PAMANTASAN NG LUNGSOD NG MAYNILA »»
Pe 17 i"
UNIVERSITY OF THE CITY OF MANILA art iy! W
INTRAMUROS, MANILA, PHILIPPINES i 3
. A
COURSE CODE: ARB-126-2
SCHEDULE: FRI + SAT: 1-
230PM; COURSE CODE:
ARB-125.5
SCHEDULE: WED+THURS: 7:00-
PART 01: IDENTIFICATION AND 830PM
DISCUSSION
1. WHAT ARE THE THREE (3) PART SECTION OF SPECIFICATIONS ? IDENTIFY
AND EXPLAIN EACH. (10-POINTS)
~ It is the G, P, and E that stands for General, Product, and Execution. The “General” describes the
certain product, also includes the kind of materials used. “Product” refers to the components of the
certain product and the process of making it. Lastly the “Execution” is the process of installation and
how will it be used.
2. WHAT ARE THE DIFFERENT TYPES OF SPECIFICATIONS? DISCUSS AND PROVIDE
EXAMPLE FOR EACH TYPE. (10-POINTS)
- There are 4 types of specifications, The Open Specifications, Closed Specifications, Brand Name
Specifications, And Combination Specifications. The “Open Specification” refers to the generalized
requirements. “Closed Speculation” pertains to complying to a specific specifications. “Brand Name
Specifications” from the word itself, it refers to complying specifications by it’s “Brand Name”.
Lastly the “Combination Specifications” which includes two or more types of specifications.
3. ENUMERATE THE 16 DIVISION OF THE MASTER FORMAT AND PROVIDE
SAMPLE FOR EACH DIVISION/ CATEGORY AND EXPLAIN WHY YOU INCLUDED
THE SAMPLE IN THE CATEGORY. (10-POINTS)
Division 01 -General Requirements
Contractual Requirements comes first in to my mind when I see the 1°' division because it is one of the most important.
Division 02 -Site Construction
Demolition of existing buildings because it is what I commonly see.
Division 03 -Concrete
Specially placed concrete cause it’s special
ivision 04 Masonry
Bricks because I remember that our church that I used to serve is made out of bricks.
Division 05 -Metals
Steel because it isa type of metal.
Division 06 -Wood and Plastics
Architectural Woodwork because my grandfather used to build bahay kubo.
Division 07 -Thermal and Moisture Protection
Roof Materials because it is one of the important parts of a house.
Division 08 -Doors and Windows
‘Wood and Plastic Doors because that is what I commonly see inside our my house.
mn 09 -Finishes
ing because this reminds me when my family painted our room.
mn 10 -Specialties
Division 11 -Equipment
wry Equipment because this is what I commonly do.
Division 12 -Furnishings
Artworks because my mother loves it
Division 13 -Special Construction
‘Swimming pool because it is my dream to have a pool.
Division 14 -Conveying Systems
Elevator because it reminds me of malls.
Division 15 -Mechanical
Plumbing because it reminds me of my plumbing course.
Division 16 -Electrical
Lighting because itis necessary in a house.PART 02: CATEGORIZED THE FOLLOWING UNDER THEIR
RESPECTIVE DIVISIONAL MASTERFORMAT. (10-POINTS)
1, COMPUTER SET 6. PERGOLA
- DIVISION 16 - DIVISION 13
2. HAND DRILL 7. CONSTRUCTION NAILS
- DIVISION 2 - DIVISION 2
3. WOODEN DOORS 8. CURTAIN RODS
- DIVISION 8 - DIVISION 10
4,GREEN WALLS 9. WATER FOUNTAIN
- DIVISION 9 - DIVISION 13
5. SWIMMING POOL 10. EXTENSION WIRES
- DIVISION 13 - DIVISION 16
PART 03: SPECIFICATION WRITING. (10-POINTS) WRITE THE
MATERIAL SPECIFICATION OF THE OBJECT BELOW USING THE
TECHNICAL DATA PROVIDED.
Rebated Bullnose Coping
400 x 400 x 40/20mm
JET BLACK GRANITE TILE FOR COUNTER TOPS
SPECIFICATIONS
CLASSIFICATION JET BLACK GRANITE
RECOMMENDED
‘APPLICATION COUNTER TOPS
stanoano | REBATED BULLNOSE COPING
SPECIFICATIONS TILES 20MM THICKNESS
400MM x 400MM x 40MM
EXAM 01: MATERIALS IN BUILDING
SPECIFICATIONS | MASTERFORMAT
‘SUBMISSION: SEPTEMBER 30, 2021