Professional Documents
Culture Documents
TABLE
American Gaming & Electronics Locations
Florida
American Gaming & Electronics
OF
2046 McKinley Street
Hollywood, FL 33020
CONTENTS
954-922-9952
954-922-1855 (Fax) Buyers Guide
Dave Mysel
dmysel@age-gaming.com
Table of Contents
Midwest
American Gaming & Electronics Chemicals...........................................................2
9500 W. 55th Street, Suite A
McCook, IL 60525
888-438-6299 Coin Mechanisms...............................................25
815-248-4395 (Fax)
Mike Mazzaroli
mmazzaroli@age-gaming.com Electrical.............................................................37
Matt Mazzaroli
tmazzaroli@age-gaming.com
Gaming...............................................................67
Nevada & California
American Gaming & Electronics
6255 McLeod Drive, Suite 20 Ithaca..................................................................71
Las Vegas, NV 89120
702-798-5752 JCM....................................................................77
800-727-6807
702-798-5762 (Fax)
Jerry Roed - Las Vegas/ Southern California Kroy.....................................................................81
jroed@age-gaming.com
Joe Karlowicz - Reno/ Northern California
jkarlowicz@age-gaming.com S Plus.................................................................87
775-786-8112
775-786-5446 (Fax)
Tools...................................................................95
New Jersey
American Gaming & Electronics
202 West Parkway Drive Touch Screens-3M................................................103
Egg Harbor Twp., NJ 08234
609-383-9970
800-890-9298 Wells-Gardner....................................................105
609-383-9971 (Fax)
TABLE OF CONTENTS 1
Chemicals
CHEMICAL • ACCESSORIES
Applicators
COTTON TIP APPLICATORS FOAM TIP APPLICATORS ANTISTATIC APPLICATORS
BOTTLE WITH TRIGGER, 16 OZ., PART NO. 19-765 4 OZ., PART NO. 10-0284-0000
SPRAY/STREAM TRIGGER ONLY, PART NO. 19-830
CHEMICAL • ACCESSORIES
Bottles & Dispensers Con’t
CHEMICAL INJECTOR, NEEDLE TYPE THE PUMP AIR-POWERED SPRAY BOTTLE
WITH VIAL
The Pump is a new air-powered spray bottle that
Needle type injector, supplied with 1 oz. vial. Ideal for provides an environmentally conscious alternative to
contact cleaners, light oils, etc. conventional aerosols. The refillable, reusable spray bot-
tle uses air as a propellant with its self-contained
INJECTOR W/ 1 OZ. VIAL, PART NO. 8383 Air Pump. Save money with The Pump by buying
liquid solvents in bulk. Use with cleaners, degreasers,
alcohol, CFC s, HCFC s and other chemicals.
Dispense only as much fluid as needed for the job. No Designed for easy one-handed delivery of a wide variety
stopper or cap to remove. One-handed touch on the of liquids onto a cloth, cleaning pad, cotton ball or other
dish dispenses the required amount of fluid, leaving wipe-on applicators. Can conveniently apply polishes,
the other hand free. Liquid in bottle stays clean until removers or other liquid products onto the applicator
used. Fluid pumped into dish doesn t drip back into eliminating direct hand contact, spillage, fumes and
bottle. Not for use with iodine, acids or bases. waste while protecting product quality.The locking top
makes this product excellent for use in the technician s
4 OZ. BOTTLE W/ PUMP, PART NO. 19-764 tool box.
6 OZ. BOTTLE W/ PUMP, PART NO. 19-766
8 OZ. BOTTLE W/ PUMP, PART NO. 19-768 4 OZ., PART NO. 19-774
ACID BRUSHES ACID BRUSH NO. 1, 6 IN. HANDLE, 3/8 IN. W, 4/PACK
PART NO. 10-0251-0000
Wipes
Soft non-woven GC wipes with the strength of polyester rayon. Safe for Folded napkin saturated with a mildly fragrant cleansing lotion. Excellent
critical applications. Provides excellent contamination control on precise foroffice, recreational, travel, camping and home use.
instrumentation, semiconductors and other critical uses.
INDIVIDUALLY PACKAGED, 1000/BOX, PART NO. 178040
Applications - For clean rooms, cleaning photo processing equipment,
wiping laboratory instrumentation and computer screens. Resistant to
most solvents, alcohols and dilute acids. High liquid retention. Willnot
abrade surfaces.
A one-drop applicator for all-purpose, instant household Super strength adhesive in a gel form will not drip
repairs. Ideal for most surfaces including wood, plastic, or run. Fills gaps well.
metal, rubber, glass, and ceramic. Handy base holds
tube for easy application. Airtight, leak-proof cap keeps 0.101 FL. OZ. TUBE, PART NO. 19-0117-0000
glue from drying out.
Forms strong, lasting bonds in seconds between either Medium viscosity formula for efficient wicking action and
similar or dissimilar materials metal, porcelain, plastic, faster curing time. Excellent for bonding any
glass, most rubbers, hardwoods, and other non-porous combination of plastic, rubber or metalparts. This grade
materials with smooth, close-fitting surfaces. The bond is ideal for small or fine work on non-porous, smooth sur-
resists softening at temperatures up to 320 F (160 C). faces. It fills gaps of 0.003-0.005 . Highly
Cures to a strength of 5000 psi. Because it is solvent- resistant to acid, alkali, alkali water, solvents and
free, there is no shrinking during curing and no solvent fungus. Non-toxic.
fumes. Fills gaps to 0.003".
0.075 FL. OZ. TUBE, PART NO. 10-120
1 FL. OZ., PART NO. 10-128
GR-R-RIP
CHEMICAL • ADHESIVES
Epoxy Adhesives
Electrically conductive two part epoxy for attaching GC epoxy putty is a two part epoxy in a single tube.
electrical components. Mix ratio: 1/1. Pot life: 40 min. Amount needed is cut off and kneaded together. Two
Cure: 24 hours. Vol. res.: 5.0 x 10-3 ohm-cm max. minute work life. Dielectric strength: 400 volts/mil. Sets
hard in 20 minutes. May be drilled and tapped. Max. use-
6 GRAM KIT, PART NO. 19-2092-0000 ful temp. 300” F.
5 hour set versatile epoxy cement particularly suitable EPOXY SUPER GLUE
for cementing non-porous materials. Cures at room tem-
perature. Bond strength of over 3000 psi. Will not shrink Provides an exceptionally hard and strong bond. Good
through curing. Resistant to water, solvents, heat, cold dielectric properties. Gray-white in color with fillers added to
and fungus. Excellent dielectric properties. Mix in equal increase viscosity and make it non-running. May be used to
parts from two tubes. fillgaps or to replace broken sections. Bonds may be over-
filled and filed or sanded after curing.
TWO 2 FL. OZ. TUBES, PART NO. 10-0347-0000
TWO 3/4 FL. OZ. TUBES, PART NO. 10-100
GC POTTING EPOXY
QUIK STIK, 5 MINUTE EPOXY
Black opaque epoxy used for potting and encapsulating
electronic circuits. Use to environmentally protect or con- 5 minute set, clear, fast-curing epoxy adhesive. In view of
ceal circuits. This product is excellent when used with its short pot life, use is recommended when a single repair
chassis boxes. Working time (pot life): 1 hr.;mixratio: must be made and the mixed adhesives can be used with-
1 to 1; temperature range: 40 to 180 F; volume resis- in one or two minutes. Cemented items can be safely han-
tivity: 1012 @ 300 F; dielectric constant: 4.2 (104 CPS dled within eight to twelve minutes, with full hardness
@ 77 F); dissipation factor: 0.014 (104 CPS @ 77 F). obtained after several hours. This cement is relatively thin
in consistency and should be used to cement closely
TWO 4 OZ. BOTTLES, PART NO. 19-823 matching surfaces. The glue line is usually invisible.
TWO 9 OZ. BOTTLES, PART NO. 19-824
DOUBLE SYRINGE, 30 CC., PART NO. 19-822
TWO 1/2 FL. OZ. TUBES, PART NO. 10-114
Cement Adhesives
Consists of solvent for acrylics (plexiglass, lucite and oth- A quick-drying and waterproof clear adhesive which forms
ers), slightly thickened with dissolved acrylic resin. a strong, hard, but vibration-resistant bond with minimal
It actually welds items made of plexiglass. The joint shrinkage. A true universal adhesive for shop, industry,
is usually invisible and stronger than the material itself. home and hobby use. Ideal for speaker repairs. May also
Cementsmany items used in electronics, for decorative or be used for gluing porous or semi-porous materials to
functional purposes, as well as acrylic signs, art objects, each other or to metals, plastics, etc. Not suitable for
and decorative pieces. metal-to-metal, glass-to-metal or other non-porous to non-
porous surfaces.
2 FL. OZ. BOTTLE W/ BRUSH, PART NO. 10-4002-0000
8 FL. OZ. BOTTLE W/ BRUSH, PART NO. 10-4008-0000 2 FL. OZ., PART NO. 10-0302-0000
1 GAL. CAN, PART NO. 10-0310-0000
Thermoplastic adhesive based on synthetic components A heavy-bodied, black rubber-based cement with out-
with unusually strong bonding characteristics to most mate- standing bonding qualities to many materials such as
rials. Produces a waterproof, resilient and long-lasting flex- natural and synthetic rubber, metal, wood and plastics.
ible bond. Light tan in color.Its uses range from cementing Dries quickly and produces a lasting, flexible bond which
paper and cardboard to the cementing of electronic compo- often exceeds the strength of the material itself. Used to
nents to circuit boards and chassis. Sticks well to all metals cement any rubber or flexible plastic part to cabinets,
and glass. Dries in 15 to 30 minutes. chassis or panels; also for gaskets, weather strips,etc.
2 FL. OZ. BOTTLE W/ BRUSH, PART NO. 10-4302-0000 2 FL. OZ. BOTTLE W/ BRUSH, PART NO. 10-0352-0000
8 FL. OZ. BOTTLE W/ BRUSH, PART NO. 10-4308-0000
Silicone Adhesives
ELECTRONIC GRADE SILICONE SILICONE CAULK TUBE
SEALANT/ ADHESIVE, CLEAR
This industrial RTV silicone is a one-part high modulus
One part non-corrosive, neutral cure electronic grade sealant/adhesive and gasketing material. Remains
silicone sealant. Will remain flexible from - 70” F to flexible from -80 F to +400 F (-63 C to +205 C). Will
+300” F (-60” C to +200” C). An excellent adhesive for not crack, crumble or dry out. Unaffected by ultra-violet,
many electrical and electronic applications where corro- weather, most chemicals and solvents. Adheres to
sion to metals is a problem. Good dielectric properties, metal, wood, glass. fiberglass, ceramics, fabrics and
high surface resistivity and resists electrical tracking. many plastics.
3 FL. OZ. TUBE, PART NO. 19-0155-0000 10.2 FL. OZ., PART NO. EL-0615-0000
SILICONE RUBBER ADHESIVE/ SEALANT nents, bonding gaskets for heating and refrigeration units, formed-in-
place gaskets for gear boxes, compressors, pumps and outdoor
One-component elastomer cures to a tough, rubbery solid motor covers, pressure sealing of aircraft cabins and cockpits, caulk-
when exposed to moisture in the air. Designed to fulfill indus- ing sheet metalstacks, duct-work and equipment housings, and as
trial and electronic service sealing and bonding requirements, an anti-abrasion coating.
this sealant has excellent adhesive strength, high elongation
and outstanding insulation and heat resistance qualities. Volume resistivity: ohm-cm 1.5 X 1015
Develops primerless adhesion to a variety of materials, Dielectric strength: volts/mil 550
including metal, glass, most wood, silicone resin, vulcanized Dielectric constant:
silicone rubber, ceramic, natural and synthetic fibers; most at 60 Hz 2.8 at 100 Hz 2.8 at 100 kHz 2.8
plastics and painted surfaces. Resists weathering, vibration Dissipation factor:
and exposure to oil, moisture, ozone, and at 60 Hz 0.0015 at 100 Hz 0.0015 at 100 kHz 0.001
temperatures from sub-zero to 450 F. Cures to a tack-free
surface in 20 minutes. Full cure, 24 hours. Ideal for many 3 FL. OZ TUBE W/ DISPENSING NOZZLE
sealing, bonding and insulating applications, including gener- PART NO. 10-150
al electrical insulation, potting exposed electronic compo-
Cleaning Cards
Pre-saturated cleaning card designed to remove con- Pre-saturated Citracard cleaning card designed to
tamination from belts, rollers, and photo/optic sensors remove contamination from belts, rollers, and photo/optic
inside the bill validator. It is encoded and universally sensors inside the bill validator. It is encoded and univer-
accepted into all validators. sally accepted into all validators, and does not contain
alcohol to dry out the belts and rollers.
50/PACK, PART NO. LUCKYSTRIPE
50/PACK, PART NO. CDBPGBCC
General Purpose
CITRI-SOLVE DEGREASER BROMOCLEAN DEGREASER
Citri-Solve is a zero ozone depletion solvent for cleaning BromoClean is a strong, effective cleaner/degreaser
and degreasing. It contains industrial strength propor- that quickly removes and dissolves grease, oil, dirt, wax,
tions of natural citrus terpenes, which are safer than adhesives and most types of organic fluxes. It cleans thor-
traditional chlorinated solvents. This product is a natural oughly, dries rapidly with no residue, and is safe for metals
solvent cleaner, degreaser and deodorant. The foaming and most hard plastics. Check specific plastic compatibility
action quickly removes encrusted dirt, grease, oxides prior to use.
and other soils, including adhesives.
Applications - Used on contacts, controls, electric motors,
Applications - Use on metal, porcelain, formica, enamel, gears, industrial machinery, printed circuit boards and
hard plastic, engines, exhaust fans and ducts, gears, assemblies, switches and more.
gear drives, industrial machinery, mechanical devices,
metalstampings and framework, meters, hydraulic equip- 12 OZ. AEROSOL, PART NO. 51290
ment, stainless steel, work benches, grills/hoods, printing
presses, tools, counters, cabinets and more.
This extremely pure alcohol is frequently the recom- Designed for easy one-handed delivery of isopropyl
mended cleaner by manufacturers of tape heads, disc alcohol, eliminating direct hand contact, spillage, and
drives, etc. Does an excellent job of dissolving and waste while protecting product quality.The locking top
removing oxides from recording heads, also an excellent makes this product great for the technician s tool box.
degreaser. Leaves no residue. This is not an aerosol,
but an aerosol-style can with a screw on top. Suggested 4 FL. OZ., PART NO. 19-770
for use with swabs, clean cloth, or by immersion or trig-
ger sprayer.
Pure 99.9% anhydrous isopropyl alcohol is packaged in This solvent is a strong and effective cleaner and
aerosol form. This water-free product is a highly efficient degreaser. It quickly dissolves and removes all types of
and economical all-purpose cleaner for a wide range of soils including grease, oil, dirt, wax, adhesives and most
technical applications and sensitive surfaces. other types of organic materials. Safety Solvent cleans
thoroughly and dries rapidly, leaving no residue. Safe for
Applications - Excellent for the removal of oxidation metal and most hard plastics, but is not recommended
buildup and contaminating particles from read-write for styrene-based plastics, acrylics or polycarbonates.
heads, spot flux removal, and cleaning white minerals Check specific plastic compatibility prior to use.
residues. Safe on all surfaces and will not harm plastics.
Exceptionally pure with no risk of contamination. Non- Applications - Used on contacts, controls, electric
residual with no rinsing or wiping required. motors, gears, industrial machinery, printed circuit
boards and assemblies, switches and more.
12 OZ. AEROSOL, PART NO. 51215
12 OZ. LIQUID, PART NO. 51212L 21 OZ. AEROSOL, PART NO. 6310
Special Purpose
Electro-Clean is a CFC-free industrial strength cleaner CFC-free industrial strength cleaner and lubricant.
and degreaser ideal for use on electrical and electronic Cleans and restores corroded contacts, improving turn-
equipment. Powerful washing action and low surface er performance and reliability. Strong solvent action
tension work to quickly penetrate areas difficulttodis- effectively removes grease, dirt, dust, nicotine and
solve and remove encrusted dirt, grease, oils, magnetic metallic oxide deposits.
oxides, silicone, adhesives and other contaminants
(including fluxes). Safe to use on most plastics and Applications - Used on all metal contacts, bearings,
rubber. coins, chutes, metalstamping, miniature controls,
audio/video, heads, discs, potentiometers, relay con-
16 OZ. AEROSOL, PART NO. 51689 tacts, rheostats, switches, solenoids, tv turners, vacu-
24 OZ. AEROSOL, PART NO. 52489 um tube parts, volume and tone controls and much
more.
Ox Off is a superior formulation for removing of oxida- VCR/Magnetic head cleaner removes dust, dirt and
tion from electronic components. It cleans, lubricates, oxide from record and playback heads on VCR s, cas-
and protects metal contacts for improved performance sette decks and computer drives. Evaporates quickly
and leaves a clear microscopic protective coating that and leaves no residue. Environmental data: CFC 0%,
resists and prevents damaging oxidation.This product HCFC 0%, Cl. Solve. 0%, ODP 0.0, VOC 100%.
is safe to use on plastic and elastomer materials.
2 FL. OZ. NON-AEROSOL, PART NO. 19-5302
Applications - Used on contacts, controls, electric 4 OZ. AEROSOL, PART NO. 19-5304
motors, industrial machinery, electronic assemblies, TRAVEL DISPENSER, 4 FL. OZ., PART NO. 19-773
battery connections, thermostat controls, DP equip- 1 GAL., PART NO. 19-5302-000G
ment, radios and alternators, and more.
TO
Safe for all metals and painted or varnished surfaces.
COATINGS
systems, contacts, DP equipment, generators,
hydraulic systems, magnetic discs, medical equipment,
motors, optics, photographic equipment, relays,
rheostats, tape recorders, timers, tuning capacitors,
vending machines.
Conductive Paint
A quick drying lacquer-based coating, pigmented with For PC repair or add-on circuit traces. Pure silver in
powdered nickel. For repair and modification of printed lacquer based carrier may be brushed on for either
circuits. Conductivity is 5 to 6 ohms per square. conductors or shielding. Connections have equal or
better conductivity than copper (0.1 ohms per square).
2 FL. OZ. BOTTLE, PART NO. 22-0207-0000
1- T R O Y OZ. BOTTLE, PART NO. 22-0202-0000
See Locations and Contacts on Page 1 CHEMICAL • CLEANERS & DEGREASERS TO COATINGS 9
Chemicals
CHEMICAL • COATINGS
Protective Coatings
ACRYLIC PLASTIC, TRANSPARENT LACQUER EMI-RFI SHIELD, CONDUCTIVE COATING
Transparent (glass-like) lacquer. Seals, protects, insulates Effective method for protecting circuitry from external
and tarnish-proofs any object to which it is applied. This interference or for keeping low level signals inside circuit
coating has high dielectric strength and resists moisture, housing. Conductive graphite coating in a tough binder
caustic solutions and alcohols. Used to coat electronic requiring no undercoat. Adheres well to most plastics and
component and connections as well as metalorart glass. May be applied in more than one coat for severe
objects (to protect against tarnish and corrosion). problems. Sheet resistance of properly applied shield is
approx. 7.5 ohms/square @ 1 mil. Point-to-point 10 ohms
11 OZ. AEROSOL, PART NO. 10-8665 @ 1 inch spacing @ 1 mil. Maximum service temperature
180 F. Shielding ability generally ranges from 30-50 dB at
2 mils in conventionally-used RF devices. Full RF spec-
trum tests have not been conducted and may vary in your
application. Approx. 12 sq. ft. coverage.
