Professional Documents
Culture Documents
HS 1220
1. Identification
Water based polymer for heat seal lacquers in industrial application.
Company:
PT. PURA NUSA PERSADA
HOLO PERDANA Division
Jl. Lukmonohadi 25/44
Kudus
INDONESIA
Telephone: +62-291 440474
2. Hazards Identification
Label elements
The product does not require a hazard warning label in accordance with GHS criteria.
4. First-Aid Measures
Description of first aid measures
General advice:
Remove contaminated clothing.
If inhaled:
Remove the affected individual into fresh air and keep the person calm. Seek medical attention.
If on skin:
Wash thoroughly with soap and water. If irritation develops, seek medical attention.
If in eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open. If irritation
develops, seek medical attention.
If swallowed:
Rinse mouth and then drink plenty of water. Do not induce vomiting. Seek medical attention if
necessary.
5. Fire-Fighting Measures
Flash Point : Greater than 100 C degree
Flash Point Method : TCC
Extingusihing Media : water spray or fog, dry powder, foam
Environmental precautions
Do not discharge into drains/surface waters/groundwater.
Storage Requirements
Store in a cool, dry place. Keep container closed when not in use. Keep from freezing
.
Engineering Controls :
Use adequate ventilation
Respiratory protection:
Wear respiratory protection if ventilation is inadequate. Respiratory protection in case of
vapour/aerosol release. Wear a NIOSH-certified (or equivalent) organic vapour/particulate respirator.
Observe OSHA regulations for respirator use (29 CFR 1910.134).
Hand protection:
Chemical resistant protective gloves
Eye protection:
Safety glasses with side-shields. Wear face shield if splashing hazard exists.
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Conditions to avoid
None if used for intended purpose.
Incompatible materials
strong oxidizing agents
Decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated.
Thermal decomposition:
No decomposition if stored and handled as prescribed/indicated.
11. Toxicological information
Acute oral toxicity Not classified as hazardous for acute oral toxicity according to GHS.
According to the data on the components
According to the classification criteria for mixtures.
Acute inhalation toxicity Not classified as hazardous for acute inhalation toxicity according to
GHS.
According to the data on the components
According to the classification criteria for mixtures.
Acute dermal toxicity Not classified as hazardous for acute dermal toxicity according to
GHS.
According to the data on the components
According to the classification criteria for mixtures.
Acute toxicity (other routes of no data available
administration)
Skin corrosion/irritation
Not classified as irritating to skin
According to the data on the components
According to the classification criteria for mixtures.
Serious eye damage/eye irritation
No eye irritation
According to the data on the components
According to the classification criteria for mixtures.
Toxicity
Aquatic toxicity
Assessment of aquatic toxicity:
The product has not been tested. The statement has been derived from the properties of the
individual components.
Toxicity to microorganisms
EC0: > 10 - 100 mg/l
The product has not been tested. The statement has been derived from the properties of the
individual components.
Persistence and degradability
Container disposal:
Recommend crushing, puncturing or other means to prevent unauthorized use of used containers.
Dispose of in accordance with national, state and local regulations.
Sea transport
Not classified as a dangerous good under transport regulations
Air transport
Not classified as a dangerous good under transport regulations
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information, and belief at
the date of its publication. Such information is only given as a guidance to help the user handle, use, process, store,
transport, dispose, and release the product in satisfactory safety conditions and is not to be considered as a warranty
or quality specification. It should be used in conjunction with technical sheets but do not replace them. Thus, the
information only relates to the designated specific product and may not be applicable if such product is used in
combination with other materials or in any other manufacturing process, unless otherwise specifically indicated. It does
not release the user from ensuring he is in conformity with all regulations linked to its activity.