Professional Documents
Culture Documents
Hfe - Amphion - Xenon - en 2
Hfe - Amphion - Xenon - en 2
Single/ bi-wiring
For bi-wiring purposes amphion
xenon is equipped with two pairs
of binding posts. Depending on
the market area the speakers
can be delivered with lintel
installed or separately. In case
the two pairs of binding posts are
attached with lintel for single amphion loudspeakers ltd, finland
No: www.amphion.fi
Bass Adjustment
or System BAS
Positioning amphion xenon is equipped with
BAS- (Bass Adjustment System),
the speaker which allows tuning the bass for
different room environments. The
xenons should be positioned as Usually the bass units should fire
bass adjustment can be done
adviced in the picture. Please note away from the closest boundary. If
as follows:
that we do not recommend to aim the speaker needs to be placed amphion loudspeakers ltd, finland
No:
model
impedance
max power
www.amphion.fi
xenon
8 ohm
250 W
speakers directly towards the listener, close to the wall we recommend 1. Highest zero-level. BAS binding
but slightly outside the shoulder area. aiming the bass units inwards. If post without a lintel.
rooms boundaries permit try
2. Middle level. Lintel between
The final positioning and identical aiming the bass units outside. The
BAS binding posts. Bass level will BAS Bass Adjustment System
aim of the speaker depend on the final placement will depend on the
Warning: Use only approved BAS components
personal taste. If the speakers need both alternatives. Please 3. Lintel between binding post
to positioned close to the walls, we remember that listening to music is and blocking the reflex tube.
recommend aiming the speakers a personal thing and therefore Bass level will be lowered by
more slightly inward toward the these positioning instructions act as further 1.5dB.
listening seat, but still not directly at guidelines only. Experiment with the The bass level can be lowered
the listener. positioning and find a position and by maximum of about 3 dB from
aim which you prefer, even if it the highest level.
does not correlate with the
guidelines. IMPORTANT, PLEASE NOTE: The lowest pair of binding posts are only meant
for BAS-system. Do not attach speaker cables to these binding posts.