This lacquer has excellent dielectric, arc and corona resist- Heavy-bodied, black insulating coating which replaces
ing properties, and protects surfaces against moisture. insulating tape in applications where wrap-around tape
Achieved with a quick drying, black lacquer insulating coat- could not readily be applied. This compound dries quick-
ing, based on a cellulose resin. This lacquer is used to coat ly to a strong pliable finish that will not crack, peel or
flybacks, coils, and transformers, and to improve the insu- chip. It is water and oil proof and may be used outdoors
lation and weather resistant properties of wires. to insulate any electrical terminal, connection or wire
Temperature range: to 325 F (163 C). Dielectric strength: splice. Excellent for providing insulation on handles, etc.
3,800 volts/mil min. Voltage rating 700 volts/mil min.
2 FL. OZ. BOTTLE W/ BRUSH, PART NO. 10-4702-0000 2 FL. OZ. BOTTLE W/ BRUSH, PART NO. 10-1762
16 FL. OZ. BOTTLE, PART NO. 10-1766-0000
The ultimate coating for PC boards provides a protective Alkaloid-based compound, especially resistant to
shield to resist environmental contaminants. Prevents environmental extremes including oils, water and most
arcing and shorting. Air drys in 15 to 30 minutes. May be acids and alkalis. Retainsits high dielectric strength
baked at 200 C for 30-60 minutes for extremely high tem- even if wet. Especially adaptable to the insulation of
perature applications. electrical and electronic devices or components which
may be operated in a very humid climate and up to
2 FL. OZ. BOTTLE, PART NO. 22-203 250 F (121 C). For general insulation of coils, trans-
formers, motor windings and for all-around protection
against oxidation and atmospheric attacks.
Contact Cleaners
BIG BATH CLEANER & DEGREASER COMPONENT BATH CLEANER & DEGREASER
Big Bath is an excellent cleaner and degreaser. This A non-flammable and quick evaporating general use
non-flammable and fast evaporating universal solvent cleaner/degreaser for removing dirt, oil, grease, and
removes dirt, oil, grease, and fluxes from electronic and fluxes from electronic and electrical contacts in switches,
electrical equipment. This non-residue cleaner/degreas- motors, PC boards, etc. Non- residual and formulated to
eriseffective on switches, motors, PC boards and other dissolve contaminants.
components. Big Bath cleans both polar and non-polar
contaminants from metals and other surfaces. Big Bath 16 OZ. AEROSOL, PART NO. 19-901
can be used to dissipate moisture in electronic and elec- 22 OZ. AEROSOL, PART NO. 19-624
trical devices. Formulated with HCFC’s and contains
no CFC’s.
8 OZ. AEROSOL, PART NO. 19-2903-0008 16 OZ. AEROSOL, PART NO. 51667
CFC-Free Contact Clean Plus is a chemically pure sol- GC Bath is formulated with hydrocarbons/alcohol as a
vent formulated for cleaning, lubricating and protecting heavy duty cleaner/degreaser. Exceptional perform-
all types of electronic contacts, switches and controls. ance can be expected where heavy buildups of
Excellent wetting action and high pressure spray easily grease, oil, dirt, grime, adhesive, and other unwanted
remove grease, dirt and oxidation. Deposits a light, long substances are encountered. This strong action prod-
lasting lubricant which maintains smooth movement of uct can be sprayed on the surface to break down,
controls and switches and protects contacts from corro- wash away, and clean grease from equipment, floors,
sive buildup and oxidation. work areas, engines, metalparts, and any area need-
ing cleaning. GC Bath has been found to be effective
16 OZ. AEROSOL, PART NO. 51668 to remove adhesives. Test for compatibility with sensi-
tive plastics. GC Bath is formulated with no chlorinat-
ed solvents and thus has no ozone depleting chemi-
cals. No CFC's. No HCFC's.
Hydrocarbon (petroleum) based cleaner/lubricant. Powerful, general purpose contact cleaner consisting
Provides long lasting lubricating and oxidation protec- of a combination of solvents, scientifically blended to
tion for electrical controls and contacts. dissolve and remove practically any type of deposit
that accumulates. It is non-flammable. Cleans, lubri-
Applications - Used on switches, contacts, potentiome- cates and retards future corrosion. Will craze or melt
ters, tools, mechanical and electrical components. Not some plastics, especially polystyrene. Contains
for use on energized equipment. Safe for most plastics. dichlorofluoroethane.
Check for compatibility.
6 OZ. AEROSOL, PART NO. 19-8666-0000
4 OZ. AEROSOL, PART NO. 19-0723-0000 16 OZ. AEROSOL, PART NO. 19-8666-0016
FREEZE MIST, REFRIGERANT SPRAY Smart Duster general purpose duster uses the latest in
HFC technology to deliver powerful blasts of dry,
Freeze Mist is a refrigerant spray used to locate ther- microscopically clean, inert gas while offering zero
mal intermittents in electronic components such as
capacitors, resistors and semiconductors. Great for for quick and safe removal of airborne contaminants
removing chewing gum from fabrics, freezing adhe- from sensitive surfaces, delicate components, and pre-
sives for easy removal, protecting heat sensitive com- cision equipment. It is completely non-residual, non-
ponents during soldering or for thermal fitting of metal abrasive and moisture free.
parts. The flow control trigger enables the user to apply Applications - Used on and around computers, office
the product with pinpoint accuracy and reduce product equipment, fax machines, home electronics, and pho-
usage. Freeze Mist contains no ozone depleting chem- tography equipment.
icals. The antistatic formulation minimizes the risk of
electrostatic damage to sensitive components. 10 OZ. AEROSOL, PART NO. 51024
Non-flammable and fast evaporating. Extra Strength Formulated to effectively remove ionic salts, organic
Flux Solve is excellent for the removal of ionic and non residues, RA & RMA fluxes and contaminants including
ionic fluxes from electronic components, PC boards or oil, grease, wax, tar, gum and resin. Quick cleaning
other surfaces requiring an extra strength flux remover. action is excellent for spot flux removal.
Contains perchloroethylene.
Applications - Safe for most hard plastics and gentle
Applications - Used on PC boards, electronic and on painted surfaces. Will not attack circuit board epoxy
electrical components. surfaces. In most applications this formula is as effec-
tive as flux removers containing TMC solvent while
16 OZ. AEROSOL, PART NO. 19-270 eliminating the potential to deplete the ozone layer.
Removes all types of organic flux. Pinpoint applicator This mild flux cleaner is effective in removing all types
supplied. Non ODC. Contains: trichloroethylene, car- of rosin and synthetic fluxes, ionic soils, silicone,
bon dioxide and isopropyl alcohol. adhesives and particle matter. Contains an HCFC
blend with stabilizer which making the solvent non-
16 FL. OZ. CAN, PART NO. 19-0229-0000 reactive (NR) with metals such as aluminum and zinc.
16 OZ. AEROSOL, PART NO. 22-271 Safe for most plastics but not recommended for use
on acrylic, polystyrene and polycarbonate materials.
Designed as a CFC-free alternative to TMS solvent.
Flux Clean NR can be used on all types of rosin and
synthetic fluxes.
GC Flux Solve for de-energized equipment has a A powerful flux remover that will dissolve and flush
hydrocarbon/alcohol base. It is excellent for the away all known fluxes immediately. May cause loss of
removal of ionic and non-ionic fluxes from electronic nomenclature from capacitors or like products. Can dis-
components, PC boards or other surfaces requiring an color some plastics. Will not harm circuit performance.
extra strength flux remover. GC Flux Solve is formulat- Static-free formulation. Contains trichloroethylene, iso-
ed with no chlorinated solvents and thus has no ozone propanol and carbon dioxide.
depleting chemicals. No CFC's or HCFC's. Fast evap-
oration. 12 OZ. AEROSOL, PART NO. 19-7518-0000
18 OZ. AEROSOL, PART NO. 19-7522-0000
1 GAL., PART NO. 19-0825-000G
10 OZ. AEROSOL, PART NO. 19-825
Higher thermal conductivity formula has all the same Compounded with 100% synthetic base stocks.
benefits of conventional heat sink greases, plus is Features excellent heat transfer efficiency, thermal sta-
exceptionally stable in high humidity applications. bility, high flow rate, no separation, bleed or migration
Available in silicone and non-silicone versions. typical of silicone based greases.
1 OZ. SYRINGE, PART NO. 10-8130-0000 1 LB. JAR, PART NO. 10-8126-0000
1 LB. JAR, PART NO. 10-8135-0001 1/2 FL. OZ. TUBE, PART NO. 10-8118-0000
SILICONE, 1 OZ. SYRINGE, PART NO. 10-8135-0000 2.5 FL. OZ. TUBE, PART NO. 10-8120-0000
SILICONE (Z9), HEAT SINK GREASE WATER SOLUBLE, HEAT SINK COMPOUND
Industry standard zinc oxide filled silicone heat sink Easy clean-up, non-migrating. Eliminates use of sol-
grease for most applications. Willnotsoften at elevated vents, is non-reactive, exhibits excellent dielectric proper-
temperatures, dry out, or harden. ties.
1 FL. OZ. TUBE, PART NO. 10-8109 1 OZ. SYRINGE, PART NO. 10-8132-0000
1 LB. CAN, PART NO. 10-8106-0000
6.5 GRAM TUBE, PART NO. 10-8108
Janitorial Cleaners
For glass, plastics, and finished surfaces. Easy to apply Glass & Plastic Cleaner wipes dirt, dust and grime from
and very effective in removing smudges, dirt, oily films all glass and plastic surfaces without leaving streaks or
and other deposits with a minimum amount of rubbing. dulling residue. Contains grease-cutting ammonia.
Active ingredients are silicone-glycol polymers which Convenient aerosol packaging. Economical for home or
provide a high luster and minimize or eliminate dust industry.
attracting static. Harmless to practically any surface,
will not scratch, discolor or streak. 14 OZ. AEROSOL, PART NO. 10-9082-0000
Glass Cleaners
A non-flammable spot and stain remover that sprays as A safe, effective way to remove gum, putty, candle wax
a liquid and drys to a powder. Easily brushes away and and other gummy substances. Freezing action occurs
removes stains without leaving a ring. Removes oil more quickly than conventional refrigerants.
based stains and spots caused by lipstick, gravy, grime,
food, oil, grease and perspiration. Applications - Used on carpeting, wood panels, floors,
chairs, desks and and all types of fabrics.
Applications - Used on clothing, curtains, draperies,
upholstered furniture, carpets, slipcovers, wallpaper 5 OZ. AEROSOL, PART NO. 6130
and car interiors. It is safe on all dry cleanable fabrics.
Specially designed for outdoor applications and formu- A CFC-free formula strong enough to remove labels
lated to be strong enough to remove marks of graffiti and adhesive residues without the need for extensive
without harming original surfaces. scrubbing, but mild enough to be used on all types of
surfaces. Convenient aerosol application is ideal for
Applications - Used on brick, concrete, cinder block, removal of pressure sensitive labels and adhesive rem-
mortar and other exterior masonry surfaces. May also be nants from computer tapes, diskette cases, terminals,
used on hard tile, porcelain, baked enamel, brass, alu- keyboards, file cabinets, telephones--anywhere these
minum and more. labels may be applied.
15.5 OZ. AEROSOL, PART NO. 6041 4 OZ. AEROSOL, PART NO. 5416
Special Purpose
An industrial strength cleaner for removing wax build- Cleans and dusts furniture in one step with no waxy
up, stubborn soils and scuff marks from floors and buildup, leaving a clean and glossy protective finish.
baseboards. Large can with an easy-use inverted Removes fingerprints and smudges adding new life to
spout. Make floors and baseboards shine like new. both dark and light wood furniture. This water-based
formula is silicone enhanced and contains lemon and
Applications - Used on baseboards and floors. other fine oils imparting a fine polished look without
tedious wiping and rubbing.
18.5 OZ. AEROSOL, PART NO. 6170
Applications - Used on wood, plastic, leather, vinyl,
brass, chrome, and porcelain.
Industrial strength cleaner that removes tough stains Emulsion-based USDA authorized stainless steel clean-
from carpeting and upholstery.Aerosol application elim- er is designed for use in food processing and service
inates waste and excessive use. Reaches deep into the areas. This professional strength product brightens and
stained area to dissolve grease, oil and many other polishes stainless steel and removes spots created by
stubborn stains. water and oil. The gloss is renewed with little wiping and
will be retained with no powdery residue.
Applications - Used on carpets, runners, rugs, mats,
upholstery, curtains, clothing and much more. Applications - Used on stainless steel, chrome, brass,
copper, and aluminum.
18 OZ. AEROSOL, PART NO. 6110
18 OZ. AEROSOL, PART NO. 6060
Lubricants
DRY TFE, DRY FILM TEFLON LUBRICANT FOUR IN ONE, INDUSTRIAL LUBRICANT
GC Dry TFE is an all purpose dry film lubricant and This unique formula, with its multitude of applications,
release agent that contains minute Teflon particles to can save time, labor and money. Itprotects and pre-
lubricate where a dry lubricant is needed. Excellent as a serves valuable equipment. Helps prevent mechanical
mold release and for potting compounds. Temperatures and electrical failures and ease the mechanic s job.
range from -300” F to +500” F. (Teflon is a registered Displaces water on ignition systems, preventing shorts
trademark of Dupont.) and helps start wet engines. Prevents rust and corro-
sion with a non-oily protective film that will not pick up
4 OZ. AEROSOL, PART NO. 19-810 dust. Penetrates frozen parts, freeing them up
immediately. Lubricates, eliminating squeaks and
reducing wear.
CHEMICAL • LUBRICANTS
Lubricants Con’t
LUBEREX, GENERAL USE LUBRICANT
POCKET OILER, CLEAR DISPENSER
W/ POCKET CLIP
Superior, calcium stearate based grease compound for
general use in industry, the shop or at home. Provides
High grade electronic oil in a leakproof see-through
excellent lubrication for bearings, appliances, hand
plastic barrel container with pocket clip attached.
tools, bicycles and other sporting equipment including
Accurately dispenses one drop at a time. For use on
fishing reels and guns; also for business machines,
electronic and electrical devices, clocks, office
instruments and automotive lubrication. Excellent
machines and sporting goods. Not refillable.
dielectric properties.
Multi-purpose, concentrated silicone lubricant recom- Applications - Used on hinges, latches, fan belts, car
mended for all potential areas of friction. Excellent for doors, locks and rubber moldings. Use to lubricate
preventing sticking or squeaking in rolling or sliding drawers, doors, windows locks, screens etc. Spray on
operations. Leaves a clear film which protects against lawn mowers, garden equipment, and snow blowers
moisture and corrosion. Excellent for restoring and to prevent grease, dirt and snow from sticking. Use
prolonging the life of rubber and vinyl parts. to protect and waterproof ignition systems, plugs,
distributors, etc.
Applications - Used on communication systems, controls,
counters, delicate mechanisms, distributors, DP equip- 12.5 OZ. AEROSOL, PART NO. 6340
ment, drive belts, fan belts, gauges, hinges, latches,
plugs, potentiometers, relays, rheostats, rubber molding,
solenoids, switches, tight seal controls, timing devices, SILI-SPRAY, SILICONE LUBRICANT
valves and much more.
Quality silicone lubricant. Handy aerosol features
12.5 OZ. AEROSOL, PART NO. 51259 adjustable 3-way valve. Dispenses lubricating film
either light, medium, or heavy according to need.
Leaves no residue buildup. Ideal for home, office, work-
shop, hinges, slides, and other moving parts on auto-
mobiles, boats, appliances, toys and drawers (wooden
types). May be painted over.
Lubricants Con’t
Silicone Mold Release, when applied to molds, increas- Highly refined natural petroleum oil for general purpose
es production in all molding operations. Allows easier lubrication on motors, small gears, sliding mechanisms
parting of molded parts.A special spray valve points the and others. Rust and oxidation inhibitor. Includes a wet-
can in the correct position to avoid waste and releases ting agent for better penetration. A special feature is the
a soft, even spray pattern covering more plastic container with a telescoping spout which pulls
surface area. Higher silicone content allows more out to 7 .
cycles per application, saving you time and expense.
4 FL. OZ. BOTTLE, PART NO. 10-9410-0000
Applications - Used with injection and compression
molding, vacuum forming, transfer molding, lost wax
and investment casting and many other lubricant
applications.
Special lubricant for high frequency contact applications White lithium soap-based grease lubricant that provides
such as television tuners. Purified without traces of met- superior lubrication and reduces friction and wear to a
als or metal oxides. Gives lasting protection against oxi- minimum. Suitable for use on wiping contacts.Itretains
dation and corrosion. Especially important for use on consistency over a wide range of temperatures, will not
equipment operated in corrosive atmospheres such as oxidize or harden and provides outstanding protection
seashores or in industrial areas. against corrosion.
1 3/4 FL. OZ. TUBE, PART NO. 10-2610-0000 1 3/4 FL. OZ. TUBE, PART NO. 19-2302-0000
A flux for all metals, as effective as acid or chloride A strong flux for soldering sheet metalparts, bus wires
types but non-corrosive. Solders even hard-to-solder to steel chassis, tinning and cleaning of soldering iron
metals such as aluminum, zinc-based alloys, steel, etc. tips, etc. Not recommended for electronic or printed
Ideal for soldering bus and ground wires to aluminum circuit soldering.
and steel chassis, to hermetically seal lids to metal
cases, for pot-tinning of copper and brass parts,etc. 2 FL. OZ. BOTTLE, PART NO. 10-1207
Not recommended for electronic wiring, including print-
ed circuits.
Lubricates, cleans, fluxes and rinses away. Completely non-corrosive liquid solder flux consisting
of a solution of special rosin in alcohol. Contains no
2 FL. OZ. BOTTLE, PART NO. 10-202 trace of acids or chlorides and is completely safe to
use even on the most delicate electronic equipment.
Specialty Chemicals
ANTI-SEIZE COMPOUND COLD GALVANIZING COMPOUND, GRAY
Specifically engineered to resist seizing and corrosion Cold Galvanizing Compound stops rust and corrosion
on any threaded surface up to 2100 F.This is an excel- by forming a galvanic coating that adheres to iron and
lent product for eliminating seizing of soldering iron tips, steel. 95% pure zinc fluid compound that is applied by
especially threaded types. Will prevent seizing, cold- spraying. Dries to a gray matte finish that will not crack
welding, and fretting corrosion of all metal threads; a or peel. Applications include machinery, equipment,
preliminary degreasing with trichloroethane or similar outdoor towers, or any items exposed to the elements
solvent is suggested for maximum benefit. Apply by dip- of weather.
ping, brush, etc.
