_RICHTEXT Default value: N
Introduced in release: ALM 12.00
Introduced in patch: GA
System: true
Description: If this parameter is set to Y
(default), then any change to a requirement field
automatically sets the Reviewed
(RQ_REQ_REVIEWED) field to Not Reviewed.
If it is set to N, then a change to a requirement
REQUIREMENT_REVIEWED_FIELD_AUTOMA
field does not affect the value of the Reviewed
TIC_UPDATE
field.
Introduced in release: ALM 11.00
Introduced in patch: GA
System: false
RESTAPI_ACCESS_APIKEY_ONLY Description: If set to Y, then only Micro Focus
internal tools and applications in a white list can
login with username + password by below Login
Resources.
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 35/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Default value: N
Introduced in release: ALM 12.60
Introduced in patch: GA
System: false
Description: This parameter maintain client
types with which customer can use to login.
Default value:
RESTAPI_WHITELIST_APIKEY Introduced in release: ALM 12.60
Introduced in patch: GA
System: false
Description: This parameter enables you to
access restricted-access SA server directories
using the OTA ExtendedStorage.ServerPath
property. If this parameter is set to NO, you can't
access the Site Administration (SA) directory
using the ExtendedStorage.ServerPath
property. If this parameter is set to ANY, you can
access the Site Administration (SA) directory
using the ExtendedStorage.ServerPath
property. If this parameter is set to ADMIN, you
RESTRICT_SA_SERVER_FOLDERS can access the Site Administration (SA)
directory using the
ExtendedStorage.ServerPath property only with
ALM admin users.
Default value: ANY
Allowed values: ANYNOADMIN
Introduced in release: ALM 12.55
Introduced in patch: 2
Case sensitive: false
System: true
RESTRICT_SERVER_FOLDERS Description: This parameter enables you to
access restricted-access server directories
using the OTA ExtendedStorage.ServerPath
property. If this parameter does not exist, or is
set to Y, you can only use the
ExtendedStorage.ServerPath property to
access the following directories: * the Site
Administration (SA) directory * the root directory
for a project * the attach subdirectory for a
project * the baseline snapshot of a library at a
specific point in time. It includes all the entities
defined in the library and the relationships
between them, such as coverage and
requirements traceability. You can compare
baselines to track changes in a project over
time, or use a baseline to reuse or share the
entities in a library. subdirectory for a project *
the checkouts subdirectory for a project * the
components subdirectory for a project * the hist
subdirectory for a project * the resources
subdirectory for a project * the StyleSheets
subdirectory for a project * the tests
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 36/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 37/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Min value: 1
Max value: 9223372036854775807
Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: REST API provides a tree sub-
resource for hierarchical entities. It retrieves an
entity collection sorted as an expanded tree.
REST API uses this parameter to limits the max
collection size that may be retrieved in a single
request. Note that the tree sub-resource does
not support paging, therefore the
REST_API_MAX_PAGE_SIZE parameter is
irrelevant for it. Default is 100 entities. Note:
REST_API_MAX_ENTITY_TREE_SIZE
higher values affect performance.
Default value: 100
Min value: 1
Max value: 9223372036854775807
Introduced in release: ALM 12.00
Introduced in patch: GA
System: false
Description: REST API supports paging
capabilities for most of the entity collection
retrieval. REST API uses this parameter to limits
the max page size that the consumer may ask.
Default is 2000 entities.
Default value: 2000
REST_API_MAX_PAGE_SIZE
Min value: 1
Max value: 9223372036854775807
Introduced in release: ALM 11.00
Introduced in patch: GA
System: false
Description: REST API supports paging
capabilities for most of the entity collection
retrieval. REST API uses this parameter to limits
the max page size with ancestors that the
consumer may ask. Default is 50 entities.
