Professional Documents
Culture Documents
Telephone (985)-876-4117
info@bwbcontrols.com
ISO 9001 Certified
‘VENT’ CLOSURE
INSTALLATION
CONNECTION 1/4" NPTM 1/8” NPTM
MOUNTING Exhaust Port Orifice .156” (3.96 mm)
PRESSURE RATING 200 PSI (13.78 bar)
OPERATION
The BWB "VENT” Closure is a device which excludes dirt, insects, and corrosive atmospheres from
the internal parts of any safety system component. It is normally installed in the exhaust port(s) and
because of the small outside diameter, can be installed in very tight areas. The silicon excluder allows rapid
ventilation of pneumatic pressure.
FEATURES
All 316 Stainless Steel Construction
Silicon rubber excluder is replaceable
The “VENT” is NOT a breather
WEIGHT 1 ounce