14.5 OZ. AEROSOL, PART NO. EL-0100-0000
1 FL. OZ. TUBE, PART NO. 10-1230-0000
See Locations and Contacts on Page 1 CHEMICAL • SOLDERING & SPECIALTY CHEMICALS 23
Chemicals
CHEMICALS • SPECIALTY CHEMICAL & THINNERS & SOLVENTS
Soft, inert silicone grease with excellent dielectric proper- Neutralizes and prevents static electricity in a wide
ties. Usable over a wide range of temperatures. Its consis- variety of applications. May be used on circuit boards, car-
tency is vaseline-like and it is white opaque in color.Itpro- peting, clothing, cabinetry or generators of static electrici-
vides an excellent dielectric coating which excludes mois- ty. One application lasts for weeks. An excellent mainte-
ture and prevents high voltage arcing. Applicable to com- nance area product for use on test equipment, circuits
ponents in the high voltage section of TV receivers. being serviced and work surfaces.
Protects ignition systems in automobiles and boats,in
addition to providing an outstanding corrosion resistant 8 OZ. AEROSOL, PART NO. 19-1004-0000
coating on exposed metal surfaces, such as TV antenna
terminals as well as general rustproofing. This compound
also makes an excellent lubricant for rubber or plastic.
All purpose mineral spirit type thinner and solvent for A solvent to remove silicone and other types of protective
paint and varnish base products. coatings from PC boards. Required when modifying PC
boards or replacing components where the protective coat-
2 FL. OZ. BOTTLE, PART NO. 10-6702-0000 ing interferes with the desoldering and resoldering opera-
tion.
For thinning polystyrene base coil dopes and cements. Fast-acting solvent formulated for use in speaker repair.
Can also be used for cementing polystyrene parts. Dissolves cement on speaker cones, spiders, frames, and
voice-coils. May also be used as a thinner for all lacquer
2 FL. OZ. BOTTLE, PART NO. 10-4102-0000 type cements.
Coin Mechanisms
COIN MECHANISMS
7
NO
16
18
66 0043
16 7
66 6002
66 04
00
01
M
13 VOLT OPTION
0
16
16
16
ITE
1
66
66
04660027-05 ANTICHEAT
8
04660169-05 STANDARD
06250001 60 OHM, GREEN WIRE
13 06250002 200 OHM, GRAY WIRE
06250063 2.6 GRAM WEIGHT
14
06250112 6.0 GRAM WEIGHT
09270118 12VDC
16 09270144 24VDC
09270145 12VDC INHIBIT
MATERIAL COLUMN
ITEM PART NO. QTY DESCRIPTION ITEM PART NO. QTY DESCRIPTION
1 04050031 1 SPRING, EXTENSION, 1-1/16, COIL LOCKING 13 0625XXXX 1 COIL & BRKT, ASSY
2 04050027 1 SPRING, COMPRESSION, COIL RETAINER 14 0625XXXX 1 COIL , ASSY, SENSOR
3 04060005-01 4 STUD, #6, MTG 14A 06660012 DAMPER WEIGHT, ASSY, 2.6G
4 04060036 1 INS, NUT, #4-40 14B 06660013 DAMPER WEIGHT, ASSY, 6.0G
5 04060052-01 1 BUSHING, SPRING RETAINING 15 06660038 1 RAIL, ASSY, SM RAIL, STD INSERT
6 04660002 1 STOP, SENSING COIL SAFETY 16 0927XXXX 1 PCB, CTRL
7 04660021 1 SPACER, COIN EXIT, .155 17 436-4 1 NUT, 4-40, HEX, KEPS
8 0466XXXX 1 MAINPLATE, 18 P-104-4-3 1 SCREW, 4-40 X 3/16, PHIL, PH, MS
9 04660030 1 SHIELD, SENSOR COIL RETAINING 19 P-186-4-3 2 SCREW, 4-40 X 3/16, PHIL/SQ, SEMS WASH
10 04660062-01 1 BRKT, COIL LOCKING 20 P-221-4-12 1 SCREW, 4 X 3/4, PHIL, TYPE45, PLASTITE
11 04660165 1 COVER, PCB HSG, UNIVERSAL 21 P-221-4-3 1 SCREW, 4 X 3/16, PHIL, TYPE45, PLASTITE
12 04660166 1 HSG, PCB, UNIVERSAL
CC-16 CC-16WB
P/N 66160132
PARTS IDNETIFICATION
CC-33 CC-33
PARTS IDENTIFICATION
CC-37 CC-37
PARTS IDENTIFICATION
MC MC
PARTS IDENTIFICATION
Electrical
ELECTRICAL
Batteries
Alkaline performs reasonably well in most temperature environments, has a relatively long
shelf life, and can be stored at varying temperature with little negative effect. In addition, its
low cost, useable nominal voltage, and wide size selection make it an attractive design option
for non-rechargeable industrial and commercial applications.
TO
Rechargable Batteries
AA
Battery Charger
Ballasts
PART NO. DESCRIPTION
19507690
ELECTRICAL • BULBS
Flourescents
PART NO. DESCRIPTIONS PART NO. DESCRIPTIONS
F4T5CW Flourescent Lamp, 4W, 6”L, 100/Box F13T8CW Flourescent Lamp, 6W, 9”L, 100/Box
F6T5CW Flourescent Lamp, 6W, 9”L, 100/Box F14T8CW Flourescent Lamp, 8W, 12”L, 100/Box
F8T5CW Flourescent Lamp, 8W, 12”L, 100/Box F18T8 Flourescent Lamp, 15W, 18”L, 25/Box
F15T8-EIKO Flourescent Lamp, 15W, 18”L, 25/Box FC6T9 (D) Circline Lamp, 22W, 6.5”L, 12/Box
F10T8CW Flourescent Lamp, 10W, 8”L, 25/Box FC8T9 (D) Circline Lamp, Circle, 22W, 8.25”L, 12/Box
F13.5T8CW Flourescent Lamp, 13.5W, 8”, 25/Box FC12T9 (D) Circline Lamp, Circle, 32W, 12”L, 12/Box
Also available in (D) Daylight Version
Minibulbs
Bases
PART NO. VOLTS AMPS SIZE BASE PART NO. VOLTS AMPS SIZE BASE
37 14 0.9 T-1 3/4 Wedge 464 28.0 0.17 T-3 1/4 Wedge
43 2.5 0.5 T-3 1/4 Bayonet 515 5.0 0.115 T-1 1/4 Wire Terminal
44 6.3 0.25 T-3 1/4 Bayonet 555 6.3 0.25 T-3 1/4 Wedge
47 6.3 0.15 T-3 1/4 Bayonet 585 28.0 0.04 T-3 1/4 Wedge
55 7.0 0.41 G-4 1/2 Bayonet 656 28.0 0.06 T-3 1/4 Wedge
57 14.0 0.24 G-4 1/2 Bayonet 657 28.0 0.08 T-3 1/4 Wedge
63 7.0 0.63 G-6 Bayonet 658 14.0 0.08 T-3 1/4 Wedge
68 13.5 0.59 G-6 Bayonet 680 5.0 0.06 T-1 Wire Terminal
73 14.0 0.08 T-1 3/4 Wedge 715 5.0 0.115 T-2 Wire Terminal
E73 14.0 0.08 T-1 3/4 Wedge(European) 755 6.3 0.15 T-3 1/4 Bayonet
74 14.0 0.1 T-1 3/4 Wedge 756 14.0 0.08 T-3 1/4 Bayonet
81 6.5 1.02 G-6 Bayonet 757 28.0 0.08 T-3 1/4 Bayonet
85 28.0 0.04 T-1 3/4 Wedge 906 13.0 0.69 T-5 Wedge
86 6.3 0.2 T-1 3/4 Wedge 912 12.8 1 T-5 Wedge
E86 6.3 0.2 T-1 3/4 Wedge(European) 1815 14.0 0.2 T-3 1/4 Bayonet
87 6.8 1.91 S-8 Bayonet 1818 24.0 0.17 T-3 1/4 Bayonet
89 13.0 0.58 G-6 Bayonet 1819 28.0 0.04 T-3 1/4 Bayonet
124 14.0 0.27 T-1 3/4 Wedge 1820 28.0 0.1 T-3 1/4 Bayonet
147 7.0 0.43 T-1 3/4 Wedge 1847 6.3 0.15 T-3 1/4 Bayonet
158 14.0 0.24 T-3 1/4 Wedge 1873 28.0 0.2 T-3 1/4 Bayonet
159 6.3 0.15 T-1 3/4 Wedge 1888 7.0 0.5 T-3 1/4 Bayonet
161 14.0 0.19 T-1 3/4 Wedge 1892 14.4 0.12 T-3 1/4 Bayonet
168 14.0 0.35 T-1 3/4 Wedge 1893 14.0 0.33 T-3 1/4 Bayonet
192 13.0 0.33 T-1 3/4 Wedge 1895 14.0 0.27 G-4 1/2 Bayonet
194 14.0 0.27 T-1 3/4 Wedge 2185 28.0 0.04 T-1 3/4 Wire Terminal
222 2.3 0.25 TL-3 Screw 2187 28.0 0.04 T-1 3/4 Wire Terminal
259 6.3 0.25 T-1 3/4 Wedge 6832 5.0 0.06 T-1 Wire Terminal
268 2.5 0.35 T-1 3/4 Flanged 6838 28.0 0.025 T-1 Wire Terminal
313 28.0 0.17 T-1 3/4 Bayonet 7328 6.0 0.2 T-1 3/4 Bi-Pin
388 28.0 0.04 T-1 3/4 Grooved 7381 6.3 0.2 T-1 3/4 Bi-Pin
394 12.0 0.04 T-1 3/4 Flanged 7387 28.0 0.04 T-1 3/4 Bi-Pin
455 6.5 0.5 G-4 1/2 Bayonet
LTWP1W201C012DC LTWP1W201C006A
Specialty Bulbs
Cable Ties
PART NO. DESCRIPTION UNITS Also Available in:
Natural
BA20C 3/4 Tie Mount 100 White
Black
BA30C 1” Tie Mount 100
Red
N4-18M 4" White 1000 Green
N5-18-9M 5-6", Natural 1000 Blue
N6-18M-A 6" Cable Ties-18# 1000 Yellow
N8-40M 8" Cable Ties-40# 1000 Orange
Cable Ties
N8-75M 8"Cable Ties -75# 1000
Clips
PART NO. DESCRIPTION
ELECTRICAL • CAPACITORS
NEV Capacitors
Radial 85°
NEV Capacitors
Radial 85°
ELECTRICAL • CAPACITORS
NEH Capacitors
Axial 85°
ELECTRICAL • CAPACITORS
NEH Capacitors Con’t
Axial 85°
NEHH3.3M250CB
MLR Capacitors
Polyester Film - Mylar 85 °
PART NO. VOLTAGE CAPACITANCE PART NO. VOLTAGE CAPACITANCE
ELECTRICAL • CAPACITORS
MLR Capacitors Con’t
Polyester Film - Mylar 85 °
PART NO. VOLTAGE CAPACITANCE PART NO. VOLTAGE CAPACITANCE
MLR104K250 MLR122K630
.001 102 5.54 8.28 17.63 13.84+1.3 0.6 .047 473 7.50 12.50 18.00 15.00+1.5 0.6
.0012 122 5.87 8.62 17.63 13.84+1.3 0.6 .05 503 7.50 12.50 18.00 15.00+1.5 0.6
.0015 152 5.61 8.36 17.63 13.84+1.3 0.6 .056 563 8.50 14.50 18.00 15.00+1.5 0.6
.0018 182 5.95 8.69 17.63 13.84+1.3 0.6 .068 683 8.50 14.50 18.00 15.00+1.5 0.6
.0022 222 6.38 9.12 17.63 13.84+1.3 0.6 .082 823 9.00 15.50 18.00 15.00+1.5 0.8
.0025 252 7.12 9.61 17.63 13.84+1.3 0.8 .1 104 9.00 14.00 24.00 20.00+1.5 0.8
.0027 272 7.12 9.61 17.63 13.84+1.3 0.8 .12 124 10.00 17.00 24.00 20.00+1.5 0.8
.003 302 6.38 9.55 17.63 13.84+1.3 0.8 .15 154 10.00 17.00 24.00 20.00+1.5 0.8
.0033 332 6.38 9.55 17.63 13.84+1.3 0.8 .18 184 11.00 20.00 24.00 20.00+1.5 0.8
.0039 392 6.76 9.94 17.63 13.84+1.3 0.8 .22 224 11.00 20.00 24.00 20.00+1.5 0.8
.0047 472 7.20 10.39 17.63 13.84+1.3 0.8 .25 254 11.00 20.00 24.00 20.00+1.5 0.8
.005 502 7.68 10.85 17.63 13.84+1.3 0.8 .27 274 12.00 20.00 24.00 20.00+1.5 0.8
.0056 562 7.68 10.85 17.63 13.84+1.3 0.8 .33 334 11.00 20.00 24.00 27.50+1.5 0.8
.0068 682 7.95 11.79 17.63 13.84+1.3 0.8 .39 394 13.00 22.00 30.00 27.50+1.5 0.8
.0082 822 8.53 12.37 17.63 13.84+1.3 0.8 .47 474 13.00 22.00 30.00 27.50+1.5 0.8
.01 103 6.00 10.00 14.00 10.00+1.5 0.6 .5 504 13.00 22.00 30.00 27.50+1.5 0.8
.012 123 6.00 11.00 14.00 10.00+1.5 0.6 .56 564 14.00 23.00 31.00 27.50+1.5 0.8
.015 153 6.50 11.50 14.00 10.00+1.5 0.6 .68 684 15.00 26.00 31.00 27.50+1.5 0.8
.018 183 7.00 12.00 14.00 10.00+1.5 0.6 1.0 105 17.00 30.00 31.00 27.50+1.5 0.8
.022 223 7.00 12.50 14.00 10.00+1.5 0.6 1.5 155 20.00 30.00 37.00 31.00+1.5 0.8
.027 273 6.00 11.00 18.00 15.00+1.5 0.6 1.8 185 19.00 28.00 46.00 41.00+1.5 0.8
.033 333 7.00 12.00 18.00 15.00+1.5 0.6 2.0 205 20.50 30.00 46.00 41.00+1.5 0.8
.039 393 7.00 12.50 18.00 15.00+1.5 0.6 3.0 305 21.00 35.00 45.00 38.00+1.5 0.8
50 volt (35VAC) Series Dimensions (mm) .01 103 6.0 10.0 14.0 10+1.5 0.6
Cap Code T H L S d .015 153 6.0 10.0 14.0 10+1.5 0.6
.022 223 6.0 10.0 14.0 10+1.5 0.6
.001 102 3.0 7.5 5.5 3.5+1.0 0.5 .027 273 6.0 10.0 14.0 10+1.5 0.6
.033 332 3.0 7.5 5.5 3.5+1.0 0.5 .033 333 6.0 10.0 14.0 10+1.5 0.6
.01 103 3.0 7.5 6.0 3.5+1.0 0.5 .047 473 6.0 10.0 14.0 10+1.5 0.6
.012 123 3.0 9.0 6.0 3.5+1.0 0.5 .068 683 6.0 10.0 14.0 10+1.5 0.6
.018 183 3.5 9.0 6.5 3.5+1.0 0.5 .082 823 7.0 10.0 14.0 10+1.5 0.6
.027 273 4.0 9.5 6.5 3.5+1.0 0.5 .1 104 7.0 10.0 14.0 10+1.5 0.6
.033 333 4.0 9.5 6.5 3.5+1.0 0.5 .12 124 7.0 11.0 14.0 10+1.5 0.6
.039 393 4.5 9.5 7.5 5.0+1.5 0.5 .15 154 7.0 11.0 18.0 15+1.5 0.6
.047 473 4.5 9.5 7.5 5.0+1.5 0.5 .18 184 7.0 12.0 18.0 15+1.5 0.6
.1 104 5.5 10.5 9.0 5.0+1.5 0.5 .22 224 7.0 12.0 18.0 15+1.5 0.6
.15 154 6.0 10.0 14.0 10.0+1.5 0.6 .27 274 7.0 13.0 18.0 15+1.5 0.6
.27 274 6.0 11.0 14.0 10.0+1.5 0.6 .33 334 7.0 13.0 18.0 15+1.5 0.6
.33 334 6.0 12.0 14.0 10.0+1.5 0.6 .39 394 8.0 15.0 18.0 15+1.5 0.8
1.0 105 9.0 15.0 18.0 15.0+1.5 0.6 .47 474 8.0 15.0 24.0 20+1.5 0.8
.56 564 9.0 15.5 24.0 20+1.5 0.8
.68 684 9.0 15.5 24.0 20+1.5 0.8
.82 824 10.0 17.0 24.0 20+1.5 0.8
100 volt (65VAC) Series Dimensions (mm) 1.0 105 10.0 17.0 24.0 20+1.5 0.8
Cap Code T H L S d 1.2 125 10.0 19.5 24.0 20+1.5 0.8
1.5 155 10.0 19.5 31.0 27.5+1.5 0.8
.001 102 3.0 7.5 5.5 3.5+1.0 0.5 1.8 185 11.0 20.0 31.0 27.5+1.5 0.8
.0012 122 3.0 7.5 5.5 3.5+1.0 0.5 2.2 225 13.0 22.0 31.0 27.5+1.5 0.8
.0015 152 3.0 7.5 5.5 3.5+1.0 0.5 3.3 335 16.0 26.0 31.0 27.5+1.5 0.8
.0018 182 3.0 7.5 5.5 3.5+1.0 0.5 4.7 475 16.0 26.0 35.0 27.5+1.5 0.8
.002 202 3.0 7.5 5.5 3.5+1.0 0.5 5.6 565 16.0 26.0 35.0 27.5+1.5 0.8
.0022 222 3.0 7.5 5.5 3.5+1.0 0.5
.0027 272 3.0 7.5 5.5 3.5+1.0 0.5
.0033 332 3.0 7.5 5.5 3.5+1.0 0.5
.0039 392 3.0 7.5 5.5 3.5+1.0 0.5
.0047 472 3.0 7.5 5.5 3.5+1.0 0.5
.0056 562 3.0 7.5 5.5 3.5+1.0 0.5 400 volt (200VAC) Series Dimensions (mm)
.0068 682 3.0 7.5 5.5 3.5+1.0 0.5 Cap Code T H L S d
.0082 822 3.0 7.5 6.0 3.5+1.0 0.5
.01 103 3.0 7.5 6.0 3.5+1.0 0.5 .0047 472 6.0 10.0 14.0 10+1.5 0.6
.012 123 3.0 9.0 6.0 3.5+1.0 0.5 .01 103 6.0 10.0 14.0 10+1.5 0.6
.015 153 3.0 9.0 6.0 3.5+1.0 0.5 .015 153 6.0 10.0 14.0 10+1.5 0.6
.018 183 3.5 9.0 6.5 3.5+1.0 0.5 .022 223 6.0 10.0 14.0 10+1.5 0.6
.022 223 3.5 9.0 6.5 3.5+1.0 0.5 .033 333 6.0 10.0 14.0 10+1.5 0.6
.027 273 4.0 9.5 6.5 3.5+1.0 0.5 .047 473 8.0 11.0 14.0 10+1.5 0.6
.033 333 4.0 9.5 6.5 3.5+1.0 0.5 .056 563 8.0 13.0 14.0 10+1.5 0.6
.039 393 4.5 9.5 7.5 5.0+1.5 0.5 .068 683 6.0 13.0 18.0 15+1.5 0.6
.047 473 4.5 9.5 7.5 5.0+1.5 0.5 .082 823 6.0 13.0 18.0 15+1.5 0.6
.056 563 4.5 10.5 8.0 5.0+1.5 0.5 .1 104 6.0 13.0 18.0 15+1.5 0.6
.068 683 4.5 10.5 8.0 5.0+1.5 0.5 .12 124 7.0 14.0 18.0 15+1.5 0.6
.082 823 5.5 10.5 9.0 5.0+1.5 0.5 .15 154 7.0 14.0 18.0 15+1.5 0.6
.1 104 5.5 10.5 9.0 5.0+1.5 0.5 .18 184 8.0 16.0 18.0 15+1.5 0.8
