Cost Acc. Code: Vendor: Item no.: 1 1 Equipment name : Number required (incl. spare) : 1 2 Liquid pumped : Capacity normal: m³/h ; rated : m³/h 3 Operation : Discharge pressure at rated capacity : barg Process and operating data
4 Solids : 0 %; max. size : mm Suction pressure min. : barg
5 Corrosive/Erosive service : Suction pressure max. : barg 6 Pumping temperature (p.t.) : °C Differential pressure : bar 7 Pumping temperature max. : °C Differential head : m. liq. 8 Density at pumping temperature : kg/m³ Shut-off head : m. liq. 9 Viscosity at pumping temperature : mPa.s NPSH available : m. liq. ### Vapour pressure at pumping temp. : bara NPSH required : m. liq. ### Area classification : Shut-off head max. allowable : m. liq. ### * to be stated by vendor Minimum continuous flow : m³/h ### Manufacturer (MFR) : Nozzles Nom. diameter Rating Type/Fac. Pos. ### Standard applicable : Suction ### Model : Discharge ### Location : Vent ### Arrangement : Drain ### Rotation facing coupling : * Cooling ### Suction : Flushing ### Number of stages : ### Self priming : Hydraulic power at rated capacity : kW ### Design pressure : 10 barg Hydraulic efficiency at rated capacit: % ### Design temperature : 120 °C Power required : kW ### Max. allow. operating pressure : 12 barg Power installed : kW ### Casing split : Pump speed : rpm ### Impeller type : Driver speed : rpm ### Impeller diameter supplied : mm Pump drive : ### Impeller diameter min : mm ; max : mm Driver type : Mechanical data
### Driver supply :
### Bearings : axial Type: Weight pump : kg ### Bearings : radial Type: Weight base pla : kg ### Bearings : intermittent Type: Weight driver : kg ### Bearing lubrication : Shipping weight : kg ### Common base plate Required : ### for pump and driver By MFR : Test Required Witnessed ### Coupling : Type : Performance ### Coupling guard : Type : Hydrostatic ### Foundation bolts : by MFR: NPSH ### Total pump length : Mechanical seal data
### Minimum water levell : MFR : Type :
### Smothering gland : : Flushing liquid : ### Shipment of seal : Flushing liquid flow rate : m³/h ### Casing/bearing/seals/none/ Flushing liquid design pressure : barg ### Cooling/Heating * Medium : Flushing system acc. API-610 plan no. : ### Consumptio : kg/h Auxiliary piping by pump MFR : ### Design pressu : barg Seal by pump MFR : ### Stuffing box: number of rings : ### Casing and cover : Column : ### Casing wear ring : Sleeve Bearings : ### Impeller : Discharge Head : Material