You are on page 1of 3

AR32.25-P-0110NKB Remove/install rear shock absorber 24.9.

13

MODEL 117, 156, 176, 242, 246

Shown on MODEL 242

17 Cover

P35.20-2298-05

1 Spring control arm


2 Shock absorber
3 Screw

P32.25-2271-03

Shown on MODEL 246 with CODE 537


(Digital radio (DAB))

4a Stowage compartment
4b Stowage compartment
5 Control unit bracket
6a Nuts
6b Nuts

P32.25-2270-05
© Daimler AG, 12/30/21, G/03/14, ar32.25-p-0110nkb, Remove/install rear shock absorber Page 1 of 3
MODEL 117, 156, 176, 242, 246
P32.25-2312-08

MODEL 117

6a Nuts 7 Expansion rivets


6b Nuts

Danger ! Risk of death caused by vehicle slipping or Align vehicle between vehicle lift columns AS00.00-Z-0010-01A
toppling off of the lifting platform. and position the four support plates at the
vehicle lift support points specified by the
vehicle manufacturer.
Notes on self-locking nuts and bolts AH00.00-N-0001-01A
Notes on repair work on suspension AH00.00-P-0100-01A
components
Remove/install
1 Secure vehicle on vehicle lift AR00.60-P-0100CW
2 Remove left or right rear wheel
AP40.10-P-4050AK
3 Remove left or right rear wheel well liner AR88.10-P-1400NKB
4 Unclip and remove cover (17) Installation: Check for correct seating of
the cover (17).
5 Support spring control arm (1) with Transmission platform gotis://A_25/35/49_02.0
transmission jack and transmission plate
Transmission jack gotis://H_00.10_01.0
6 Unscrew nut of shock absorber (2) from Nut, shock absorber to spring control *BA32.25-P-1003-03J
spring control arm (1) and remove bolt (3) arm
7 Lower transmission jack and transmission
plate and remove from vehicle
8 Lower vehicle Only lower the vehicle until the trunk is
accessible.
9.1 Open stowage compartment (4a) MODEL 156, 176, 242, 246Left side of
vehicle
9.2 Open stowage compartment (4b) MODEL 176, 242, 246Right side of vehicle
9.3 Remove expansion rivet (7) and loosen left or MODEL 117
right luggage compartment lining in the upper
section and fold downwards (arrow)
9.4 Remove C-pillar paneling MODEL 156Right side of vehicle
AR68.30-P-4490NKX
10 Detach control unit bracket (5) and place to MODEL 156, 176, 242, 246
one side with CODE 536 (SIRIUS satellite radio)
with CODE 537 (Digital radio)
11 Pull luggage compartment lining on the right MODEL 156
to the side until the nuts (6a or 6b) are Right side of vehicle
accessible
12 Remove nuts (6a or 6b) connecting shock Nut, shock absorber to body *BA32.25-P-1002-03J
absorber (2) to body
13 Push shock absorber (2) together and
remove
Check
14 Check shock absorber (2) AR32.25-P-0121CW
© Daimler AG, 12/30/21, G/03/14, ar32.25-p-0110nkb, Remove/install rear shock absorber Page 2 of 3
MODEL 117, 156, 176, 242, 246
Dispose of shock absorber (2) properly.
15 Install in the reverse order

Rear axle shock absorber

Number Designation MODEL 117 MODEL 156


BA32.25-P-1002-03J Nut, shock absorber to body Nm 50 50

Rear axle shock absorber

Number Designation MODEL 242 MODEL 176, 246


BA32.25-P-1002-03J Nut, shock absorber to body Nm 50 50

Rear axle shock absorber

Number Designation MODEL 117 MODEL 156


BA32.25-P-1003-03J Nut, shock absorber to spring control arm Nm 50 50

Rear axle shock absorber

Number Designation MODEL 242 MODEL 176, 246


BA32.25-P-1003-03J Nut, shock absorber to spring control arm Nm 50 50

© Daimler AG, 12/30/21, G/03/14, ar32.25-p-0110nkb, Remove/install rear shock absorber Page 3 of 3
MODEL 117, 156, 176, 242, 246

You might also like