.12 124 6.0 12.0 14.0 10.0+1.5 0.6 .22 224 8.0 16.0 24.0 20+1.5 0.8
.15 154 6.0 10.0 14.0 10.0+1.5 0.6 .27 274 9.0 16.0 24.0 20+1.5 0.8
.18 184 6.0 10.0 14.0 10.0+1.5 0.6 .33 334 9.0 16.0 24.0 20+1.5 0.8
.22 224 6.0 10.0 14.0 10.0+1.5 0.6 .39 394 10.0 18.0 24.0 20+1.5 0.8
.27 274 6.0 11.0 14.0 10.0+1.5 0.6 .47 474 10.0 18.0 24.0 20+1.5 0.8
.33 334 6.0 12.0 14.0 10.0+1.5 0.6 .56 564 10.5 18.0 30.0 27.5+1.5 0.8
.39 394 6.0 12.0 18.0 15.0+1.5 0.6 .68 684 10.5 18.0 30.0 27.5+1.5 0.8
.47 474 6.0 12.0 18.0 15.0+1.5 0.6 .82 824 12.0 22.0 30.0 27.5+1.5 0.8
.56 564 7.0 14.0 18.0 15.0+1.5 0.6 1.0 105 12.0 22.0 30.0 27.5+1.5 0.8
.68 684 7.0 14.0 18.0 15.0+1.5 0.6 1.5 155 15.0 24.5 30.0 26.5+1.5 0.8
.82 824 9.0 15.0 18.0 15.0+1.5 0.6 2.0 205 18.0 26.5 30.0 26.5+1.5 0.8
1.0 105 9.0 15.0 18.0 15.0+1.5 0.6 3.0 305 19.0 28.5 37.0 31+1.5 0.8
2.2 224 11.0 20.0 24.0 20.0+1.5 0.8 4.0 405 23.5 32.0 37.0 31+1.5 0.8
ELECTRICAL • CAPACITORS
VHT Capacitors
Radial 105°
VHT4.7MSO VHT33M160
MQD1I
SPA-7I SPA-10I
ELECTRICAL • DIODES
Diodes
1N4001 Axial, 1A, 50V 1N5244 1N5200 Series Zener Diode, 200 mA I
1N4002 Axial, 1A, 100V Forward, .1 uA at 10 V I Reverse,
1N4003 Axial, 1A, 200V Axial Leads, Zener Type, 1.1 V at 200
1N4004 Axial, 1A, 400V mA V Forward
1N4005 Axial, 1A, 600V 1N5248B Zener, 500mW, 18V Nom, DO204AH
1N4006 Axial, 1A, 800V 1N5254 Zener, 500mW, 27V Nom, DO204AH
1N4007 Axial, 1A, 1000V 1N5256 Zener, 30V, 5%, 500mW
1N4148 High Conductance, Fast, Pkg Style 1N5349B Zener, 5W, 12V Nom, Case 17
DO35 1N5400 Axial, 3A, 50V
TO
1N4730A Zener, 1W, 3.9V Nom, DO41 1N5401 Rectifier, 3A, 100V, Standard
1N4732A Zener, 1W, 4.7V Nom, DO41 Recovery, Axial Lead
FANS
1N4733A Zener, 1W, 5.1V Nom, DO41 1N5406 Rectifier, Fast Recovery, General
1N4735 Zener, 1W, 6.2V Nom, DO41 Purpose, 600V, 3A, Case 267-03
1N4737A Zener, 1W, 7.5V Nom, DO41 1N5626 3 A, 600 V, Silicon, Rectifier
1N4739A Zener, 1W, 9.1V Nom, DO41 Diode, DO-201AD
1N4740 Zener, 1W, 10V Nom, DO41 1N5817 Rectifier, Schottky, 20V, 1A, Case 59-
1N4742A Zener, 1W, 12V Nom, DO41 04
1N4743 Zener, 1W, 13V Nom, DO41 1N5818 Rectifier, Schottky, 30V, 1A, Case 59-
1N4744 Zener, 1W, 15V Nom, DO41 04
1N4749A Zener, 1W, 24V Nom, DO41 1N5822 Rectifier, Schottky, 40V, 3A, Case
1N4750 Zener, 1W, 27V Nom, DO41 267-03
1N4935 Rectifier, Fast Recovery, General 1N6373 Mosorb Zener Unidirectional Transient
Purpose, 200V, 1A, Case 59-03 Voltage Suppressor Diode, 300 uA at
1N4937 Rectifier, Fast Recovery, General 5 V I Reverse, Axial Leads, TVS-
Purpose, 600V, 1A, Case 59-03 Unidirectional Type, 3.5 V at 100 A V
1N5222B Zener, 2.5V 5% 0.5W DO-35 Forward
1N5230 Zener, 500mW, 4.7V Nom, DO204AH 1N755A Z.D.- 7.5V, 1/2W
1N5231 Zener, 500mW, 5.1V Nom, DO204AH 1N914 Small Signal Switching, Pkg Type DO-
1N5232B Zener, 5.6V, 500mW, 5% DO-35 35 Leaded.0.15A
1N5233B Zener, 500mW, 6V Nom, DO204AH 1SS120 Silicon Fast Switching, Package: DO-
1N5234 Zener, 500mW, 6.2V Nom, DO204AH 35
1N5236 Zener, 500W, 7.5V Nom, DO204AH FR307 Rect Fast Rec 1000V 3A DO-
1N5237B Zener, 500mW, 8.2V Nom, DO204AH 201AD
1N5240 Zener, 500mW, 10V Nom, DO204AH MUR110 Rectifier, 100V, 1A, Ultrafast
1N5242B Zener, 500mW, 12v Nom, DO204AH Recovery, Axial Lead
Fans
Fuses
AGC FUSES - FAST BLOW TYPE MDL FUSES - SLOW BLOW TYPE
1/4" Diameter x 1-1/4" Length 1/4" Diameter x 1-1/4" Length
ELECTRICAL • IC’S
Integrated Circuits (IC’s)
PART NO. DESCRIPTION
74HC373 Octal D-Type Flip-Flop Tri-State Dual-In-Line 74LS161 4-Bit Binary Counter 16p
Package 20-Pins 74LS165N Logic, TTL, 8 Bit Parallel To Serial Shift
74HC374 Octal D-Type Flip-Flop Edge-Trig Tri-State Register, 16 Lead DIP
Dual-In-Line Package 20-Pins 74LS166 8 Bit S/R S,P-In S-Out 16p
74HC393 Dual 4-Bit Binary Counter Dual-In-Line 74LS173 Quad D Reg Ts 16p
Package 14-Pins 74LS174 Hex D Flip-Flop 16p
74HC4017 Decade Ctr./Div. With 10 Decoded Outputs 74LS175 Quad D Flip-Flop 16 DIP
Dual In-Line Package 16-Pins 74LS193 Up/Down Binary Ctr 16p
74HC4020 14-Stage Binary Counter Dual-In-Line Package 74LS20 Dual 4-In Nand Gate 14 DIP
16-Pins 74LS221 Dual Ms Multivib 16p
74HC4060 14-Stage Binary Counter Dual-In-Line 74LS240 Driver Inverter, Octal 3 State
Package 16-Pins 74LS241 Octal Buffer 3-State 20p
74HC4066 Quad Analog Switch Dual-In-Line Package 74LS244 Octal Buffer 3-State 20p
14-Pins 74LS245 Octal Trans. 3-St 20 DIP
74HC573 Octal D-Type Flip-Flop Tri-State Dual-In-Line 74LS245DW 74ls Series, Octal Transceiver, True Output,
Package 20-Pins PDSO 20
74HC574 Octal D-Type Flip-Flop Tri-State Dual In-Line 74LS247 BCD To 7 Seg Decoder/Driver 16p
Package 20-Pins 74LS253 Dual 4-In Mux 3-St 16p
74HC688 8-Bit Mag. Comparator Dual-In-Line Package 74LS259 8 Bit Address. Latch 16 DIP (54ls259
20-Pins 74LS27 Trip 3-In Nor Gate 14p
74HC74 Dual D Flip-Flop Dual-In-Line Package 14-Pins 74LS273 Octal D Flip-Flop 20 DIP (54ls273)
74HCT14 Hex Inverter Schmitt Trigger Dual-In-Line 74LS32 Quad 2-In Or Gate 14p
Package 14-Pins 74LS367 Hex Buffer/Drvr 3-St 16 DIP
74HCT244 Octal Driver Tri-State Dual-In-Line Package 74LS373 Octal Transparent Latch 20p
20-Pins 74LS374 Oct D Flip-Flop 20 DIP
74HCT273 Octal D-Type Flip-Flop With Clear Dual-In-Line 74LS393 Dual 4 Bit Bin Ripple Count 14p
Package 20-Pins 74LS540 Octal Inv./Buff. 3-St 20p
74HCT373 Octal D-Type Flip-Flop Tri-State Dual-In-Line 74LS541 Oct. Non-Inv Buff. 20 DIP
Package 20-Pins 74LS574 Octal D Flip Flop 20 DIP (74hctls574
74HCT374 Octal D-Type Flip-Flop Edge-Trig. TS Dual-In- 74LS682 8-Bit Totem Pole Comparator 20p
Line Package 20-Pins 74LS73 Dual Jk Flip-Flop W/ Clear 14p
74HCT541 Octal Buffer/Line Driver Tri-State Dual-In-Line 74LS74 Dual D-Flip Flop 14dip
Package 20-Pins 74LS85N 74ls Series, 4-Bit Magnitude Com
74HCT688 8-Bit Magnitude Comparator 20-Pins Parator, True Output, Pdip16
74LS00 Quad 2-Input NAND Gate Dual-In-Line 74LS86 Quad 2 Input Excl/Or Gate 14p
Package 14 Pins 75118 Line Transceiver, General Purpose,
74LS02 Quad 2-Input NOR Gate Dual-In-Line Differential, Pkg Style 16 Lead PDIP
Package 14 Pins 75154 Rs-232 Line Receiver 16
74LS04 Hex Inverter Dual-In-Line Package 14 Pins 75174 Quad Diff. Rs422 Driver 16p
74LS05 Hex Inverter (O.C.) Dual-In-Line Package 75175 Quad Diff. Rs422 Receiver 16p
14 Pins 75176 IC,T.I. Only, Sn75176bp
74LS08 Quad 2-Input AND Gate Dual-In-Line 75183 Differential Bus Transceiver 8p
Package 14 Pins 75185 Triple Line Transceiver, Pdso20
74LS109 Dual JK Positive Edge-Triggerable Flip-Flop 75188D Line Driver, Eia Standard Rs-232-C, Single
Dual-In-Line Package 16 Pins Ended, Pkg Style 14 Lead SOIC
74LS122 Retriggerable Monostable Multivibrator 75189 Quad Line Receiver 14p(Mc1489
Comm. CLK Dual-In-Line Package 14 Pins 75451 Dual Peripheral Driver 8p
74LS123 Dual Monostable Multivibrator With Clear 75453 Dual Periph Drv DIP 8
Dual-In-Line Package 16 Pins 75C1406N IC Triple Drvr/Rcvr 16-DIP
74LS126 Quad Bus Buffer Tri-State Dual-In-Line 7805T +5V 1A Regulator, T0220 (LM340T-5)
Package 14 Pins 7812 +12V 1A Regulator
74LS138 3 To 8 Decoder/Demultiplexer Dual-In-Line 78L05 Positive 5 Volt Regulator Lp To-92
Package 16 Pins 7905T -5V 1A Regulator TO220 (7905.2)
74LS139 1 Of 4 Decoder/Demultiplexer, Number of 7912T -12V 1A Regulator TO220 (LM320T-12)
Channels: 2 8031 Mpu W/Ram And IO 12mhz 40 DIP
74LS14 Hex Schmitt Trigger 14dip 8032 8 Bit Mcu/Ram/I/O(-16)12mhz 40p
74LS147 10l To 4l Parity Encoder 16p 8051 Wire, Magnet, Solderable, 22awg,
74LS148N Oct Prior Encd Dip16 Polyurethane/Nylon Coated
74LS156 Dual 2-4 Demux OC 16p 80C31 Mpu W/Ram & IO 40 DIP 12mhz
74LS157 Multiple Non-Inverter, Number Of Channels: 80C32 8-Bit Mcu(80c32-16) 12mhz 40 DIP
4, Number Of Inputs: 2 82C55A IC,Mpu,82c55a (MB89255A)
74LS158 Quad 2-1 Mux Inv Out 16p 82S123 IC,N82S123 (AM27S19)
ELECTRICAL • IC’S
Integrated Circuits (IC’s) Con’t
PART NO. DESCRIPTION PART NO. DESCRIPTION
93C46 Serial Eprom 5v 8 DIP CD4050BCN CMOS Logic, Hex Buffer, Pkg Style 16 Lead
93C46 S/M IC, Serial Eprom, Package: 8 Pin DIP PDIP
93C56 Serial Eprom(93cs56)2048 Bit 8 DIP CMOS CD4051BCN CMOS Logic, Single 8 Channel Multiplexer,
93C66 Serial Eprom(93c66-10)4096 Bit 8p Pkg Style 16 Lead PDIP
93LC46B Serial EEPROM, Memory Configuration 64 X CD4052 Hex Invrt/Buff Dip16
16 Bit, 6 Ms Write Speed, 2 Mhz Maximum CD4066 Quad Bilateral Switch 14-DIP
Clock Frequency, CD4069 SOIC-14 Hex Inverter
93LC56B Serial EEPROM, Memory Configuration 128 CD4071 4000 Series, Quad 2-Input Or Gate, Pdip14
X 16 Bit, 6 Ms Write Speed, 2 Mhz Maximum CD4081 4000 Series, Quad 2-Input And Gate, PDIP 14
Clock Frequency CD4086BE CMOS Logic, Expandable 4 Wide 2 Input
A3951SW Full Bridge PWM Motor Driver, +/-2 A And-Or-Invert Gate
Continuous Output, -20 To +85 Degc, 20 Ma CD4093 4000 Series, Quad 2-Input Nand
Supply Current, Bipolar Sensor, 85 Deg C Gate, Pdip14
Maximum Temperature, 12 Pin, Leaded CD4094 8-St Shf/St Rg Dip16
Termination CD4098 DIP-16 Dual Multivib
ADC0804LCN A/D Converter, 8 Bit Up Compatible CD4503BCM CD4K CMOS Logic Hex 3-State Buffer
W/ Differential Input, Pkg Style 20 Lead PDIP CD4511 Bcd To 7 Ltch DIP-16
ADM202JN Driver/Receiver, High Speed, +5V, .1uf, CD4520 4500 Series, Syn Positive Edge Triggered 4-Bit
CMOS Rs-232, 16 Lead DIP Up Binary Counter, PDIP 16
ADM691AARW Microprocessor Supervisory Circuit, Power CD4556BE Decoder/Demultiplexer, 1 Of 4
Supervision, -.1 To +.02 Ua Standby Current, CD4558 Bcd-To-7 Seg Decoder
1.25 Vpower Fail Voltage, ADM691A, 4.75 To CD4584 Hex Schmitt Trigger (74C14) 40106
5.5 Vsupply Voltage, 16 Lead, Wide SOIC CD4585 IC 4-Bit Magntd Comparator 16dip
AM29F010B-120PC 128K X 8 FLASH 5V PROM, 120 Ns, ICM7218AIJI Display Driver, 8 Digital Universal Led
PDIP 32 Driver, Pkg Style 28 Lead Cerdip
AM29F040B-120PC 512K X 8 FLASH 5V PROM, 120 Ns, L201E3 Logic Triac Isolated 1.0a 200v
PDIP 32 L298N Stepper Motor Driver Chip
AT27C010-12JC IC Eprom 1m 120ns OTP 32 PLCC LA7830 Vertical Output Controller
AT27C512R-90JC IC Eprom 512k 90ns OTP 32 PLCC LA7835 Vertical Deflection Output Driver
AT29C010A-12JC IC Flash Mem 5v 1m 120ns 32 PLCC LA7837 Vertical Deflection Output Circuit
AT29C020-12PC IC Flash Mem 5v 2m 120ns 32 DIP LA7850 Deflection Circuit
AT90S2313-10PC IC Mcu 2k Flsh 10mhz Uart 20 DIP LA7851 Deflection Circuit
BA10358 DUAL OP-AMP, 7000 Uv OFFSET-MAX, LB1640 Motor Speed Controller Brake
PDIP 8 LM1203N IC,Lm1203n,Rgb Video Amp. System
CA3080E Op Amp, General Purpose, Operational LM1458 Dual Operational Amplifier, Amplifier, LM1458,
Transconductance Amp, 8 Lead PDIP +/-18 Vsupply Voltage, 8 Lead, DIP
CA3081 Transistor Array, Npn, General Purpose, LM1488 Stm Linear Integrated Circuits DIP-14 Rs232
High Currentn Pkg Style 16 Lead PDIP Driver
CD4001 CMOS Logic, NOR Gate, Pkg Style 14 Lead LM1489 Stm Linear Integrated Circuits DIP-14 Quad Ln
DIP Rcvr
CD4001BCM IC Gate Nor Buff Quad 2in 14 SOIC LM311N Comparator, Single, +/-15V Or +5V, Pkg
CD40103BE IC Sync Down Counter 8stg 16-DIP Style 8 Lead PDIP
CD40106BCM Logic, Hex Schmitt Trigger, Pkg Style 14 LM317T Voltage Regulator, Adj Positive, 1.5a, 1.2v
Lead SOIC To 37V, Pkg Style TO220
CD4011BE CMOS Logic, Nand Gate, Pkg Style 14 LM319 High Speed Dual Comparator 14p
Lead DIP LM323 IC Regulator Positive 3a 5v To-3
CD40161BE Sync 4 Bit Binary Counter 16-DIP LM324 Quad Op Amp 14dip(Ca324e)
CD40175BCN IC Flip Flop Quad D-Type 16-DIP LM3302N Comparator, Quad, Ultra Low Power,
CD40193BE IC Up/Dn Binary Counter 16-DIP Bipolar, Pkg Style 14 Lead PDIP
CD4021 8-Stg Stat Shft Reg LM337T Voltage Regulator, Adjustable, 1.5A, Negative
CD4021BCM IC Register Static 8bit 16-SOIC LM338K Adjustable Pos. 5A Regulator TO3
CD4023 Trip 3-In Nand DIP14 LM339N Comparator, Dual, +/-1V To +/-18V Or +2V To
CD4023BE 4000 Series, Triple 3-Input Nand Gate, PDIP14 +36v, Pkg Style 14 Lead PDIP
CD4024 7-St Bin Cntr DIP-14 LM340T5 Function: Positive Voltage Regulator, Voltage:
CD4027 Logic, Dual J-K Master/Slave Flip-Flop W/Set 5V
& Reset, Pkg Style 16 Lead DIP LM388N IC 1.5w Audio Pwr Amp 14 DIP
CD4028 CMOS Logic, BCD To Decimal Decoder, Pkg LM3900N Op Amp, Quad, Norton Amp, Bipolar, Pkg
Style 16 Lead DIP Style 14 Lead PDIP