REST_API_MAX_PAGE_SIZE_WITH_ANCESTO Default value: 50
RS Min value: 1
Max value: 50
Introduced in release: ALM 11.00
Introduced in patch: GA
System: false
REST_API_PAGINATION_DEFAULT_LIMIT Description: The number of entities per page
returned by default with each GET operation on
a collection using the REST API (unless the API
consumer specifies a different entities page limit
for retrieval). The default is 100 entities.
Default value: 100
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 38/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
Min value: 1
Max value: 9223372036854775807
Introduced in release: ALM 12.20
Introduced in patch: GA
System: false
Description: REST API supports paging
capabilities for most of the entity collection
retrieval. REST API uses this parameter to limits
the amount of entities that the consumer may
request. Default is 2000 entities.
Default value: 2000
REST_API_PAGINATION_MAX_LIMIT
Min value: 1
Max value: 9223372036854775807
Introduced in release: ALM 12.20
Introduced in patch: GA
System: false
Description: Specifies timeout for ALM Robot
operations.
Default value: 1200
Min value: 1
REST_SA_CLIENT_TIMEOUT Max value: 9223372036854775807
Introduced in release: ALM 12.50
Introduced in patch: GA
System: true
Description: This parameter sets the REST API
session maximum idle time (in minutes). The
idle time is the amount of time a REST API
session token remains valid if there is no activity
in the session. After this period, the session
(including the licenses and locks that it holds)
expire. On the next call, the REST API
recreates a new session. The default value is 60
REST_SESSION_MAX_IDLE_TIME minutes.
Default value: 60
Min value: 1
Max value: 9223372036854775807
Introduced in release: ALM 11.00
Introduced in patch: GA
System: false
Description: This is a fuse that limits the max
queries can be fetched in each request, just to
protect the server from OutOfMemoryError.
Min value: 1
RUN_QUERY_MAX_RECORDS_COUNT Max value: 9223372036854775807
Introduced in release: ALM 11.00
Introduced in patch: 18
System: false
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 39/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 40/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 41/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
System: false
Description: By default, ALM checks that SQL
queries for an Excel reports do not include any
of the following commands: INSERT, DELETE,
UPDATE, DROP, CREATE, COMMIT,
ROLLBACK, ALTER, EXEC, EXECUTE,
MERGE, GRANT, REVOKE, SET, INTO, or
TRUNCATE. This ensures that you do not
inadvertently modify or delete records in the
project database. You can modify which
commands are on this list by adding this
SQL_QUERY_VALIDATION_BLACK_LIST parameter. The parameter's value must be a
comma-separated list of SQL commands that
ALM should verify are not included in SQL
queries for an Excel report. Note that this
verification is not performed if the
SQL_QUERY_VALIDATION_ENABLED
parameter exists and is set to N.
Introduced in release: ALM 11.00
Introduced in patch: GA
System: false
Description: By default, ALM checks SQL
queries in Excel reports to ensure that they are
valid and do not alter the project database. For
more information on this validation, see the
Micro Focus Application Lifecycle Management
User Guide: How to Generate an Excel Report.
If this parameter is set to N, this validation is not
SQL_QUERY_VALIDATION_ENABLED performed. If this parameter does not exist, is
empty, or is set to Y, this validation is performed.
Default value: Y
Introduced in release: ALM 11.00
Introduced in patch: GA
System: false
Description: Expiration time of the LWSSO
token (the authentication token of the REST
API) in minutes. After this period of inactivity, the
REST API consumer is required to re-
authenticate. The default value is 11 minutes.
Default value: 11
SSO_EXPIRATION_TIME
Min value: 1
Max value: 9223372036854775807
Introduced in release: ALM 11.00
Introduced in patch: GA
System: false
SSO_SECURE_ONLY_COOKIE Description: Mark the http cookie which
contains LWSSO token (the authentication
token of the REST API) with the Secure
attribute. It is meant to keep cookie
communication limited to encrypted
transmission, directing browsers to use cookies
only via secure/encrypted connections. This
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 42/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 44/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 46/47
28/1/2019 https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm
https://admhelp.microfocus.com/alm/en/12.60/api_refs/site_params/metadata.htm 47/47