Professional Documents
Culture Documents
CALIBRATION
In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this
laboratory to perform the following calibrations1, 10:
I. Acoustical
Acoustical Levels –
Sound Level Meters, Noise
Dosimeters
94 dB, 104 dB & 31.5 Hz to 4 kHz, Octave 0.4 dB B&K model 4226
114 dB Step multifunction acoustic
calibrator
8 kHz 0.5 dB
Angle – Measure (1 to 90)° 42 arc seconds Sine bar, gage blocks &
comparator
Inside, Outside & Depth Up to 60 in 0.6R + (8L) µin Starrett model SS8A1X
Micrometers & SC88A1X gage block
set
Indicator Testers –
Thickness Gages –
Length Standards (1D)/ Up to 60 inches (11 + 1.1L) µin Agilent model 5530A
Micrometer Standards3, 8 LMS
DC Resistance –
Generate3 (cont)
AC Voltage –
Generate3
AC Voltage3 – Generate
(cont)
AC Voltage – Measure
AC/DC Difference, Fixed
Points
0.01 V 10 Hz 0.5 %
20 Hz 0.5 %
40 Hz 0.5 %
100 Hz 0.5 %
1 kHz 0.5 %
10 kHz 0.5 %
20 kHz 0.5 %
50 kHz 0.5 %
100 kHz 0.7 %
300 kHz 0.1 %
AC Voltage – Measure
AC/DC Difference, Fixed
Points (cont)
0.06 V 10 Hz 0.03 %
20 Hz 0.02 %
40 Hz 0.014 %
100 Hz 0.01 %
1 kHz 0.01 %
10 kHz 0.01 %
20 kHz 0.01 %
50 kHz 0.03 %
100 kHz 0.036 %
300 kHz 0.1 %
500 kHz 0.12 %
800 kHz 0.14 %
1 MHz 0.14 %
0.1 V 10 Hz 0.02 %
20 Hz 0.016 %
40 Hz 90 μV/V
100 Hz 90 μV/V
1 kHz 90 μV/V
10 kHz 90 μV/V
20 kHz 90 μV/V
50 kHz 0.011 %
100 kHz 0.02 %
300 kHz 0.038 %
500 kHz 0.05 %
800 kHz 0.06 %
1 MHz 0.06 %
AC Voltage – Measure
AC/DC Difference, Fixed
Points (cont)
0.6 V 10 Hz 0.016 %
20 Hz 0.014 %
40 Hz 50 μV/V
100 Hz 36 μV/V
1 kHz 36 μV/V
10 kHz 36 μV/V
20 kHz 36 μV/V
50 kHz 60 μV/V
100 kHz 90 μV/V
300 kHz 0.02 %
500 kHz 0.022 %
800 kHz 0.024 %
1 MHz 0.024 %
1V 10 Hz 0.024 %
20 Hz 0.01 %
40 Hz 44 μV/V
100 Hz 24 μV/V
1 kHz 24 μV/V
10 kHz 24 μV/V
20 kHz 24 μV/V
50 kHz 50 μV/V
100 kHz 60 μV/V
300 kHz 0.02 %
500 kHz 0.021 %
800 kHz 0.022 %
1 MHz 0.022 %
AC Voltage – Measure
AC/DC Difference, Fixed
Points (cont)
6V 10 Hz 0.024 %
20 Hz 80 μV/V
40 Hz 40 μV/V
100 Hz 18 μV/V
1 kHz 18 μV/V
10 kHz 18 μV/V
20 kHz 18 μV/V
50 kHz 50 μV/V
100 kHz 60 μV/V
300 kHz 0.02 %
500 kHz 0.021 %
800 kHz 0.022 %
1 MHz 0.022 %
10 V 10 Hz 0.024 %
20 Hz 90 μV/V
40 Hz 50 μV/V
100 Hz 24 μV/V
1 kHz 24 μV/V
10 kHz 24 μV/V
20 kHz 24 μV/V
50 kHz 40 μV/V
100 kHz 50 μV/V
300 kHz 0.02 %
500 kHz 0.021 %
800 kHz 0.022 %
1 MHz 0.022 %
AC Voltage – Measure
AC/DC Difference, Fixed
Points (cont)
60 V 10 Hz 0.024 %
20 Hz 80 μV/V
40 Hz 30 μV/V
100 Hz 30 μV/V
1 kHz 30 μV/V
10 kHz 30 μV/V
20 kHz 80 μV/V
50 kHz 90 μV/V
100 kHz 0.02 %
100 V 10 Hz 0.028 %
20 Hz 0.01 %
40 Hz 50 μV/V
100 Hz 40 μV/V
1 kHz 40 μV/V
10 kHz 40 μV/V
20 kHz 90 μV/V
50 kHz 0.01 %
200 V 10 Hz 0.028 %
20 Hz 0.01 %
40 Hz 50 μV/V
100 Hz 40 μV/V
1 kHz 40 μV/V
10 kHz 40 μV/V
20 kHz 90 μV/V
50 kHz 0.01 %
AC Voltage – Measure
AC/DC Difference, Fixed
Points (cont)
1000 V 10 Hz 0.038 %
20 Hz 90 μV/V
40 Hz 46 μV/V
100 Hz 46 μV/V
1 kHz 44 μV/V
10 kHz 44 μV/V
20 kHz 90 μV/V
50 kHz 0.012 %
AC High Voltage –
Measure3
AC Current – Generate3
AC Current – Generate3
(cont)
AC Current – Measure3
AC Current – Measure3
(cont)
Capacitance – Measure
Capacitance – Generate
Fixed Points
100 pf 1000 Hz 11 µF/F GR 1404-B
Ranged
(0.19 to 0.3999) nF 1 kHz 0.6 % + 0.01 nF Fluke 5522A
(0.4 to 1.0999) nF 0.5 % + 0.01 nF
(1.1 to 3.2999) nF 0.5 % + 0.01 nF
(3.3 to 10.9999) nF 0.25 % + 0.01nF
(11 to 32.999) nF 0.25 % + 0.1 nF
(33 to 109.999) nF 0.32 % + 0.1 nF
(110 to 329.999) nF 0.28 % + 0.3 nF
(0.33 μF to 1.099 99) μF 0.46 % + 1 nF
(1.1 to 3.299 999) μF 0.25 % + 3 nF
(3.3 to 10.9999) μF 0.33 % + 10 nF
(11 to 32.9999) μF 0.4 % + 30 nF
(33 to 109.9999) μF 0.64 % + 100 nF
(110 to 329.999) μF 0.45 % + 300 nF
(0.33 to 1.099 99) mF 0.45 % + 1 μF
(1.1 to 3.2999) mF 0.45 % + 3 μF
(3.3 to 10.9999) mF 0.45 % +10 μF
(11 to 32.9999) mF 0.75 % + 30 μF
(33 to 110) mF 1.1 % + 100 μF
Inductance – Measure
Inductance – Generate,
Fixed Points
Electrical Calibration of
Thermocouple Devices3 –
Electrical Calibration of
Thermocouple Devices3 –
(cont)
RF Absolute
Power – Measure
RF Absolute Power
– Measure (cont)
Attenuation – Measure
Attenuation – Generate
Coaxial – 1 dB Steps
Coaxial – 10 dB Steps
RF Power – Generate
250 kHz to 2 GHz (26 to > 20) dBm 1 dB Agilent E8257D signal
(20 to > 16) dBm 0.8 dB generator
(16 to > 10) dBm 0.6 dB
(10 to > 0) dBm 0.6 dB
