Professional Documents
Culture Documents
Page 1 of 2
XP95A
Dual Action Addressable Manual Pull Station
Technical data
All data is supplied subject to change without notice. Specifications
are typical at 24 V, 73°F and 50% RH unless otherwise stated.
Compliance
Operation
The address of each pull station is set at the commissioning
stage by means of a seven-segment DIP-switch.
Pushing in, then pulling down on the handle causes it to latch
Product information in the down/activated position.
The XP95A Dual Action Addressable Manual Pull Station Once activated the yellow activated flag appears at the
features a translucent plastic panel at the centre enabling bottom of the pull station face. The pull station is reset by
visibility of an internal LED that indicates alarm condition and inserting the reset key into the top of the unit, this opens
polling status. the door which in turn resets the handle; closing the door
The pull station may be flush mounted on a single gang work automatically resets the switch.
box or by using the optional backbox.
• Control panel compatibility
• Key lock
• Easily reset
• LED visible even when the Pull Station is closed
• Lightweight polycarbonate housing
MANAGEMENT
SYSTEMS
MANAGEMENT
SYSTEMS
PRODUCT
CERTIFICATION
© Apollo Fire Detectors Ltd 2019
Assessed to ISO 9001:2015 Assessed to ISO 14001:2015 Cert/LPCB ref. 010
Cert/LPCB ref. 010 Cert/LPCB ref. 010 EMS
PP2581/2019/Issue1
Page 2 of 2