CD4030 CMOS Logic, Quad Exclusive Or Gate, LM393D Comparator, Dual, Low Power, Bipolar, Pkg
Pkg Style 14 Lead DIP Style 8 Lead SOIC
CD4040 12 Stage Binary Counter 16-DIP LM393N Comparator, Dual, +/-1V To +/-18V Or +2V To
CD4042BE CMOS Logic, Quad Clocked D Latch, Pkg +36v, Pkg Style 8 Lead PDIP
Style 16 Lead DIP
ELECTRICAL • PINS
Pins
TO
08-50-0116 Brass 18-22 Molex
08-50-0189 Tin 18-20 Molex
POWER CORDS
102128-2 Tin 22-26 Amp
16-02-0096 Tin 24-30 Molex
16-02-0102 Tin 22-24 Molex
16-02-0104 Gold 22-24 Molex
16-02-0114 Tin 22-24 Molex
02-06-1103
16-02-1114 Tin 22-24 Molex
170364-1 Pre-Tin 22-18 Amp
170365-1 Pre-Tin 30-26 Amp
170366-1 Pre-Tin 30-26 Amp
350550-1 Brass 20-14 Amp
350689-1 Brass Pre-Tin 24-18 Amp
350690-1 Brass Pre-Tin 24-18 Amp
39-00-0049 Brass Pre-Tin 22-28 Molex
66099-2 Tin 18-16 Amp
66101-2 Tin 18-16 Amp
02-06-2103
66101-3 Nickel 18-16 Amp
66103-2 Bright Tin Lead 24-20 Amp
66103-3 Nickel 24-20 Amp
66105-2 Bright Tin Lead 24-20 Amp
66399-1 Tin 24-20 Amp
66399-3 Nickel 24-20 Amp
66400-1 Tin 24-20 Amp
66400-3 Nickel 24-20 Amp
770666-1 Tin 22-26 Amp
770666-2 Gold 22-26 Amp 02-09-1118
770985-1 Pre-Tin 26-22 Amp
770987-1 Pre-Tin 22-18 Amp
770988-1 Pre-Tin 22-18 Amp
87523-6 Nickel 24-20 Amp
LYM001T06 Tin 28-22 JST
SHF-001T-0.8BS Tin 28-22 JST
SHF001T0.8SS Tin 28-22 JST
SYM001T0.6 Tin 28-22 JST
02-09-1119
Power Cords
Approved
4621R 6 Outlet Metal Power Strip w/ Surge Protection & Right Angle
ELECTRICAL • POWER STRIPS
Plug, UL Approved
PT-65B 65 Watt, Single Output, Open Frame Power Supply, UL Approved
4620
Resistors
1.0 QW1D0 12 QW012 150 QW115 1.8K QW218 22K QW322 270K QW427 3.3M QW533
1.1 QW1D1 13 QW013 160 QW116 2K QW220 24K QW324 300K QW430 3.6M QW536
1.2 QW1D2 15 QW015 180 QW118 2.2K QW222 27K QW327 330K QW433 3.9M QW539
1.3 QW1D3 16 QW016 200 QW120 2.4K QW224 30K QW330 360K QW436 4.3M QW543
1.5 QW1D5 18 QW018 220 QW122 2.7K QW227 33K QW333 390K QW439 4.7M QW547
1.6 QW1D6 20 QW020 240 QW124 3K QW230 36K QW336 430K QW443 5.1M QW551
1.8 QW1D8 22 QW022 270 QW127 3.3K QW233 39K QW339 470K QW447 5.6M QW556
2.0 QW2D0 24 QW024 300 QW130 3.6K QW236 43K QW343 510K QW451 6.2M QW562
2.2 QW2D2 27 QW027 330 QW133 3.9K QW239 47K QW347 560K QW456 6.8M QW568
2.4 QW2D4 30 QW030 360 QW136 4.3K QW243 51K QW351 620K QW462 7.5M QW575
2.7 QW2D7 33 QW033 390 QW139 4.7K QW247 56K QW356 680K QW468 8.2M QW582
3.0 QW3D0 36 QW036 430 QW143 5.1K QW251 62K QW362 750K QW475 9.1M QW591
3.3 QW3D3 39 QW039 470 QW147 5.6K QW256 68K QW368 820K QW482 10M QW610
3.6 QW3D6 43 QW043 510 QW151 6.2K QW262 75K QW375 910K QW491 11M QW611
3.9 QW3D9 47 QW047 560 QW156 6.8K QW268 82K QW382 1M QW510 12M QW612
4.3 QW4D3 51 QW051 620 QW162 7.5K QW275 91K QW391 1.1M QW511 13M QW613
4.7 QW4D7 56 QW056 680 QW168 8.2K QW282 100K QW410 1.2M QW512 15M QW615
5.1 QW5D1 62 QW062 750 QW175 9.1K QW291 110K QW411 1.3M QW513 16M QW616
5.6 QW5D6 68 QW068 820 QW182 10K QW310 120K QW412 1.5M QW515 18M QW618
6.2 QW6D2 75 QW075 910 QW191 11K QW311 130K QW413 1.6M QW516 20M QW620
6.8 QW6D8 82 QW082 1K QW210 12K QW312 150K QW415 1.8M QW518 22M QW622
7.5 QW7D5 91 QW091 1.1K QW211 13K QW313 160K QW416 2.0M QW520
8.2 QW8D2 100 QW110 1.2K QW212 15K QW315 180K QW418 2.2M QW522
9.1 QW9D1 110 QW111 1.3K QW213 16K QW316 200K QW420 2.4M QW524
10 QW010 120 QW112 1.5K QW215 18K QW318 220K QW422 2.7M QW527
11 QW011 130 QW113 1.6K QW216 20K QW320 240K QW424 3.0M QW530
ELECTRICAL • RESISTORS
Resistors Con’t
1/2 Watt Metal
Value in Part Value in Part Value in Part Value in Part Value in Part Value in Part Value in Part
Ohms Number Ohms Number Ohms Number Ohms Number Ohms Number Ohms Number Ohms Number
0.10 HWD10 1.6 HW1D6 27 HW027 430 HW143 6.8K HW268 110K HW411 1.8M HW518
0.11 HWD11 1.8 HW1D8 30 HW030 470 HW147 7.5K HW275 120K HW412 2M HW520
0.12 HWD12 2.0 HW2D0 33 HW033 510 HW151 8.2K HW282 130K HW413 2.2M HW5220
0.13 HWD13 2.2 HW2D2 36 HW036 560 HW156 9.1K HW291 150K HW415 2.4M HW524
0.15 HWD15 2.4 HW2D4 39 HW039 620 HW162 10K HW310 160K HW416 2.7M HW527
0.16 HWD16 2.7 HW2D7 43 HW043 680 HW168 11K HW311 180K HW418 3M HW530
0.18 HWD18 3.0 HW3D0 47 HW047 750 HW175 12K HW312 200K HW420 3.3M HW533
0.20 HWD20 3.3 HW3D3 51 HW051 820 HW182 13K HW313 220K HW422 3.6M HW536
0.22 HWD22 3.6 HW3D6 56 HW056 910 HW191 15K HW315 240K HW424 3.9M HW539
0.24 HWD24 3.9 HW3D9 62 HW062 1K HW210 16K HW316 270K HW427 4.3M HW543
0.27 HWD27 4.3 HW4D3 68 HW068 1.1K HW211 18K HW318 300K HW430 4.7M HW547
0.30 HWD30 4.7 HW4D7 75 HW075 1.2K HW212 20K HW320 330K HW433 5.1M HW551
0.33 HWD33 5.1 HW5D1 82 HW082 1.3K HW213 22K HW322 360K HW436 5.6M HW556
0.36 HWD36 5.6 HW5D6 91 HW091 1.5K HW215 24K HW324 390K HW439 6.2M HW562
0.39 HWD39 6.2 HW6D2 100 HW110 1.6K HW216 27K HW327 430K HW443 6.8M HW568
0.43 HWD43 6.8 HW6D8 110 HW111 1.8K HW218 30K HW330 470K HW447 7.5M HW575
0.47 HWD47 7.5 HW7D5 120 HW112 2K HW220 33K HW333 510K HW451 8.2M HW582
0.51 HWD51 8.2 HW8D2 130 HW113 2.2K HW222 36K HW336 560K HW456 9.1M HW591
0.56 HWD56 9.1 HW9D1 150 HW115 2.4K HW224 39K HW339 620K HW462 10M HW610
0.62 HWD62 10 HW010 160 HW116 2.7K HW227 43K HW343 680K HW468 11M HW611
0.68 HWD68 11 HW011 180 HW118 3K HW230 47K HW347 750K HW475 12M HW612
0.75 HWD75 12 HW012 200 HW120 3.3K HW233 51K HW351 820K HW482 13M HW613
0.82 HWD82 13 HW013 220 HW122 3.6K HW236 56K HW356 910K HW491 15M HW615
0.91 HWD91 15 HW015 240 HW124 3.9K HW239 62K HW362 1M HW510 16M HW616
1.0 HW1D0 16 HW016 270 HW127 4.3K HW243 68K HW368 1.1M HW511 18M HW618
1.1 HW1D0 18 HW018 300 HW130 4.7K HW247 75K HW375 1.2M HW512 20M HW620
1.2 HW1D1 20 HW020 330 HW133 5.1K HW251 82K HW382 1.3M HW513 22M HW622
1.3 HW1D2 22 HW022 360 HW136 5.6K HW256 91K HW391 1.5M HW515
1.5M HW1D5 24 HW024 390 HW139 6.2K HW262 100K HW410 1.6M HW516
1 Watt Metal
Value in Part Value in Part Value in Part Value in Part Value in Part Value in Part Value in Part
Ohms Number Ohms Number Ohms Number Ohms Number Ohms Number Ohms Number Ohms Number
0.10 1WD10 4.3 1W4D3 56 1W056 750 1W175 11K 1W311 150K 1W415 2M 1W520
0.12 1WD12 4.7 1W4D7 62 1W062 820 1W182 12K 1W312 160K 1W416 2.2M 1W522
0.15 1WD15 5.1 1W5D1 68 1W068 910 1W191 13K 1W313 180K 1W418 2.4M 1W524
0.18 1WD18 5.6 1W5D6 75 1W075 1K 1W210 15K 1W315 200K 1W420 2.7M 1W527
0.22 1WD22 6.2 1W6D2 82 1W082 1.1K 1W211 16K 1W316 220K 1W422 3M 1W530
0.27 1WD27 6.8 1W6D8 91 1W091 1.2K 1W212 18K 1W318 240K 1W424 3.3M 1W533
0.33 1WD33 7.5 1W7D5 100 1W110 1.3K 1W213 20K 1W320 270K 1W427 3.6M 1W536
0.39 1WD39 8.2 1W8D2 110 1W111 1.5K 1W215 22K 1W322 300K 1W430 3.9M 1W539
0.47 1WD47 9.1 1W9D1 120 1W112 1.6K 1W216 24K 1W324 330K 1W433 4.3M 1W543
0.56 1WD56 10 1W010 130 1W113 1.8K 1W218 27K 1W327 360K 1W436 4.7M 1W547
0.68 1WD68 11 1W011 150 1W115 2K 1W220 30K 1W330 390K 1W439 5.1M 1W551
0.82 1WD82 12 1W012 160 1W116 2.2K 1W222 33K 1W333 430K 1W443 5.6M 1W556
1.0 1W1D0 13 1W013 180 1W118 2.7K 1W227 36K 1W336 470K 1W447 6.2M 1W562
1.1 1W1D1 15 1W015 200 1W120 3K 1W230 39K 1W339 510K 1W451 6.8M 1W568
1.2 1W1D2 16 1W016 220 1W122 3.3K 1W233 43K 1W343 560K 1W456 7.5M 1W575
1.3 1W1D3 18 1W018 240 1W124 3.6K 1W236 47K 1W347 620K 1W462 8.2M 1W582
1.5 1W1D5 20 1W020 270 1W127 3.9K 1W239 51K 1W351 68K 1W468 9.1M 1W591
1.6 1W1D6 22 1W022 300 1W130 4.3K 1W243 56K 1W356 750K 1W475 10M 1W610
1.8 1W1D8 24 1W024 330 1W133 4.7K 1W247 62K 1W362 820K 1W482 11M 1W611
2.0 1W2D0 27 1W027 360 1W136 5.1K 1W251 68K 1W368 910K 1W491 12M 1W612
2.2 1W2D2 30 1W030 390 1W139 5.6K 1W256 75K 1W375 1M 1W510 13M 1W613
2.4 1W2D4 33 1W033 430 1W143 6.2K 1W262 82K 1W382 1.1M 1W511 15M 1W615
2.7 1W2D7 36 1W036 470 1W147 6.8K 1W268 91K 1W391 1.2M 1W512 16M 1W616
3.0 1W3D0 39 1W039 510 1W151 7.5K 1W275 100K 1W410 1.3M 1W513 18M 1W618
3.3 1W3D3 43 1W043 560 1W156 8.2K 1W282 110K 1W411 1.5M 1W515 20M 1W620
3.6 1W3D6 47 1W047 620 1W162 9.1K 1W291 120K 1W412 1.6M 1W516 22M 1W622
3.9 1W3D9 51 1W051 680 1W168 10K 1W310 130K 1W413 1.8M 1W518
Resistors Con’t
2 Watt Metal
Value in Part Value in Part Value in Part Value in Part Value in Part Value in Part Value in Part
Ohms Number Ohms Number Ohms Number Ohms Number Ohms Number Ohms Number Ohms Number
0.10 2WD10 4.3 2W4D3 56 2W056 750 2W175 10K 2W310 130K 2W413 1.8M 2W518
0.12 2WD12 4.7 2W4D7 62 2W062 820 2W182 11K 2W311 150K 2W415 2M 2W520
0.15 2WD15 5.1 2W5D1 68 2W068 910 2W191 12K 2W312 160K 2W416 2.2M 2W522
TO
0.18 2WD18 5.6 2W5D6 75 2W075 1K 2W210 13K 2W313 180K 2W418 2.4M 2W524
0.22 2WD22 6.2 2W6D2 82 2W082 1.1K 2W211 15K 2W315 200K 2W420 2.7M 2W527
ELECTRICAL • RESISTORS
0.27 2WD27 6.8 2W6D8 91 2W091 1.2K 2W212 16K 2W316 220K 2W422 3M 2W530
0.33 2WD33 7.5 2W7D5 100 2W110 1.3K 2W213 18K 2W318 240K 2W424 3.3M 2W533
0.39 2WD39 8.2 2W8D2 110 2W111 1.5K 2W215 20K 2W320 270K 2W427 3.6M 2W536
0.47 2WD47 9.1 2W9D1 120 2W112 1.6K 2W216 22K 2W322 300K 2W430 3.9M 2W539
0.56 2WD56 10 2W010 130 2W113 1.8K 2W218 24K 2W324 330K 2W433 4.3M 2W543
0.68 2WD68 11 2W011 150 2W115 2K 2W220 27K 2W327 360K 2W436 4.7M 2W547
0.82 2WD82 12 2W012 160 2W116 2.2K 2W222 30K 2W330 390K 2W439 5.1M 2W551
1.0 2W1D0 13 2W013 180 2W118 2.4K 2W224 33K 2W333 430K 2W443 5.6M 2W556
1.1 2W1D1 15 2W015 200 2W120 2.7K 2W227 36K 2W336 470K 2W447 6.2M 2W562
1.2 2W1D2 16 2W016 220 2W122 3K 2W230 39K 2W339 510K 2W451 6.8M 2W568
1.3 2W1D3 18 2W018 240 2W124 3.3K 2W233 43K 2W343 560K 2W456 7.5M 2W575
1.5 2W1D5 20 2W020 270 2W127 3.6K 2W236 47K 2W347 620K 2W462 8.2M 2W582
1.6 2W1D6 22 2W022 300 2W130 3.9K 2W239 51K 2W351 68K 2W468 9.1M 2W591
1.8 2W1D8 24 2W024 330 2W133 4.3K 2W243 56K 2W356 750K 2W475 10M 2W610
2.0 2W2D0 27 2W027 360 2W136 4.7K 2W247 62K 2W362 820K 2W482 11M 2W611
2.2 2W2D2 30 2W030 390 2W139 5.1K 2W251 68K 2W368 910K 2W491 12M 2W612
2.4 2W2D4 33 2W033 430 2W143 5.6K 2W256 75K 2W375 1M 2W510 13M 2W613
2.7 2W2D7 36 2W036 470 2W147 6.2K 2W262 82K 2W382 1.1M 2W511 15M 2W615
3.0 2W3D0 39 2W039 510 2W151 6.8K 2W268 91K 2W391 1.2M 2W512 16M 2W616
3.3 2W3D3 43 2W043 560 2W156 7.5K 2W275 100K 2W410 1.3M 2W513 18M 2W618
3.6 2W3D6 47 2W047 620 2W162 8.2K 2W282 110K 2W411 1.5M 2W515 20M 2W620
3.9 2W3D9 51 2W051 680 2W168 9.1K 2W291 120K 2W412 1.6M 2W516 22M 2W622
.10 5WD10 0.39 5WD39 1.2 5W1D2 6.8 5W6D8 56 5W056 470 5W147 3.9K 5W239
.12 5WD12 .43 5WD43 1.5 5W1D5 8.2 5W8D2 68 5W068 560 5W156 4.7K 5W247
.15 5WD15 .47 5WD47 1.8 5W1D8 10 5W010 82 5W082 680 5W168 5.6K 5W256
.18 5WD18 .51 5WD51 2.2 5W2D2 12 5W012 100 5W110 820 5W182 6.8K 5W268
.20 5WD20 .56 5WD56 2.7 5W2D7 15 5W015 120 5W112 1K 5W210 8.2K 5W282
.22 5WD22 .62 5WD62 3.3 5W3D3 18 5W018 150 5W115 1.2K 5W212 8.5K 5W285
.24 5WD24 .68 5WD68 3.9 5W3D9 22 5W022 180 5W118 1.5K 5W215 10K 5W310
.27 5WD27 .75 5WD75 4.7 5W4D7 27 5W027 220 5W122 1.8K 5W218 11K 5W311
.30 5WD30 .82 5WD82 5.0 5W5D0 33 5W033 270 5W127 2.2K 5W222 12K 5W312
.33 5WD33 .91 5WD91 5.1 5W5D1 39 5W039 330 5W133 2.7K 5W227 15K 5W315
.36 5WD36 1.0 5W1D0 5.6 5W5D6 47 5W047 390 5W139 3.3K 5W233
Sockets
PART NO. DESCRIPTION
Starters
PART NO. WATTS Operation Voltage
ELECTRICAL • SWITCHES
Cherry Switches
PART NO. DESCRIPTION FIGURE
Fig. A
E13-00M Single Pole Door Switch With Metal Button, 15 Amp, .250 Q.D. A
E13-50H Single Pole Door Switch With Lever, 15 Amp, .250 Q.D. A
G13-00H Single Pole Door Switch With Lever, 0.1 Amp, .250 Q.D. A
E21-50K Light Force Snap Switch With Roller, 0.1 Amp, .187 Q.D. F
E61-00K Subminiature Snap Switch With Roller, 5 Amp, .093 Q.D. B
E61-80K Subminiature Snap Switch With Roller, 5 Amp, .110 Q.D. B
E62-30A Subminiature Snap Switch (Poker Button), 10 Amp, .110 Q.D. B Fig. B
E63-30H Subminiature Snap Switch With Lever, 0.1 Amp, .110 Q.D. B
E68-00A Panel Mount Door Switch, Long Button, 0.1 Amp, .187 Q.D. C
E69-30A Panel Mount Door Switch Long Button With "Cheat Interlock", 10 Amp, .187 Q.D. C
E79-00A Panel Mount Door Switch, Long Button, 10 Amp, .187 Q.D. D
E79-30A Panel Mount Door Switch Long Button With "Cheat Interlock", 10 Amp, .187 Q.D. D
E79-40A Panel Mount Door Switch, Short Button, 10 Amp, .187 Q.D. D
DA3C-B1LB Subminiature Snap With Roller, 0.1 Amp, .110 Q.D. E
D41C-V1AA Miniature Snap, 0.1 Amp, .250 Q.D., Button Only F Fig. C
D44L-R1AA Miniature Snap, 10 Amp, .187 Q.D. F
