Professional Documents
Culture Documents
USER MANUAL
CHM-01 COMPUTER HEALTH MONITOR
USER MANUAL
Disclaimer
We spared no efforts to make sure that the information in this
manual is correct and complete. However no liability is accepted for any
errors or omissions. Gembird Electronics reserves the right to change the
specifications of the hardware and software described in this manual
without prior notice.
No part of this manual may be reproduced, transmitted or translated
in any language in any form, by any means, without the prior written
permission of Gembird Electronics Ltd.
Gembird Electronics makes no warranties for damages resulting
from corrupted or lost data due to a mistaken operation or malfunction of
the product, the software, personal computers or peripheral devices.
Features
Suitable for the standard 5.25'' front bay of any desktop PC
LCD display with adjustable backlight
Indication of fan speed, date and time, temperature and hard disk
status
Measures the temperature inside computer case or CPU temperature
Overheating sound alarm
Adjusts cooling fan speed according to the temperature
Specifications
Backlight: red, green, blue, purple, white
Temperature modes: Celsius or Fahrenheit
Temperature alarm level setting
Fan speed control: low (2000 RPM), middle (3000 RPM), high (4000
RPM)
Buttons: RESET, MODE, SET, C/F (Celsius / Fahrenheit)
Dimensions: 148 x 42 x 68 mm
Net weight: 0.1 kg
Package Contents
Control unit
Power cable
Thermo-sensor cable
HDD cable
User manual
Introduction
Installation
To CHM-01
4-pin power
4黄
3黑
2黑
1红
connector
To power socket
of 5,25” device
Fan cable
1黑 1黑
2红 2红
3黄 3黄
To 3-pin
To CHM-01
3-pin fan
connector of the
cooling fan to be
connector
controlled
Note: please use 4 to 3 pin adapter (included) if the cooling fan you
wish to control uses 4-pin power connector.
To 2-pin HDD
LED on the
motherboard
1黑
2红
3红
4红
H. D. D. LE D 2黑
1红
To CHM-01
4-pin HDD Temperature
connector sensor
Cooler
Heat compound
CPU Socket
Warning: Make sure that the cooler fits CPU heat sink properly. In case of
any difficulties it is recommended to consult an experienced technician.
After you have connected all the cables please install CHM-01 into the
5,25” bay of computer case using the cross screwdriver.
RESET SET
MODE C/F
2 4
To change the color of the backlight – press the MODE button and
release it within a short (less than 1 second) time. Every time you push this
button the background color will be changed: red greed blue
purple white.
To set the date please, follow the steps below:
a) Press MODE button and hold it for at least 1 second. The Day digits
will start flashing. Push and hold the MODE button again to select the
other fields: Day Month Year Day…
b) To change the Day, Month or Year press C/F button several times
until you get the correct value.
If no button is pressed within 10 seconds then the chosen value will
stop blinking and will be saved in the memory.
3) SET button This button is used to set the time and temperature
alarm.
To set the time, please, follow the steps below:
a) Press and hold SET button for more than 1 second (but less than 3
seconds). The Hour digits will start flashing. Press the SET button and
release it within a short (less than 1 second) time. Every time you push this
button the other field will be selected: Hour Minutes Hour…
b) To change the Hour or Minute press C/F button several times until
you get the correct value.
To set the temperature alarm – press and hold the SET button for at
least 3 seconds. The Temperature digits will start flashing. To adjust the
value – press C/F button as many times as it is necessary. The alarm will
be given if the temperature exceeds the specified value.
If no button is pressed within 10 seconds then the chosen value will
stop blinking and will be saved in the memory.
Display overview
Temperature
Year
Day/
Month
Time
Caution