Professional Documents
Culture Documents
PFI PP HL PM ML PS PX PA Melt Blown Filter Cartridge
PFI Melt Blown Filter Cartridge is fusing and intertwined of polypropylene resin without any
chemical glues.The cartridges are glued at random to form 3D micro pore which will make the
cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber
and density form high filtration rating and pollutants holding capacity on diameter of filter
cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and
close inner, strong pollutants holding capacity, it can remove contaminant effectively, such as
suspended substance, particulate and rust, providing efficient filtration and long service life.
Applications
● Drinking Water Treatment ● Electronic ● Industrial Water Treatment
● Plating ● Chemicals, solvents
Features Specifications
Three layers structure cartridge offers high dirt holding Dimensions:
capacity,longer service life Outside Diameter: 60mm, 63mm, 110mm or up to
Formed by thermal bond without using any binders customers’ request
and adhesives. Inside Diameter: 28mm,30mm
100% Pure Polypropylene will not cause any pollution Length: 9.75”,9.87” 10”, 20”, 30”, 40”
to water
Wide Chemical compatibility Material of Construction:
Groove design to extend the filtration surface area. Filter media: PP
All kinds of adaptors are available. End caps: PP
FDA compliance material Cores: PP
Gaskets/O‐ring: Silicone, EPDM, NBR, Viton
Order Information
Normal Product Code: PFI PP‐Rating‐Length
PFI Rating Length Core Diameter End cap type Seal material
PP, HL , esc 01:1μm 10: 10" 20F‐222/Flat end V:Viton
Melt Blown 03:3μm 20: 20" 20N‐222/Fin S: Silicone
Non – OD 2.5” Slim
05:5μm 30: 30" 26F‐226/Flat end E:EPDM
BB – OD 4.5” Big
10:10μm 40: 40“ P : Polypropylene 26N‐226/Fin B:NBR
Core
25:25μm 50:50“ Non ‐ DOE
30:30μm 60:60”
50:50μm
75 – 300 μm
For Example: PFI PP‐05‐40 = PP,Rating: 5um,Length:40",DOE
TECHNICAL SPECIFICATIONS of PFI FILTER CARTRIDGE
Product Change‐out Filtration Max. Operating
Description Length Micron Efficiency
Code Pressure Diff. Type Temperature
PM Smooth Finish, None Core 10 ‐ 40" 1 ‐ 150 Nominal 0.25 ‐ 0.35 MPa Depth 83°C @ 0.15MPa
ML Smooth Finish, PP Core 10 ‐ 40" 1 ‐ 150 Nominal 0.25 ‐ 0.45 MPa Depth 83°C @ 0.15MPa
PP Heavy Duty Singed Treatment 10 ‐ 40" 1 ‐ 100 Absolute 0.25 ‐ 0.35 MPa Depth 83°C @ 0.15MPa
HL Heavy Duty Singled, PP Core 10 ‐ 40" 1 ‐ 100 Absolute 0.25 ‐ 0.45 MPa Depth 83°C @ 0.15MPa
PS Micro Grooved, None Core 10 ‐ 40" 1 ‐ 150 Nominal 0.25 ‐ 0.35 MPa Depth 83°C @ 0.15MPa
PX Grooved Finish, None Core 10 ‐ 40" 1 ‐ 150 Nominal 0.25 ‐ 0.35 MPa Depth 83°C @ 0.15MPa
PA Smooth Finish, None Core 10 ‐ 40" 1 ‐ 100 Absolute 0.25 ‐ 0.35 MPa Depth 83°C @ 0.15MPa
www.profilterindonesia.com print/USA/02/2001