(0 to -10) dBm 0.6 dB
(< 10 to -70) dBm 0.7 dB
(< 70 to -90) dBm 0.8 dB
RF Power – Generate
(cont)
(> 2 to 20) GHz (26 to > 20) dBm 1 dB Agilent E8257D signal
(20 to > 16) dBm 0.8 dB generator
(16 to > 10) dBm 0.8 dB
(10 to > 0) dBm 0.8 dB
(0 to -10) dBm 0.8 dB
(< 10 to -70) dBm 0.9 dB
(< 70 to -90) dBm 1 dB
RF High Power –
Generate
Empower RF systems power
(20 to 600) MHz 80 W 2.2 dB amplifier with Keysight
N1914A, N8482A power
meter/sensor & Narda
3020A directional coupler
(characterized using PNA
Surecal calibration system)
V. Fluid Quantities
Density (Specific (0 to 3) g/cm3 0.000 067 g/cm3 Mettler Toledo model DE45
Gravity) density meter
VI. Mechanical
(20 000 to 39 000) psi 8.3 psi High pressure pump with
Additel reference gage
Temperature – Measuring
Equipment (-80 to -10) °C 0.011 °C Isotech 796L, 785H, Hart
(-9 to 50) °C 0.007 °C model 7012, 6050, Fluke
(51 to 200) °C 0.012 °C 9144, 1590, Omega model
(201 to 500) °C 0.01 °C LMF 3550, Hart 1560
thermometer, Type R
thermocouple, SPRT
Rotational Speed3 –
1
This laboratory offers commercial calibration and field calibration service.
2
Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement
that a laboratory can achieve within its scope of accreditation when performing more or less routine
calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent
expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage
factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory
may be greater than the CMC due to the behavior of the customer’s device and to influences from the
circumstances of the specific calibration.
3
Field calibration service is available for this calibration. Please note the actual measurement uncertainties
achievable on a customer's site can normally be expected to be larger than the CMC found on the A2LA
Scope. Allowance must be made for aspects such as the environment at the place of calibration and for
other possible adverse effects such as those caused by transportation of the calibration equipment. The
usual allowance for the actual uncertainty introduced by the item being calibrated, (e.g. resolution) must
also be considered and this, on its own, could result in the actual measurement uncertainty achievable on
a customer’s site being larger than the CMC.
4
In the statement of CMC, the value is defined as the percentage of reading, unless otherwise noted.
5
The measurands stated are measured with the Fluke 8508A or Fluke 792A. This capability is suitable for
the calibration of the devices intended to generate the measurand in the ranges indicated. CMCs are
expressed as either a specific value that covers the full range or as a combination of a percent/fraction of
the reading/output plus a range specification.
6
The measurands stated are generated with the Fluke 5500 series of instruments or Fluke 5700A/EP. This
capability is suitable for the calibration of the devices intended to measure the stated measurand in the
ranges indicated. CMCs are expressed as either a specific value that covers the full range or as a
combination of a percent/fraction of the reading/output plus a range specification.
7
In the statement of CMC, L is the numerical value of the nominal length of the device measured in inches,
D is the numerical value of the nominal diameter of the device measured in inches, and R is the resolution
of the unit under test.
8
This laboratory meets R205 – Specific Requirements: Calibration Laboratory Accreditation Program for
the types of dimensional tests listed above and is considered equivalent to that of a calibration.
9
"LabMaster" is a registered trademark with a last listed owner of Pratt & Whitney Measurement
Systems, Inc., Connecticut U.S.A.
10
This scope meets A2LA’s P112 Flexible Scope Policy.
Calibration
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This laboratory also meets R205 – Specific
Requirements: Calibration Laboratory Accreditation Program. This accreditation demonstrates technical competence for a
defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
_______________________
Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 3097.01
Valid to January 31, 2023
For the calibrations to which this accreditation applies, please refer to the laboratory’s Calibration Scope of Accreditation.