Professional Documents
Culture Documents
www.rode.com
INTRODUCTION
Thank you for investing in the RØDE Lavalier microphone.
Featuring the pure, clear audio and low handling noise that
RØDE is celebrated for, the Lavalier is built to deliver and to
last.
Peter Freedman AM
RØDE Microphones
Sydney, Australia
-3-
F E AT U R E S
ERGONOMIC DESIGN
U N I V E R S A L C O M PAT I B I L I T Y
-4-
L AVA L I ER & ACC E S S O R I E S
1. RØDE Lavalier with Shielded Kevlar® reinforced-
cable
2. Anti-trauma water resistant storage case
3. Water resistant pop filter
4. Mini-furry for high wind protection
5. Lapel-style cable management clip
6. Adjustment tools
7. Sanitary cleansing wipes
2.
1.
4. 3. 5.
7. 6.
*MiCon™ adaptors sold separately -
see rode.com/lavalier for a full list of compatibility
-5-
S PE C I F I C AT I O N S
Acoustic Principle: Permanently polarised condenser
-6-
S PE C I F I C AT I O N S
FREQUENCY RANGE
20
10
dB re 1 V/Pa
-10
-20
-30
POLAR RESPONSE
+5.0
0.0
-2.0 -2.0
-4.0
-6.0
-8.0
-10.0 -10.0
-12.0
-14.0
-16.0
-18.0
-20.0 -20.0
-22.0
-24.0
-25.0
dB rel. 1V/Pa
Frequency:
500 Hz:
1000 Hz:
4000 Hz:
-7-
M I C PL AC EM EN T
For the best performance, the Lavalier microphone should
be positioned as close as possible to the sound source,
without being subject to clothing rustle, gusts of air or dust.
Also ensure the mic is pointed as much as is convenient
towards the user’s mouth.
-8-
FIT TING AND C ABLING
To fit your Lavalier onto clothing and connect to your
wireless system, mount the Lavalier into the provided lapel
clip. Hold the clip between two fingers, with one finger
pressing down on the end of the wire loop. This will create
enough leeway to insert your Lavalier through the wire.
-9-
FIT TING AND C ABLING
Rest the mic in the loop so that the wire encircles one of the
grooves on the mic’s body. Once you ease off your grip on
the wire, the microphone will be held securely in place.
- 10 -
FIT TING AND C ABLING
To connect your Lavalier to your wireless system, securely
fasten the corresponding adaptor to the other end of your
MiCon™ cable. The RØDE spanner can assist you in this
assembly.
MiCon™ CONNECTION
MiCon™ CABLE
MiCon™ ADAPTOR
Plug the adaptor into your wireless system and you’re ready
to go.
- 11 -
I N C L U D E D ACC E S S O R I E S
W AT E R R E S I S TA N T P O P F I LT E R
To correctly fit your pop filter, slide the filter over the Lavalier
until it reaches the first groove. Pushing the filter any further
down will result in decreased protection of the capsule.
- 12 -
I N C L U D E D ACC E S S O R I E S
MINI-FURRY
- 13 -
S TO R AG E & C A R E
When not in use, always keep your Lavalier in the storage
case provided. Close and snap the storage case for
complete protection.
- 14 -
WA R R A N T Y / S U PP O R T
All RØDE microphones are guaranteed for one year from the
date of purchase. The Lavalier warranty may be extended to
a full five year period. Extending your warranty is completely
free of charge – simply register your purchase details on the
RØDE website at www.rode.com/warranty*
- 15 -