Professional Documents
Culture Documents
ZFWG EST117 e PDF
ZFWG EST117 e PDF
Special features:
'NN':
It means 'waiting for gear selector neutral position' ('Not Neutral') and will be indicated when
ingnition is switched on while selector is not in neutral position.
When error indication on display is disabled then 'NN' also is displayed when any error occurs
which 'normally' would lead to a (driving program) reset and be indicated by an error number.
Errors which release no reset are not indicated at all (error nos. 02/42/10/50/21/61) in this case.
'EE':
Is indicated when display has time-out, i. e. gets no data from EST.
Mainly reasons: EST is in TOTAL RESET mode (due to output line-cut off or external power
supply at lines to the gear solenoid valves) or is without power or data wire is not properly
connected.
2. Monkey Wrench:
Starts flashing when an error has occured. Error can be read (alternating with 'normal' display
indication) when gear lever is switched to neutral position.
Data Sheet
The Transmission controls EST-17T, EST-19, EST-25 und EST-26 are compatible
with the controls EST117, EST119, EST125 und EST126!
EST-17T = EST117
EST-19 = EST119
EST-25 = EST125
EST-26 = EST126
So the „Blue Book“ is also useable for the new transmission controls.