Professional Documents
Culture Documents
Page 1 of 3
Shutdown SIS
Previous Screen
Product: VIBRATORY COMPACTOR
Model: CS-533E VIBRATORY COMPACTOR TJL
Configuration: CS-533E Soil Compactor TJL00001-UP (MACHINE) POWERED BY 3054C Engine
i02300831
Removal Procedure
Start By:
a. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
NOTICE
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 21/01/2022
CS-533E Soil Compactor TJL00001-UP (MACHINE) POWERED BY 3054C Engine(K... Page 2 of 3
Illustration 1 g01152129
1. Remove the setscrew (1). Remove the piston cooling jet assembly (2) from the cylinder block.
Note: The engine crankshaft may be rotated in order to access all of the piston cooling jet
assemblies.
Note: Ensure that the ball moves freely within the valve assembly of the piston cooling jet.
Check that the tube of the piston cooling jet assembly is not damaged.
Installation Procedure
NOTICE
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 21/01/2022
CS-533E Soil Compactor TJL00001-UP (MACHINE) POWERED BY 3054C Engine(K... Page 3 of 3
Illustration 2 g01152132
1. Install piston cooling jet assembly (2) to the cylinder block. Install the setscrew (1). Tighten the
setscrew (1) to a torque of 9 N·m (80 lb in).
Note: Ensure that piston cooling jet assembly (2) is properly located on the cylinder block.
Refer to the Specifications Manual, "Piston Cooling Jet" for the correct procedure for the
alignment of the piston cooling jet.
End By:
a. Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and
Install".
Copyright 1993 - 2022 Caterpillar Inc. Fri Jan 21 13:36:56 UTC+0900 2022
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 21/01/2022