Professional Documents
Culture Documents
Installation Instruction transmitting device. For this reason, the TCF-142-M-ST does not
have any DIP switches or jumpers for setting the baudrate.
HA-06-272, October 2011
Features
Overview
• “Ring” or “Point to Point” transmission TCF-142-M-ST Standard 1"
Din-Rail
IMMUNITY FROM ELECTRICAL INTERFERENCE: Fiber optic contains the following items:
cable is not affected by electromagnetic interference or radio • 1 TCF-142-M-ST media converter Using a standard drywall self-tapping screw, mount the FN-ACC
frequency interference. It provides a clean communication path • Power jack to 3-pin terminal block adaptor (Battery Enclosure) to the drywall/wood/metal. The TCF-142-M-ST
and is immune to cross-talk. modules are required to be mounted inside of the FN-ACC and with-
• Stick-on pads
in 20ft of the panel/annunciator with all wiring in a conduit. It is also
INSULATION: Optical fiber is an insulator; the glass fiber • Installation Instruction (printed) required to be installed in the same room as the FACP or Network
eliminates the need for using electric currents as the NOTE: Please notify your sales representative if any of the Annunciator.
communication medium. above items are missing or damaged.
– 1– –2– –3–
Connecting 2-wire RS-485 Serial Devices configured to ON or both must be configured to OFF. Point to Point Transmission Half duplex
Ring Transmission Half duplex
2 individual fiber cables
Environmental Limits
Operating Temperature 0 to 60˚C (32 to 140˚F),
RX TX RX TX
5 to 93% RH
RX TX RX TX RX TX RX TX
– 4– –5– –6–