Professional Documents
Culture Documents
Risk Based Inspection Question Bank
Risk Based Inspection Question Bank
8. Deterioration for specific process equipment is not available, this can be sourced
from
a) Published data
b) Experience with other similar equipment.
c) Previous inspection data.
d) All the above.
9. If the material of construction and internal/external conditions are the same
a) Inspection results can be related from one equipment can be related to the
other equipment.
b) We cannot do that, since we donot know about it.
c) Need to consult Equipment Engineer for final decision.
Risk Based Inspection Question Bank
10. Failure mode can primarily affects the
a) Magnitude
b) Consequences
c) A & B
11. No deterioration found in the inspection program but still failure can occur under
the following conditions.
a) During plant construction period.
b) As a result of change or process upset condition.
c) All the above.
12. Aqueous chloride solution is carried into a sensitized stainless steel vessel, the
following cracking mechanism takes very rapidly depending on temperature.
a) Sulphide stress corrosion cracking
b) Leak can occur
c) Chloride stress corrosion cracking.
13. If operating condition have changed, deterioration rates based on inspection data
from the previous operating conditions
a) Valid till the equipment exists with any change
b) May not be valid.
c) Can be valid with some correction by engineers.
18. Method used for consequence analysis should demonstrate the ability to provide
a) Just an analysis
b) No out put is required
c) The required level of discrimination between higher and lower
consequence equipment items.
20. Which of the following measures are not covered under consequence analysis?
a) Safety
b) Cost
c) Affected area
d) Environment damage
e) None of the above.
23. RBI program will not consider the following release of common liquids such as
a) Hotwater, Steam
b) Acids
c) Caustics.
d) None of the above.
27. Users across the world will refer for more information on Risk acceptance.
a) ASME sec VIII
Risk Based Inspection Question Bank
b) API 579, fitness for purpose.
c) A comparison of criteria for acceptance of Risk by Pressure vessel
research council.
d) None of the above.
28. Inspection and maintenance planning using risk assessment will follow
a) Items/ equipment require inspection
b) Inspection Technique
c) Extent of inspection.
d) All the above.
29. Sensitive analysis will help in improving the risk anlysis.
a) Quality and accuracy
b) Benefit cannot be achieved.
c) Will drastically adverse the quality and accuracy.