D45L-R1LL Miniature Snap, 15 Amp, .187 Q.D., With Lever F
GC Switches Fig. D
Fig. G
Misc. Switches
PART NO. DESCRIPTION FIGURE Fig. H
1200-03-155 Low Cost, High Quality Poker Button Switch, .110 Q.D. B
SS5GL2T Bill Validator Door Switch With Roller B
F5T8 Keno Pen Switch
4040-12 Recessed Switch 3/8" With Leads, SPDT I
Fig. I
Tape
ELECTRICAL • TRANSISTORS
Transistors
Transistors Con’t
PART NO. DESCRIPTION
2SC1815 Bipolar Package/Pin Name: TO-92/ECB, Collector To Base Voltage: 60 V, Collector To Emitter
Voltage: 50 V, Collector Current: .15 A, PC TA=25C: .4 W
2SC1890 Voltage: 90 V, Current: .05 A, Power: .3 W, Frequency: 200 Mhz, Type: SI-N
2SC2275 Voltage: 120 V, Current: 1.5 A, Power: 25 W, Frequency: 200 Mhz, Type: SI-N
2SC2344 Voltage: 180 V, Current: 1.5 A, Power: 25 W, Frequency: 120 Mhz, Type: SI-N
2SC2611 Voltage: 300 V, Current: .1 A, Power: .8 W, Frequency: 80 Mhz, Type: SI-N
2SC2655 Voltage: 50 V, Current: 2 A, Power: .9 W, Type: SI-N
2SC2682 Voltage: 180 V, Current: .1 A, Power: 8 W, Frequency: 180 Mhz, Type: SI-N
2SC2688 Bipolar Collector To Base Voltage: 300 V, Collector To Emitter Voltage: 300 V, Collector Current:
.2 A, Package/Pin Name: TO-126/ECBC
2SC2749 Voltage: 500 V, Current: 10 A, Power: 100 W, Frequency: 50 Mhz, Type: SI-N
2SC3039 Voltage: 500 V, Current: 7 A, Power: 52 W, Type: SI-N
2SC3040 Bipolar Collector To Base Voltage: 500 V, Collector To Emitter Voltage: 400 V, Collector Current: 8
A, Package/Pin Name: TO-3PB/BCE
2SC3153 Voltage: 900 V, Current: 6 A, Power: 100 W, Type: SI-N
2SC3198 Voltage: 60 V, Current: .15 A, Power: .4 W, Frequency: 130 Mhz, Type: SI-N
2SC3229 Type: NPN, Silicon High Voltage For Video Out, Package: TO-126M
2SC3281 Voltage: 200 V, Current: 15 A, Power: 150 W, Frequency: 30 Mhz, Type: SI-N
2SC3331 Voltage: 60 V, Current: .2 A, Power: .5 W, Frequency: 200 Mhz, Type: SI-N
2SC3421 Type: NPN, Silicon Af Driver, Package: To-126
2SC3461 Voltage: 1100/800 V, Current: 8 A, Power: 120 W, Type: SI-N
2SC3467 Voltage: 200 V, Current: .1 A, Power: 1 W, Frequency: 150 Mhz, Type: SI-N
2SC3675 Voltage: 1500/900 V, Current: .1 A, Power: 10 W, Type: SI-N
2SC3686 Type: NPN, Silicon Horizontal Output, Package: To-3p
2SC3688 Voltage: 1500 V, Current: 10 A, Power: 150 W, Type: SI-N
2SC3782 Voltage: 200 V, Current: .2 A, Power: 15 W, Frequency: 400 Mhz, Type: SI-N
2SC3788 Voltage: 200 V, Current: .1 A, Power: 5 W, Frequency: 150 Mhz, Type: SI-N
2SC3950 Voltage: 30 V, Current: .5 A, Power: 5 W, Type: SI-N
2SC4108 Type: NPN, Silicon High Voltage Switch, Package: To-218
2SC4125 Voltage: 1500/800 V, Current: 10 A, Power: 70 W, Type: SI-N+D
2SC4138 Voltage: 500 V, Current: 10 A, Power: 80 W, Type: SI-N
2SC4159 Voltage: 180 V, Current: 1.5 A, Power: 15 W, Frequency: 100 Mhz, Type: SI-N
2SC4533 Type: NPN, Silicon High Voltage/Speed Switch
2SC4542 Voltage: 1500 V, Current: 10 A, Power: 50 W, Type: SI-N
2SC478 Sot-323 NPN Hi-Freq
2SC4834 Voltage: 500 V, Current: 8 A, Power: 45 W, Type: SI-N
2SC5129 Type: NPN, Silicon Horizontal Out, Package: To-3p
2SC5149 Voltage: 1500 V, Current: 8 A, Power: 50 W, Type: SI-N
2SC5150 Voltage: 1700 V, Current: 10 A, Power: 50 W, Type: SI-N
2SC5387 General Purpose Transistor
2SC945 Voltage: 50 V, Current: .1 A, Type: SI-N
2SD1062 Polarity: SI-N, Voltage: 60 V, Current: 12 A, Power: 40 W, Frequency: 10 Mhz
2SD1138 Polarity: SI-N, Voltage: 200 V, Current: 2 A, Power: 30 W
2SD1347 Voltage: 60 V, Current: 3 A, Power: 1 W, Frequency: 150 Mhz, Type: SI-N
2SD1398 Voltage: 1500 V, Current: 5 A, Power: 50 W, Type: SI-N+D
2SD1623 Voltage: 60 V, Current: 2 A, Power: .5 W, Mounting Style: Surface Mount
2SD1880 Voltage: 1500 V, Current: 8 A, Power: 70 W, Type: SI-N+D
2SD2331 Matsushita Transistor Top-3d 1500v 3a 60w
2SD386A To-220 NPN Vert Defl
2SD600 Voltage: 100 V, Current: 1 A, Power: 8 W, Type: SI-N
2SD613 Voltage: 100 V, Current: 6 A, Power: 40 W, Frequency: 15 Mhz, Type: SI-N
2SD633 Type: NPN, Silicon Darlington, Voltage: 80 V, Package: To-220
2SD768 Voltage: 120 V, Current: 6 A, Power: 40 W, Type: N-Darl+D
2SD837 Voltage: 60 V, Current: 4 A, Power: 40 W, Type: N-Darl
2SD871 Voltage: 1500 V, Current: 5 A, Power: 50 W, Type: SI-N+D
2SD879 Voltage: 30 V, Current: 3 A, Power: .75 W, Frequency: 200 Mhz, Type: SI-N
2SK1082 To-3p N-Ch 900v 8a
2SK1221 Voltage: 250 V, Current: 10 A, Power: 80 W, Type: N-Fet
ELECTRICAL • TRANSISTORS
Transistors Con’t
PART NO. DESCRIPTION
Transistors Con’t
PART NO. DESCRIPTION
Gaming
GAMING
Hopper
Nylon Hopper Knife, 5 Star Agitator
Small
PART NO. 5 STAR
PART NO. 6300
GAMING • SHOCKS
Shocks
Bally Slant Top Shock Spring Lift Shock,
45 LB., For IGT Bar
PART NO. 1615EL Top
Miscellaneous
65 Watt, Single Programmer DIP To
Output, Open Frame PLCC Module
Power Supply, UL
Approved PART NO.
OPTCM6323211TT
PART NO. PT-65B
Red
PART NO. SDB-03-RED
Orange
PART NO. SDB-03-OR
Ithaca
ITHACA
Ithaca Products
PART NO. DESCRIPTION PART NO. DESCRIPTION
72 ITHACA www.age-gaming.com
Ithaca
OUR PRINTER
MODEL 750 - Prints on 62 mm x 120 mm, 65 mm x
120 mm, 65 mm x 156 mm (dollar-bill size) tickets
NOTE: 65 mm x 156 mm ticket r equires no printing
on last 1.4 inches of each ticket
OUR PHYSICAL CHARACTERISTICS Front Bezel Ticket Supply Box Drawer Chassis Slider
MODEL 750 - 139 mm W x 85 mm H x 159 mm D OUR POWER REQUIREMENTS
(5.46 in. W x 3.36 in. H x 6.27 in. D) • 24VDC: 1.5A (supplied by system)
Overall Size with All Options • Exit Lamp: 13VDC @ 150mA (supplied by system)
(with 120 mm length ticket supply box):
• 139 mm W x 85 mm H x 287 mm D
OUR OPTIONS
(5.46 in. W x 3.36 in. H x 11.29 in. D)
• Illuminated Front Bezel
• Weight: 3.31 kg (7.30 lbs.)
• Ticket Present Sensor
Overall Size with All Options • Ticket Supply Box
(with 156 mm length ticket supply box): (Three sizes available: 62 mm x 120 mm; 65 mm x
• 139 mm W x 85 mm H x 325 mm D 120 mm; 65 mm x 156 mm)
(5.46 in. W x 3.36 in. H x 12.8 in. D) • Drawer Chassis Slider (including power PCB)
• Weight: 3.41 kg (7.50 lbs.)
OUR FEATURES AND BENEFITS
OUR PRINTING CHARACTERISTICS • Print Resolution: 8 dots per mm (203dpi) Horizontal & Vertical
• Print Speed: 51 mm/sec (2 in. per second) • Easy Ticket Loading
• Five Fonts: 7.5 cpi, 10 cpi, 12 cpi, 16.5 cpi, • Print Zone Width: 56 mm (2.205 in.)
and 20 cpi • Data Buffer: 4K
• Nor mal, Double-high, Double-wide, and • Memory: 64K EPROM & 32K RAM
Double-high/Double-wide print modes • Self Diagnostics
• Standard Warranty: 1 year
• Bar Code: Code 3 of 9, Interleaved 2 of 5, UPC-A & UPC-E, Codabar,
OUR MEDIA (Thermal Ticket, Fan Fold, Perforated) EAN8 & EAN13, Code 128, and Postnet
• Type: Top coated, high sensitivity , direct ther mal • Ticket Low Sensor
(Kanzaki TO-381N or approved equivalent) • Top of For m/Ticket-Out Sensor
• Thickness: 0.112 mm (0.0044 in.) • High Quality Printing: Text, Barcodes, Graphics, Lines
• Width x Length: 62 mm (2.44 in.) x 120 mm (4.73 in.); • Bitmap Graphics, Portrait, and Landscape Printing
65 mm (2.56 in.) x 120 mm (4.73 in.); • Ticket is contained within the printer until printing is complete, pr eventing
65 mm (2.56 in.) x 156 mm (6.14 in.) dollar-bill size user interference.
• Standard Store: 400 tickets per stack
OUR RELIABILITY
OUR INTERFACE • Printhead Life: 25 km
• Bi-Directional RS232C
• CTS and/or XON/XOFF Handshake
OUR ENVIRONMENT AL SPECS
NOTE: CTS not included with drawer chassis option
• Operating Temperature: 0 C to + 40 C
• Storage Temperature: -20 C to + 70 C
• Operating Humidity: 5 to 95% RH Non-Condensing
Snap-in/snap-out ribbon
cassette for quick, easy
eplacement.
Impact printing at
4.9 lines per second.
ÒPaper LowÓ indicator alerts
you before paper roll runs out.
JCM
JCM
038989 041738
037572
78 JCM www.age-gaming.com
JCM
JCM • DBV-200
DBV-200 Exploded View
54
54
46 54 1
54
47
30
54
39
54 56
58 31
4
6
5 3
4 3
6 4 32
50 35 57
5 3
7 (B) 4
37 (A) 58
56
55
41 53 40
53 41 8 (B)
38 (A) 57
9
35
50
55
33 (B)
42 10 10 48 (A)
11 11 55
43
12 12
10 34
13 11
12
51 14
60 17 51
54
54 16
62 36
18 60
19 52 15
60 20
56
49 25
60 25 52
60
26 2660 56
26 60 26 28
20 44 52 56
26 60
29
26 56
61
24 49
46 61 17
60
18
62 16
47 22
20 22
60
27 19
20 60 23
57
Ref Part
No. No. Description Qty.
1 063342 Upper Frame Assy. 1
3 052639 TR Spring 2 4
4 063336 Roller A 4
5 063347 R Shaft 2
6 052518 SP Stopper 2
9 059526 Con Gear 1
10 063326 Roller M 3
11 063348 M Shaft 3
12 163353 MG Spring 3
17 063357 Pulley D 2
18 063355 Pulley A 2
19 063325 Roller B 2
20 063356 Pulley B 4
21 063346 PG Shaft 1
22 063345 P Shaft 2
23 063323 Gear B 1
24 063343 Gear Frame AS 1
25 063327 DS Bearing 2
26 063332 SH Bushing 6
27 063368 Motor 1
KROY
Kroy
82 KROY www.age-gaming.com
Kroy
DuraType 244RS/240SE includes: (1) Printer, (1) AC Adapter and Owner’s Manual. Printers do not come with sup-
ply cartridge. Printers operate on batteries or AC adapter.
General Purpose Label Supply
Labeling .50”x.50’ Labeling .50”x.50’
Black image on clear 2227501 Black image on blue 2227531
White image on clear 2227502 White image on blue 2227532
Blue image on clear 2227503 Black image on red 2227535
Red image on clear 2227504 White image on red 2227536
Black image on white 2227516 Black image on green 2227539
Blue image on white 2227517 White image on green 2227540
Red image on white 2227518 Black image on yellow 2227543
Green image on white 2227519 Black image on orange 2227548
White image on black 2227520 White image on orange 2227549
Black image on silver 2227521 Architectural and Engineering 2227553
Black image on gold 2227526
Industrial Label Supply
Labeling .50”x.50’ Labeling .50”x.50’
Black image on clear 2357501 White image on blue 2357532
White image on clear 2357502 Black image on red 2357535
Black image on white 2357516 White image on red 2357536
White image on black 2357520 Black image on green 2357539
Black image on silver 2357521 White image on green 2357540
Black image on gold 2357526 Black image on yellow 2357543
Black image on orange 2357548
K750
K750 - 5 label widths from 1/4” to 1” - Eight-line capacity - Create customized address, video, diskette, and warning labels with built-
in templates - 4 fonts including (Helvetica, Gothic, Script, Roman) - 7 type sizes from 6 to 48 point and 11 different type styles - 8
resident bar codes - Auto-character height - Auto label-size sensing - Print preview - Over 200 clip-art images.
K750 includes: (1) Printer, (6) AA Batteries, (2) Supply Cartridge and Owner’s Manual.
1/4” Label Supply 1/4”x26’(6.35mmx7.6m) 3/4” Label Supply 3/4”x26’(19.05mm x 7.6m)
K2500/K3000-PC
K2500 - Portable thermal printer - 203 DPI resolution - Resident type style corresponding to Helvetica - Resident bar code sym-
bologies: 3 of 9, I2 of 5, 128, UPC-A, UPC-E, EAN-8, EAN-13, CODABAR, code 39, code 128, check digit calculation - One to six
line printing - 67 type sizes from 6 point to 72 point in single point increments (1/16” to .75”) - Underline - Bold - Frame - Italic -
Mirror - Vertical - Label formatting - Auto-repeat (1-999) - Alpha and numeric sequencing - 6000 character memory - Auto shut-off -
RS 232 port - Left, right and center justified text function - Line identification function - Line out function - Feed control - Audible
key clicks and error messages - Real-time clock - PDF-417 - MSI-Plessey - Prints on a wide variety of media.
K2500 includes: (1) Printer with the protective jacket, (6) Ni-Cad C-Cell Batteries, (1) Battery Charger and Owner’s Manual.
Printers do not come with supply cartridge. K2500 operates on batteries or AC adapter.
K2500 Accessories
KROY • K2500/K300-PC
K2500/K3000-PC Con’t
Polyester Industrial Label Supply
2.0 mil pressure sensitive polyester and thermal transfer resin ribbon in a cartridge - Up to 7 year exterior life; chemical, water,
UV and abrasion resistant. Operating temperature range of -40 degrees to 320 degrees Fahrenheit (160 degrees Celcius) -
High performance label stock.
Industrial UV & Chemical Resistant Cartridge Supply Industrial UV & Chemical Resistant Cartridge Supply
.50” x 40’ Old Part No. New Part No. .8” x 40’ Old Part No. New Part No.
