Professional Documents
Culture Documents
Engine
o Design weight for the engine/muffler/mount is
1400Grams/50OZ
o The following combinations meet this weight:
OS 1.6/Bison pitts muffler/Dubro soft mount
YS1.4/Slimline pitts muffler/Dubro soft mount
Pitts style muffler
Flexible muffler extensions
Engine mount
o Soft mount is highly recommended
Throttle servo linkage
16 to 20 Ounce fuel tank
Foam padding for mounting radio and fuel tank
Heat shrink to secure radio donnections
Large tie straps for mounting radio and fuel tank
Fuel line, 24” minimum
In-line fuel filter
Fuel “dots” or other fueling system
Fuel pump if not included with motor
Main Wheels, 2 ¾”
Main gear axles, 1 ½” length minimum, diameter to fit
wheels
Wheel collars (4)
Tailwheel assembly
Kevlar thread (optional)
Carbon fiber rods (optional)
Monokote or Ultracote
o 4 rolls for wings
o 2 rolls for fuselage
Paint for cowl, wheel pants, and landing gear
Radio transmitter:
o Minimum 4 channel, computer
Will require an elevator splitter (not the same as a
“Y” harness).
o Recommended 8 channel or greater computer
Airborne radio equipment:
o Servos
Elevators
• 2 standard size
o 50 inch-ounce minimum
o 80 inch-ounce recommended
Rudder
• 1 standard size
o 40 inch-ounce minimum
o 130 inch-ounce recommended
Throttle
• 1 standard size
o 30 inch-ounce minimum
Ailerons – four possible options
• 2 standard size in lower wing
o 100 inch-ounce minimum
• 4 standard size outboard in wings
o 40 inch-ounce minimum
o 80 inch-ounces recommended
• 4 minis outboard in wings
o 40 inch-ounce minimum
o 80 inch-ounces recommended
• 4 minis direct drive
o 40 inch-ounce minimum
o 80 inch-ounces recommended
o Receiver
Four channel minimum
8 channel recommended
o Servo extensions:
3 - 18” for elevators and rudder
1 – 12” for throttle
Ailerons – to match your servo option
o Switch and charging jack
o Battery
4.8Volt with 1200ma gives 70 minutes flying
time.
6.0 volt with 1200ma gives 40 minutes flying time
o Elevator splitter – for non computer radio
8 Servo arms, single sided long arms
o Metal preferred for direct drive setup, although plastic
will work.