Professional Documents
Culture Documents
ADU4518R1v06 - 2017
ADU4518R1v06 - 2017
Antenna Specifications
Electrical Properties
2 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880 1850 - 1990 1920 - 2170 2170 - 2200
High Band
Polarization +45° , -45°
2-8 Ports
Electrical downtilt (°) 0 - 10 , continuously adjustable, each band separately
at mid Tilt 17.6 18.0 18.2 18.1
Gain (dBi)
over all Tilts 17.5 ±0.5 17.8 ±0.4 18.0 ±0.4 17.9 ±0.4
Side lobe suppression for first
> 20 > 18 > 18 > 17
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 67 ±3 66 ±3 64 ±5 61 ±4
Vertical 3dB beam width (°) 7.4 ±0.4 6.9 ±0.4 6.5 ±0.6 6.0 ±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 30
Interband isolation (dB) ≥ 30 (1710 - 2200 // 1710 - 2200 MHz)
Front to back ratio, ±30°(dB) > 27 > 27 > 26 > 26
Cross polar ratio (dB) 0° > 22 > 22 > 21 > 18
Max. power per input (W) 300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm) 1365 x 269 x 86
Packing dimensions (H x W x D) (mm) 1680 x 340 x 155
Antenna weight (kg) 10.6
Clamps weight (kg) 2.9 (2 units)
Antenna packing weight (kg) 17.6 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
1274
Accessories
Item Model Description Weight Units per antenna
Mechanical downtilt:
Downtilt kit ASMDT0B01 1.3 kg 1 (Separate packing)
0 - 16 °
51
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R
EasyRET 4-Port Antenna with 2 Integrated RCUs - 1.4m
Model: ADU4518R1v06
Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 5 (motor activated, 12V)
Power consumption (W)
< 0.5 (stand by, 12V)
Adjustment time (full range) (s) < 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET
antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more
details about protocol switching function, contact Huawei before system installation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55022 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM
HWMxxx……..bL
HWMxxx…...bbR bL bbR
52