You are on page 1of 2

Driver assistance systems

System power supply for radar sensors CS520

PRODUCT BENEFITS
ff Precise, super-low noise analog power supply 1 CS520
for radar frontends
ff Fully integrated solution, specifically tailored
for radar sensors
ff High efficiency
ff Voltage monitoring and overcurrent protection
for all regulators
ff Safety watchdog
ff Clock input for external synchronization
ff Full operation down to 4 V
ff Designed for safety relevant applications up to ASIL C
Driver assistance systems System power supply for radar sensors CS520

super-low noise
12 Watt
maximum output power
analog supply
100 nV / √ Hz for 1 MHz < f < 10 MHz

TASK TECHNICAL CHARACTERISTICS


CS520 provides a super-low noise, highly stable supply voltage for
MMIC analog radar frontends. It also provides separate supply Supply for MMIC analog radar 3.3 V +/−1.5 % / 1.8 A
voltages for the digital MMIC parts, microcontroller and external components low noise LR
bus transceivers. A switchable supply output brings partial net-
Supply for MMIC digital radar 3.3 V / 0.8 A LR
work transceivers into safe state. All output voltages are monito-
components
red, a safety watchdog supervises the microcontroller. Fast bus
communication is supported by an integrated CAN FD transceiver. Supply for microcontroller 3.3 V / 1.8 A SMPS
and bus transceivers
FEATURES Switch for partial network 5 V / 100 mA
ff Battery voltage drop detector transceivers
ff SCON functionality (Q&A and window watchdog)
Operating temperature −40 °C…+125 °C
ff Built-in-self-test circuit (runs after power up)
ff SPI interface for control and diagnostics (CRC protected) Package TQFP64_ePad
ff CAN FD driver (wake up and diagnostic functionality)
ff Wake up pin
ff Reset functionality

Battery switch Vbatt mon

V drop detect V Drop

5V
3V
Regulator 3.3 VLN
3.3 VDig
Discharge
Ref Out

Voltage
Bandgap 1 Bandgap 2
monitoring

Digital circuit Selftest control


Reset
(register, control) (power-on)
Signal
Safety signal path
extCLK
Selftest path Watchdog, BIST,
during power-on (SCON) ERR, ASS
Test SPI CLK monitoring nASS
Vbatt path RSS
Safety relevant SPI
function block
Function block WAU CAN FD CAN FD

Robert Bosch GmbH | PO 10 60 50 | 70049 Stuttgart | Germany | www.bosch-semiconductors.com | www.bosch-mobility-solutions.com


Printed in Germany 292000P1P4-2017-AE © Robert Bosch GmbH 2017. All rights reserved, also regarding any disposal, exploitation, reproduction,
editing, distribution, as well as in the event of applications for industrial property rights.

You might also like