Black image on clear 2558501 2487901 Black image on clear 2438201 2438701
Black image on white 2558516 2487916 Black image on white 2438216 2438716
Black image on yellow 2558543 2487943 Black image on yellow 2438243 2438743
White image on black NA 2487920
K2500
K2500/K3000-PC Con’t
1/8” (3.2mm) Black on white 2470001 1/8” (3.2mm) Black on yellow 2470002
3/16” (4.8mm) Black on white 2470011 3/16” (4.8mm) Black on yellow 2470012
1/4” (6.4mm) Black on white 2470021 1/4” (6.4mm) Black on yellow 2470022
3/8” (9.6mm) Black on white 2470031 3/8” (9.6mm) Black on yellow 2470032
1/2” (12.8mm) Black on white 2470041 1/2” (12.8mm) Black on yellow 2470042
S Plus Parts
S PLUS PARTS
S PLUS PARTS
IGT S Plus Parts Cont.
S PLUS PARTS
IGT S Plus Parts Cont.
S PLUS PARTS
IGT S Plus Parts Cont.
Dollar Endcoder
Quarter Endcoder
Tools
TOOLS
96 TOOLS www.age-gaming.com
Tools
TOOLS
Long Reach Screwdriver Amp, Terminating Head For
With Plastic Handle Material: MTA-100
Fiberglass Shaft: 1/8" (3.2
Mm) Dia., 12" (30.5 Cm) PART NO. 58246-1
Long Ends: 1/32" Thick
Screwdriver Tip; 2-3/8" (6
Cm) Long Screwdriver
Handle Total Length: 14-3/8"
(36.5 Cm)
Amp, Pistol Grip IDC Hand Manual Repair Tool For MTA-
Tool with Ratchet Control 156 (.156)
LE
ND
HA SY
AS 4-1
7
580
PART NO. 58074-1 PART NO. 59804-1
98 TOOLS www.age-gaming.com
Tools
TOOLS
7 3/4" Horse Hair Bristles Palm Grip Pliers, Flush
Cutter
PART NO. 2020-1
PART NO. 12-200
TOOLS
Phillips Bit #1 Long 7/64" Drill Bit
Touch Screens
TOUCH SCREENS - 3M
Capacitive touch screen solutions are the clear choice wherever perform-
ance demands are high. From kiosks to gaming applications, they're environ-
mentally robust, and durable, yet highly sensitive with superb optical clarity.
Black
PART NO. EXII-1040SC
Uncased
Black
PART NO. EXII-1030SC
Uncased
WELLS-GARDNER MONITORS
World Wide Leader in
Video Displays
17”& 18”Multi-Resolution
Digitally-Controlled
Model D9100
R E P L A C E M E N T PA RT S L I S T
Main, Neck & Control PCB Assembly Parts List
TRANSFORMERS MISCELLANEOUS
DESI G N AT I O N DE S CRI P T I ON PART NO . D ESIG N ATIO N D ESCR IPTIO N PA RT N 0.
WELLS-GARDNER • D9100
17” & 18”Multi-Resolution
Digitally-Controlled
Model D9100
WHITE RED
CUSTOMER REMOTE CONTROL BOARD FOCUS FOCUS
PC1X9100
WHT
VIDEO NECK BOARD
W506 PN1X9100
1 02
SW
4
10
SW
W402
UP
0 1 N SG* SIGNAL
SW1 OW GROUND PIN
3 D
10 L
SW SE
DE TO
MO
W403
DAG
GROUND
G2
W401*
W403
W403
W6
03
* W601
01 *NOTE: SIGNAL INPUT
P6
W104
CABLE TERMINATIONS
+12VDC W301 P601 – SYNCS INPUT
W103 W401 – VIDEO INPUT
+5VDC WHITE SG – CABLE GROUND
FOCUS
RED
FOCUS
FOCUS F1
FOCUS F2
PF1X9100
TO VIDEO DYNAMIC FOCUS BOARD CABLE VIDEO
SCREEN G2 NECK SHIELD C O N N E C TO R
(HOT MELT) IN SOME MODELS
C A B L E V I D E O C O N N E C TO R
AC INPUT C O N N E C TOR: P601 15 Pin Subminiature D-type
Model D9200
R E P L A C E M E N T P A R T L I S T
PD279200 PCB RSDD D9200 PD279200 PCB RSDD D9200
CGA/EGA/VGA DEFL B D C G A / E G A / V G A D E F L B D (cont.)
D E S I G N AT I O N DESCRIPTION P A RT NO. D E S I G N AT I O N DESCRIPTION P A RT NO.
D301 DIODE RECT 1N4002 1A 200V 066X0159-001 F801A FUSE CLIP FC-21D 2D5NJ41FC21D
D404 DIODE RECT 1N4004 1A 400V 066X0160-001 IC101 SOCKET IC 42 PIN (PC) 003A0716-001
D405 DIODE RECT S2L60 1.5A 600V 066X0172-001 IC101 IC U-COM #KS88C6116 086X0365-002
D408 DIODE RECT-FAST 066X0171-001 IC102 IC KA7542Z (UKA7542Z-N) 086X0372-001
11DQ04 1A 45V IC103 IC KS24C02 086X0394-001
D409 DIODE RECT D5L60 5A 600V 066X0173-001 IC301 IC TDA8172 VERT IC DEFL SGS 086X0364-001
D410 DIODE RECT RGP02-16E 066X0161-001 IC401 IC PWM UC3842AN 086X0257-001
.5A 1600V IC402 IC KA358 086X0395-001
D411 DIODE RECT RL4A 3A 600V 066X0162-001 IC403 IC KB2147 DEFL PROCESSOR 086X0396-001
D412 DIODE RECT FMP-G2FS 066X0163-001 IC404 IC PWM UC3842AN 086X0257-001
5A 1500V IC801 IC LATCHED UNIV 086X0412-001
D414 DIODE RECT 1N4936 1A 400V 066X0164-001 INOUT-VOLTAGE SW-
D415 DIODE RECT 1N4936 1A 400V 066X0164-001 (SANKEN STR83145)
D416 DIODE RECT GUF4001 1A 50V 066X0165-001 IC802 IC PWM UC3842AN 086X0257-001
D417 DIODE RECT FMQ-G5FS 066X0167-001 IC803 IC MC7812ACT V REG MOT 086X0243-001
10A 1500V IC804 TRSTR MC7805CT V REG 086X0200-001
D418 DIODE RECT GUF4005 066X0166-001 IC805 IC PHOTO-OPTOISOLATOR 086X0367-001
1A 600V (CNY17-3)
D421 DIODE 1N4148 066X0099-001 IC806 IC KA431AZ 086X0398-001
D422 DIODE RECT-FAST 066X0171-001 BD801 DIODE BRIDGE RECT 066X0176-001
11DQ04 1A 45V D3SBA60 2A 800V
D423 DIODE RECT-FAST 066X0171-001 (4A W/HEATSINKS)
11DQ04 1A 45V Q103 TRSTR PNP 2SA733Q 086X0379-001
D424 DIODE 1N4148 066X0099-001 Q105 TRSTR NPN 2SC945P 086X0380-001
D425 DIODE 1N4148 066X0099-001 Q106 TRSTR NPN KSC2316 086X0429-001
D426 DIODE 1N4148 066X0099-001 (FAIRCHILD)
D427 DIODE 1N4148 066X0099-001 Q107 TRSTR PNP KSA1013-Y 086X0382-001
D428 DIODE 1N4148 066X0099-001 Q108 TRSTR NPN 2SC945 086X0380-001
D429 DIODE 1N4148 066X0099-001 Q306 TRSTR NPN KSA2330Y 086X0383-001
D431 DIODE RECT GUF4001 1A 50V 066X0165-001 Q307 TRSTR NPN KSR1002 086X0384-001
D433 DIODE RECT 1N4004 1A 400V 066X0160-001 Q401 TRSTR NPN KSC1845-F 086X0385-001
D434 DIODE 1N4148 066X0099-001 Q402 TRSTR NPN KSC1845-F 086X0385-001
D801 DIODE RECT 1.2A 1000V 066X0179-001 Q403 TRSTR NPN 2SC945P 086X0380-001
(RM11C SANKEN) Q404 TRSTR PNP 2SA733Q 086X0379-001
D802 DIODE 1N4148 066X0099-001 Q405 TRSTR NPN 2SC945P 086X0380-001
D803 DIODE 1N4148 066X0099-001 Q406 TRSTR PNP 2SA733Q 086X0379-001
D804 DIODE 1N4148 066X0099-001 Q407 FET IRF644A 086X0386-001
D805 DIODE 1N4148 066X0099-001 Q408 TRSTR NPN KSC2310 086X0381-001
D806 DIODE RECT 1A 800V 066X0180-001 Q410 TRSTR NPN KSC1845-F 086X0385-001
GUF4006 Q411 TRSTR PNP 2SA1370 086X0387-001
D807 DIODE RECT 1N4936 1A 400V 066X0164-001 Q412 TRSTR NPN 2SC945P 086X0380-001
D809 DIODE RECT D2L20U 066X0169-001 Q413 FET IRF644A 086X0386-001
1-3A 200V Q414 FET 2N7000 086X0390-001
D810 DIODE RECT D2L20U 066X0169-001 Q428 TRSTR NPN 2SC945P 086X0380-001
1-3A 200V Q430 TRSTR NPN KSR1002 086X0384-001
D811 DIODE RECT 1.5A 600V RUA4 066X0177-001 Q801 TRSTR NPN 2SC945P 086X0380-001
D812 DIODE RECT D2L20U 066X0169-001 Q802 FET 2SK2676 086X0393-001
1-3A 200V T901 FLBK TFMR D9200 27" 053X0658-001
D813 DIODE RECT S3L604004 066X0170-001 ZD101 ZENER DIODE 5.1V 5% 066X0040-028
1.8A 600V ZD102 ZENER DIODE 5.1V 5% 066X0040-028
D814 DIODE RECT S3L604004 066X0170-001 ZD401 ZENER DIODE 9.1V 5% 0.5W 066X0040-020
1.8A 600V ZD402 ZENER DIODE 12V 5% 0.5W 066X0040-051
D901 DIODE RECT 1N4002 1A 200V 066X0159-001 ZD403 ZENER DIODE 12V 5% 0.5W 066X0040-051
D902 DIODE RECT 1N4002 1A 200V 066X0159-001 ZD404 ZENER DIODE 31V 5% 0.4W 066X0040-004
F801 FUSE BUSSMANN S506 016X0216-001 ZD901 ZENER DIODE 6.2V 5% 0.5W 066X0040-036
250V 3.15A
WELLS-GARDNER • D9200
27” & 33”Multi-Resolution
Digitally-Controlled
Model D9200
PO
CG
EG A/
SIT NOT
HO ION E TH
OK FO E V
-U R ID
Chassis Diagram
A P: EA EO
VG CH C
A v R ABL
VG s C ESP E
A GA EC
/EG TIV
A E
VGA
REMOTE CONTROL BOARD HOOK-UP R
G
B
G CG
V ND EG A/
H
V CO /V A VG
IN IDEO MP A G2
TE
3 RF /SY
10 AC NC CG
SW EB HO A/E
102 D OK GA
SW -U
P
4
10
SW DE
5 MO
10 L SYNC
SE
SW DECODER P202
UP
N P204
W P201
DO
LW801
P203
P5
02 VIDEO NECK BOARD
NEUTRAL
(WHT)
GROUND
(GREEN)
HOT
(BLK) W801
AC HOOK-UP W105
W804
CURRENTLY
(NOT USED)
DEFLECTION BOARD
VR101
RASTER (CURRENTLY NOT USED)
ROTATION
FOCUS
DIODES
D E S I G N AT I O N DESCRIPTION P A RT N O .
I N T E G R ATED CIRCUITS
D E S I G N AT I O N DESCRIPTION P A RT N O .
T R A N S F O R M E R S
D E S I G N AT I O N DESCRIPTION P A RT N O .
TRANSISTO R S
D E S I G N AT I O N DESCRIPTION P A RT N O .
VARIABLE POTENTIOMETERS
D E S I G N AT I O N DESCRIPTION P A RT N O .
MISCELLANEOUS
D E S I G N AT I O N DESCRIPTION P A RT N O .
WELLS-GARDNER • K7200
13” Standard Resolution: 15khz
Model K7200
Chassis Diagram
R E P L A C E M E N T PA R T S L I S T
Main, Neck & Control PCB Assembly Parts List
DIODES
D E S I G N AT I O N DESCRIPTION P A RT N O .
I N T E G R ATED CIRCUITS
D E S I G N AT I O N DESCRIPTION P A RT N O .
T R A N S F O R M E R S
D E S I G N AT I O N DESCRIPTION P A RT N O .
TRANSISTO R S
D E S I G N AT I O N DESCRIPTION P A RT N O .
VARIABLE POTENTIOMETERS
D E S I G N AT I O N DESCRIPTION P A RT N O .
MISCELLANEOUS
D E S I G N AT I O N DESCRIPTION P A RT N O .
WELLS-GARDNER • K7200
19” Standard Resolution: 15khz
Model K7200
Chassis Diagram
D001 DIODE BYT54M 1KV 2ARAD0054-001 VR001, VR105 TRIM POT 5000 OHM 0.15W 040X0711-008
D002, D003, D501 DIODE FF1003 2ARAD1003-001 VR401, VR603 TRIM POT 100K OHM 0.15W 040X0711-013
D101, D102 DIODE BYV36D 800V 2ARHD0036-001 VR102, VR501 TRIM POT 2000 OHM 0.15W 040X0711-006
D103, D104, D105, DIODE RECT 400V 2A HER205 2ARAD0205-001 VR101, VR106, TRIM POT 10K OHM 0.15W 040X0711-009
D603, D604 VR502
D301, D302, D303, DIODE SW 1N4148 2ARAD4148-001 VR103 TRIM POT 30K OHM 0.15W 040X0711-011
D304, D305, D306, VR601 TRIM POT 100 OHM 0.15W 040X0711-001
D307, D308, D309, VR602 TRIM POT 50K OHM 0.15W 040X0711-012
D311, D312, D402, VR104 TRIM POT 200K OHM 0.15W 040X0711-014
D403, D605, D004 VR801, VR803, TRIM POT 2K OHM 20% 0.15W 2AMRT1202-002
D401 RECTIFIER 1N4002 2ARAD4002-001 VR805
D502 DIODE HER 104 2ARAD0104-001 VR802, VR804, TRIM POT 200 OHM 20% 0.15W 2AMRT1201-002
D503 DIODE ULTRAFAST 200V 1A 066X0130-001 VR806 MISCELLANEOUS
D601 DIODE DAMPER 1400V. 3 AMP 066X0125-001
D602 DIODE FUF5407 FAST REC 3A 2ARAD5407-001
MISCELLANEOUS
D E S I G N ATION DESCRIPTION P A RT N O .
D801, D802, D803 SANYO GMA02 066X0062-001
D804 DIODE HER 104 2ARAD0104-001 R005 RES 0.15 OHM5% 2W MF 2AQHM2050-158
ZD001 DIODE ZENER 36V 2ARAZ0859-091 R009 RES 330 OHM 5% 2W MF 2AQHM2050-331
ZD101 ZENER DIODE 6. 5% O.5W 066X0040-018 R100 RES 1K OHM 5% 3W MF 2AQHM3050-102
ZD401 DIODE ZENER 3.2 - 3.4V .5W 2ARAZ0859-062 R102 RES 3.9 OHM 5% 3W MF/MO 340X6039-633
R105 RES .47 OHM 5% MF 2AQM1050-478
I N T E G R ATED CIRCUITS R420 RES 180 OHM 5% 1W MF 2AQHM1050-181
D E S I G N AT I O N DESCRIPTION P A RT N O .
R422 RES 390 OHM 5% 1W MO/MF 340X4391-633
U001 IC PWM UC3842AN 086X0257-001 R520 RES 1.8K OHM F 5% 1W M 2AQHM1050-182
U101 IC MC7805ACT REG 5V 2ARHI7805-001 R602 RES 2.2K OHM 5% 1W MF 2AQHM1050-222
U102 IC 3 PN REGULATOR 12V 1A 2ARHI7812-001 R603 RES 270 OHM 5% 3W MF 2AQHM3050-271
U301 IC 28 PIN MM 1203N MITSUM 2ARHI1203-002 R625 RES 15 OHM 5% 5W CEMENT 2AQPE5050-150
U401 IC 15 PIN TDA 1675A 2ARHI1675-001 TH001 NTC DSC 5D-11 5 OHM 2ARNT0511-509
U501 IC LA7850 H/V SYNC PROC S 086X0274-001 TH002 PTC D6-14MA/18MA 14 OHM 2ARPT0614-001
CRT CRT 13" SAMSUNG 088X0431-001
T R A N S F O R M E R S A34KQW42X01
D E S I G N AT I O N DESCRIPTION P A RT N O .
CRT CRT 19" ORION 088X0413-506
L001 CHOKE 0.7UHLTE-990053 2ASAC7414-079 A48JLL40X46 CQ
L601 COIL 1.3 MH 2ASVC0016-001
Component Differences between P819 and P859
L602 LINEARITY COIL 19" 009A3017-001
(SVC0017-002) P819 PCB RS 7200 REV A DEFL BRD (025A1523-001) 19"
L603 COIL 7 MH LTE-990055 2ASVC0018-001
T103 PWR TRANS E1-45LTE-99051 2ATSD1200-001 P859 PCB RS K7200 REV A DF BD (O251615-001) 13"
(PWR TRANS ER-4215 CORE)
T501 DRV TRANS E1-19V LTE-99052 2ATDA0001-001 P819
T601 PWR FBT MERITRON CT-8584 2ATFT1415-002 D E S I G N AT I O N DESCRIPTION PA RT N O .
WELLS-GARDNER • K7203
13” & 19” Standard Resolution:
15khz
Model K7203
VR601 VR802
TRAP R. DRIVE
VR801
VR602 R. CUTOFF
PINCUS.
VR803
G. CUTOFF
VR804
G. DRIVE
VR806
VR805 B. DRIVE
B. CUTOFF
VR001
B+ ADJ.
VR401
VR603 V-LIN
F.B. REG.
VR106
VR105 H-POS
H-SIZE
VR501
VR104 W-HOLD
V-SIZE
VR502
SHUTDOWN
VR103
V-POS
VR102
BLK LEVEL
VR101
CONTRAST
R E P L A C E M E N T PARTS LIST
Main, Neck & Control PCB Assembly Parts List
DIODES
D E S I G N AT I O N DESCRIPTION P A RT N O .
WELLS-GARDNER • K7300
13”&19” Standard Resolution: 15khz
Model K7300
Chassis Diagram
DIODES TRANSFORMERS
D E S I G N AT I O N D E S C R I P T I O N P A RT N O . Z500 D E S I G N AT I O N DESCRIPTION P A RT NO.
Z500 ZENER DIODE 12V 5% 1.0W 066X0040-050 T101 TFMR SMPS 053X0649-001
T700 TFMR FLBK 053X0761-001
Z601 ZENER DIODE 12V 5% 0.5W 066X0040-046
L701 COIL LINEARITY (25") 009A2813-018
Z701 ZENER DIODE 5.6V 5% 0.5W 066X0040-022
L701 COIL LINEARITY (27") (23") 009A2813-001
Z702 ZENER DIODE 13V 6.5% 1.0W 066X0040-017
L703 COIL PINCUSHION (25-27 ) 009A2970-002
Z804 ZENER DIODE 9.1V 5% 0.5W 066X0040-020 CORRECTION
Z802 ZENER DIODE 24V 3% 0.5W 066X0040-031 L703 COIL PINCUSHION (23") 009A2838-008
Z800 ZENER DIODE 75V 5% 0.5W 066X0040-048
D101, D102, DIODE 1N5406 066X0135-001 TRANSISTO R S
D103, D104 D E S I G N AT I O N DESCRIPTION P A RT NO.
D105 DIODE 1N4007 066X0095-001 Q502, Q506, TRSTR 2N3904 MOT 086X0113-501
D106A, D106B, DIODE 200V 3.5V BYV28-200 066X0097-001 Q507,Q508,
D106C Q601, Q700
D107 DIODE MUR490 066X0126-002 Q509, Q510, TRSTR 2N3906 MOT 086X0114-501
D108, D112, DIODE RU-2 1A 600V FAST R E C 066X0090-001 Q511
D113,D310, D301, Q800, Q802, TRSTR MPSA92 MOT 086X0133-501
D302, D303 Q803
D114, D603 DIODE 1N4001 066X0071-001 Q602 TRSTR 2SC2275 NEC 086X0176-001
D117 DIODE DAMP 066X0144-001 Q703 TRSTR 2SC2482 TOSH 086X0185-501
1A 600V GI R GP10J Q709 TRSTR 2N4403 086X0211-501
D501, D502, DIODE 1N914B 066X0070-001 Q704 TRSTR 2SC3686 086X0286-001
D503, D507 Q503, Q504, TRSTR NPN SANYO 086X0287-001
D504, D505, DIODE SANYO GMA02 066X0062-001 Q505 2SC3782
D506,D803, D807
Q101 TRSTR N-MOSFET 6N60 086X0334-001
D600, D601, DIODE 1N914B 066X0070-001
D602,D604, D700 Q710 TRSTR BDX53A SGS 086X0335-001
D702, D709, DIODE 1N914B 066X0070-001 NPN DAR
D711,D800, D804
D707 DIODE DD54RC SANYO 066X0150-001 POTENTIOMETERS
D708 DIODE MUR 460 066X0126-005 D E S I G N AT I O N DESCRIPTION P A RT NO.
D810 DIODE 1N4005 066X0075-001 R900 TRIM POT 5K OHM .15W 040X0714-007
VR901 TRIM POT 20K OHM .15W 040X0714-009
I N T E G R AT E D CIRCUITS VR903 TRIM POT 2K OHM .15W 040X0714-006
D E S I G N AT I O N DESCRIPTION P A RT NO.
VR905 TRIM POT 10K OHM .15W 040X0714-008
U101 IC PWM UC3842AN 086X0257-001 VR906 TRIM POT 50K OHM .15W 040X0714-010
U500 IC LM1203N RGB VID A M P 086X0270-001 VR907 TRIM POT 200K OHM .15W 040X0714-012
U601 IC VERT DEFL TDA1771 086X0326-001
U701 IC LA7850 H/V PROC SANYO 086X0274-001 MISCELLANEOUS
D E S I G N AT I O N DESCRIPTION P A RT NO.
U702 IC QUAD 2-INPUT X 086X0333-001
OR 2N74LS136 F101 FUSE 3.15A 5 X 20 016X0211-009
IEC/UL SLO BLOW
R760 RES 470 OHM 5% 043X0509-006
1W FP FAILSFE
C RT C RT 23 INCH 088X0452-001
C RT C RT 25 INCH 088X0415-506
C RT C RT 27 INCH 088X0420-506
R108 RES 0.33 OHM 5% 2W MF 420X5339-323
WELLS-GARDNER • K7400
23”, 25” and 27”Standard Resolution: 15khz
Model K7400
WELLS-GARDNER • K7500
25” and 27”Medium Resolution: 25khz
Model K7500
15Khz/ 25Khz
Model K7600
WELLS-GARDNER • K7600
39” Standard/Medium Resolution: 15Khz / 25Khz
Model K7600
BRIGHTNESS HEIGHT
(VR906) (VR907)
VERTICAL POSITION
HORIZONTAL POSITION (VR903)
Chassis Diagram (VR901)
WIDTH
(VR900)
B+ ADJUST
(VR101)
ADJUSTED AND
SEALED AT FACTORY
HORIZONTAL HOLD
(VR701)
FUSE (F101)
250V 3.15A FOCUS
SLO-BLOW (G4)
AC INPUT
CONNECTOR
(P101)
VERTICAL
SCREEN
HOLD
(G2)
(VR600)
TRAP
(VR771)
SUB. CONTRAST
(VR800)
PIN H.V. SHUTDOWN
(VR770) (VR700)
ADJUSTED AND
SEALED AT FACTORY
PIN 1
SIGNAL INPUT
CONNECTOR (P200)
DEFLECTION PCB
WELLS-GARDNER • U3000
14”, 17” 19”, 27” & 33”
VGA Resolution: 31.5Khz
Model U3000
Chassis Diagram
I N P U T S I G N A L C O N N E C T OR: P301
PCB Connector Optional Cable Connector
A C I N P U T C O N N E C T OR: CN101 Amp type 1-640445-0 Amp type 748364-1 (DB15)
PCB Connector Mating Amp type 1-640251-0 Mating Amp type 748565-1
Amp type 640445-5 Pin Description Pin Description
Mating Amp type 640251-5 1 Horizontal sync 1 Red video
2 Vertical sync 2 Green video
Pin Description 3 Sync ground
4 Shield ground 3 Blue video
1 AC hot 5 Blue return 4 N/A
2 N/A 6 Green return 5 N/A
3 AC neutral 7 Red return
8 Blue video 6 Red return
4 N/A 9 Green video
5 Ground 7 Green return
10 Red video 8 Blue return
9 N/A
10 Mode select
11 Sync return
12 N/A
13 Horizontal sync
14 Vertical sync
15 Shield ground
R E P L A C E M E N T PARTS LIST
Main, Neck & Control PCB Assembly Parts List
DIODES
D E S I G N AT I O N DESCRIPTION P A RT N O .
I N T E G R ATED CIRCUITS
D E S I G N AT I O N DESCRIPTION P A RT N O .
T R A N S F O R M E R S
D E S I G N AT I O N DESCRIPTION P A RT N O .
TRANSISTO R S
D E S I G N AT I O N DESCRIPTION P A RT N O .
VARIABLE POTENTIOMETERS
D E S I G N AT I O N DESCRIPTION P A RT N O .
MISCELLANEOUS
D E S I G N AT I O N DESCRIPTION P A RT N O .
WELLS-GARDNER • U3000
33” Standard Resolution: 15Khz
Model U3000
I N P U T S I G N A L C O N N E C T OR: P301
A C I N P U T C O N N E C T OR: CN101 PCB Connector Optional Cable Connector
PCB Connector Amp type 1-640445-0 Amp type 748364-1 (DB15)
Amp type 640445-5 Mating Amp type 1-640251-0 Mating Amp type 748565-1
Mating Amp type 640251-5
Pin Description Pin Description
Pin Description 1 Red video
1 Horizontal sync
2 Green video
1 AC hot 2 Vertical sync
3 Blue video
2 N/A 3 Sync ground
4 N/A
3 AC neutral 4 Shield ground
5 N/A
4 N/A 5 Blue return
6 Red return
5 Ground 6 Green return
7 Green return
7 Red return
8 Blue return
8 Blue video
9 N/A
9 Green video
10 Mode select
10 Red video
11 Sync return
12 N/A
13 Horizontal sync
14 Vertical sync
15 Shield ground
DIODES
D E S I G N AT I O N DESCRIPTION P A RT N O .
I N T E G R ATED CIRCUITS
D E S I G N AT I O N DESCRIPTION P A RT N O .
T R A N S F O R M E R S
D E S I G N AT I O N DESCRIPTION P A RT N O .
TRANSISTO R S
D E S I G N AT I O N DESCRIPTION P A RT N O .
VARIABLE POTENTIOMETERS
D E S I G N AT I O N DESCRIPTION P A RT N O .
MISCELLANEOUS
D E S I G N AT I O N DESCRIPTION P A RT N O .
WELLS-GARDNER • U3000
33” Medium Resolution: 25Khz
Model U3000
Chassis Diagram
R E P L A C E M E N T PA R T S L I S T
Main, Neck, Control PCB Assembly Parts List
DIODES TRANSISTO R S
D E S I G N AT I O N DESCRIPTION P A RT N O . D E S I G N AT I O N DESCRIPTION P A RT N O .
D1, D403, D404, DIODE 1N4148 066X0099-001 Q301 TRANSISTOR 2SC458C 8-100X-005-91
D701A, D801, D802, Q307, Q310, Q313 TRANSISTOR 2SB716A 8-100X-008-91
D804, D805 Q302, Q303, Q304 TRSTR 2N2369, MOT 086X0157-001
D301 D302, DIODE 1N4148 066X0099-001 Q306, Q309, Q312 TRANSISTOR 2S756A 8-100X-014-91
D303, D507, D508 Q305, Q308, Q311 TRANSISTOR 2SC3788 8-110X-013-11
D402 DIODE 1N4003 8-100D-010-81 Q1 TRSTR 2N3904 MOT 086X0113-501
D604, D606, DIODE 1N4942, 8-100D-011-81 Q2 TRSTR 2N3906 MOT 086X0114-501
D701, D803 1A, 200V, BYT52 Q3 TRSTR 2SD525R 086X0074-001
D807 DIODE 10DF4, 1A, 400V 8-100D-015-41 Q601 TRSTR N-MOSFET 6N60 086X0334-001
D601, D602, D603 DIODE HER103, 1A, 200V 8-100D-012-81 Q602 TRSTR 2SB857C/TIP 127 8-100X-011-11
D2 DIODE DD54RC SANYO 066X0150-001 Q603, Q803 TRSTR 2SC1921C 8-100X-101-91
D610, D611, D806 DIODE HER204 8-100D-003-41 Q701 TRSTR 2SA1015GR 8-100X-002-11
D3 DIODE MUR460 8-100D-025-11 Q702 TRSTR 2SC458C 8-100X-005-11
D607, D608, D609 DIODE HER308, 3A, 8-100D-004-41 Q703, Q805 TRSTR 2SC1213C 8-100X-004-11
1KV, BYT56M Q704 TRSTR 2SD667AC 8-100X-007-91
ZD401A DIODE ZENER 2.4V 8-100D-002-81 Q705 TRSTR 2SC4123 8-100X-003-11
D602 DIODE RS405, 4A, 8-100D-006-41 Q804 TRSTR 2SB649AC 8-100X-006-11
600V, KBL06-G
VARIABLE POTENTIOMETERS
ZD402, ZD403 DIODE ZENER 5.1V, 066X0040-028 D E S I G N AT I O N DESCRIPTION P A RT N O .
5%, 0.5W
VR603 VR, 1K OHM 1-121R-024-11
ZD701 DIODE ZENER HZ6C2, 8-100D-008-81
VR2 VR, 5K OHM 1-212R-023-11
6.2V, 0.5W
VR200, VR700 VR, 10K OHM 1-221R-008-11
ZD801, ZD301 DIODE ZENER 8-100D-009-81
VR201 VR, 20K OHM 1-221R-025-11
HZQA2, (8V2)
VR601 VR, 100K OHM 1-221R-007-11
I N T E G R AT E D CIRCUITS
D E S I G N AT I O N DESCRIPTION P A RT N O . MISCELLANEOUS
D E S I G N AT I O N DESCRIPTION P A RT N O .
IC401, IC702 IC 74LS123 DUAL MONO 086X0338-001
R604 RES .33 OHM 5%, 043X0477-008
IC402 TTL TDA1675A 086X0360-001
1W, WW
IC403 IC L4051 BCP 8-100S-002-11
R601 CEMENT RES 1-218R-017-11
IC602 TTL IC7805, 5V, 1A 8-100S-011-11
4.7 OHM 7W
IC701 IC 74LS86, EXCL-OR 086X0313-001
F601 FUSE 3.15A 5X20 IEC/UL 016X0211-009
IC703 IC LA7850 H/V SYNC 086X0274-001
SLO-BLO
PROC SANYO
CRT CRT 14 INCH, 088X0379-001
IC501 IC PWM, UC3842AN 086X0257-001
M34KXG30X55
IC201 IC LM1203N, RGB, 086X0270-001
CRT CRT 19 INCH, 088X0290-506
VID, AMP, NSC
A48ACB24X
TRANSFORMERS
D E S I G N AT I O N DESCRIPTION P A RT N O .
WELLS-GARDNER • U3100
14” & 19” VGA Resolution: 31.5Khz
Model U3100
VR306
B. BIAS VR305
G. BIAS VR302
VR304 R. DRIVE
R. BIAS VR303
0 B. DRIVE
70 Y
VR ELA 60
1 3
D VR SIZE 60 T
H .
. VR EN SIGNAL INPUT
V C
V. CONNECTOR
1
20 T 2
VR IGH VR IZE
BR S
H.
CONTROL
0 PCB
20
VR ONT
C S
CU
FO
EN
RE
SC
J.
1 AD
3G
80
VR
CABLE VIDEO
CONNECTOR
(P601)
4 .
70 DJ ) AC INPUT
1 VR Y A WN CONNECTION
40 . RA DO
VR . LIN .
X UT W J.
V (SH 2 P , AD
VR SH
C U ID
1 . PIN ZO
70 EQ PA
VR . FR T RA DJ.
I Z J . R3 A
H OR AD V
DEFLECTION PCB
See Locations and Contacts on Page 1 WELLS-GARDNER • CRT CROSS REFRENCE GUIDE 133
Wells-Gardner Monitors
WELLS-GARDNER • CRT CROSS REFRENCE GUIDE
Features:
• Tests MDA, CGA, EGA, VGA 3, SVGA, 8514/A and
high resolution monitors
• Multiple test patterns: color bars, crosshatch, dots,
color raster (white, red, green, blue) and windows
• Two video connectors: digital/TTL 9-D and
analog 15-HD
• Powered by a 9v battery (included) or an external
AC adapter
• Dimensions: 1.5” x 3.8” x 5.7”
• Weight: less than 1lbs.
G e n i e - O n e K i t I n c l u d e s:
•Analog 15-HD Connector
•9 Volt Battery
•Digital TTL 9-D Cable
This kit will upgrade the U5000 monitor to operate in medium resolution
only (25KHz). CRT must be properly functioning.
Contains:
Deflection Board (Chassis Board)
Yoke
Neck Board
SARS Transistor & Heatsink Assembly
SCR SWG 10-24 x 3/8 HWH
Instructions
PART NO.S07J-0000-000F
Contains:
PART NO.S30J1930-C30C
Contains:
APPLICATION
FOR
CREDIT
The undersigned, an authorized representative of the Applicant, agrees to comply with the Terms and Conditions of Sale as printed on the American Gaming &
Electronics, Inc. Invoice.
Forchip/Logical Device
Fluke
CAPACITORS SWITCHES, RELAYS HAND TOOLS
(Radial, Axial, Hi-Temp, Ceramic, Mylar, Etc.) (Poker Button, Drop Door, Bill Validator Door, Etc.) (Crimpers, Strippers, Pliers, Cutters, Screwdrivers,
Measuring Tapes, Etc.)
NTE CRL Components AMP Potter Brumfield
Nichicon CDE Cherry Burgess AMP Bondus
Philips Components Waldom Microswitch Ideal Waldom
Omron Crydom Aven Xcelite
Wiha Molex
Sargent
ORDER FORM
Order Form
CHICAGO FLORIDA
9500 W. 55th St., Suite A 2046 McKinley St., Unit A-1
McCook, IL 60525 Hollywood, FL 33020
(708) 290-2100 (954) 922-9952
Fax (708) 290-2200 Fax (954) 922-1855
1-800-336-6630
Bill To: ______________________________________________________ Date:_______________
______________________________________________________ _______________
Ship To: _____________________________________________________ Your P.O. No.
____________________________________________________ Terms:______________
F.O.B. McCook,IL
AG&E Customer #: ________ Phone: ___________ Fax: _____________ ______________
Sales Tax Number
Include Copy of Tax Certificate
Card Holder If you do not have an account with American Gaming & Electronics Inc.,
please complete the Credit Application form. Credit card orders require
Signature____________________________________ card holder’s signature.
Ordering Instructions
INDEX
A BASEBOARD STRIPPER: 19 CEMENT ADHESIVES: 5, 6
CARD READER: 70
BALLY SLANT TOP SHOCK: 69 CORROSION PREVENTATIVE: 21
CAUTION TAPE: 62
BAR CODE SYMBOLOGY CARDS: 83 COTTON TIP APPLICATORS: 2
INDEX
JCM DBV-200 VIEW: 79 MANUAL REPAIR TOOL FOR MTA-: 97 PCB: 26
RESISTORS 1/4 WATT METAL : 58 SILVER PRINT CONDUCTIVE PAINT: 9 TICKET PRINTER - MODEL 850 : 75
RESISTORS 2 WATT METAL : 60 SINGLE FACE FOAM TAPE: 62 TICKET PRINTER - MODEL 860: 76
INDEX
WELLS-GARDNER D9100: 106, 107
WELLS-GARDNER K7500
REPLACEMENT KIT: 136
WET NAPS: 4
WIPES: 4
WIRE SPLICE: 50
X
XCELITE: 99
American Gaming & Electronics is committed to serving the gaming industry with quality
products, competitive prices and excellent service. Our quick service is supported by our
offices in Las Vegas, Nevada; Atlantic City, New Jersey; Hollywood, Florida; and Chicago,
Illinois.
Our customers are American Gaming & Electronics' most valuable assets. American Gaming
& Electronics will do everything within our ability to protect our most valuable asset.
All of us at American Gaming & Electronics truly appreciate your business and continued sup-
port.
If you are not satisfied with any experience in dealing with American Gaming & Electronics,
please do not hesitate to contact me directly.
Robert McMonigle,
President
American Gaming & Electronics, Inc. makes no representations and warranties, express or implied, as to the
accuracy or completeness of the information or content in this book.
ALL LIABILITY WITH RESPECT TO THE PRODUCTS WILL BE LIMITED TO REPLACEMENT OF A DEFEC-
TIVE PRODUCT, AND IN NO EVENT WILL THE AGGREGATE LIABILITY OF AMERICAN GAMING & ELEC-
TRONICS, INC. AND ITS REPRESENTATIVES FOR ANY DAMAGES, LOSSES OR CLAIMS, WHETHER
DIRECT OR INDIRECT WHETHER IN CONTRACT, TORT, OR OTHERWISE, EXCEED THE TOTAL
AMOUNT BUYER HAS PAID TO AMERICAN GAMING & ELECTRONICS, INC. RELATING TO THE SALE
OF THE PRODUCTS.