Professional Documents
Culture Documents
www.conveyorpro.com.au
CONVEYORPRO
EVERYTHING
CONVEYORS
TROUGHING HEAD/DRIVE
IDLER PULLEY
BELT
IMPACT IDLER
TAIL LY
PULLEY BED ASSEMB
IMPACT
1
HARD WEARING.
HIGH QUALITY.
RELIABLE.
ConveyorPro is a global supplier
of high quality conveyor belt, with
widths ranging from 300mm to 4m. All
our conveyor belt is laboratory tested,
assuring our customers, our conveyor
belt is not only compliant but will
exceed both life cycle and budget
expectations.
BELT TYPES
Steel cord
Multiply fabric
Bucket elevator
Corrugated side wall
Fire resistant
Chevron
Rip stop
Heat resistant
Chemical resistant
2
CONVEYOR EP BELT
3
4
CONVEYOR ST BELT
BELT SPLICE
DIAMETER OF THE
DRIVE PULLEY, AT
10% OF MINIMUM
MINIMUM COVER
CORD DIAMETER
WEIGHT OF BELT
ELONGATION AT
RATED BREAK
NO. OF STEPS
CORD PITCH
REFERENCE
LENGTH Iv1
STRENGTH
STRENGTH
BREAKING
GAUGE
CORE4
LEAST
N/mm
mm
mm
mm
%
TYPE
ST 500 500 2.8 14 500 1 5.3 4
400 50
ST 630 630 2.8 11 550 1 6.1 4
ST 800 800 3.2 12 600 1 6.9 4
ST 1000 1000 3.7 12 600 1 8.4 4
ST 1120 1120 3.7 11 650 1 500 630 8.8 4
ST 1250 1250 4.5 14 650 1 10.3 4
ST 1400 1400 4.5 14 1000 2 0.1-0.3 10.3 4
ST 1600 1600 5.1 15 750 1 11.9 4
ST 1800 1800 5.1 13.5 1150 2 12.5 4
650 800
ST 2000 2000 5.1 12 1150 2 13.3 4
ST 2250 2250 5.1 11 1150 2 13.7 4
ST 2500 2500 6.7 15 1350 2 19.1 5
1000
ST 2800 2800 6.7 13.5 1450 2 20.3 5
ST 3150 3150 7.6 15 1650 2 800 21.0 5.5
ST 3500 3500 8.1 15 2350 3 1250 23.1 6
ST 4000 4000 8.7 15 2650 3 25.9 6.5
ST 4500 4500 9.3 16 2800 3 1400 29.0 7
ST 5000 5000 10.4 17 4050 4 1000 31.2 7.5
ST 5400 5400 10.8 17 4450 4 1600 32.9 8
0.15-0.3
ST 6000 6000 10.8 16.5 2 2
34.3 8
ST 6300 6300 12.3 20 2 2
1800 36.7 9
1200
ST 6600 6600 12.3 19 2 2
2000 38.1 10
ST 7100 7100 13.2 20 2 2
2250 42.3 10
ST 7500 7500 13.2 19 2 2 2
2500 42.3 10
ST 10000 10000 14.1 19.2 2 2 2 2
20 10
BREAKING ELONGATION
ABRASION STRENGTH AT BREAK
GRADE STANDARD mm3 max N/mm3 min % min
W DIN22102 90 18 400
X DIN22102 120 25 450
Y DIN22102 150 20 400
Z DIN22102 250 15 350
V DIN22102 200 15 350
H ISO15236 120 24 450
D ISO15236 100 18 400
L ISO15236 200 15 350
K ISO15236 200 15 350
A AS1332 70 17 400
E AS1332 - 14 300
F AS1332 - 14 300
M AS1332 125 24 450
N AS1332 200 17 400
S AS1332 250 14 300
I RMA - 17 400
II RMA - 14 400
1 ARPM 125 17 400
2 APRM 175 14 400
6
FRAS BELT
MINIMUM MINIMUM
TENSILE ELONGATION
STANDARDS STRENGTH (%) ABRASION
DIN S Grade 17 350 180
DIN K Grade 17 400 200
7
TRANSMIN SPECIALISED BELT
PROTOUGH BELT
PROEDGE BELT
HIGH STRENGTH,
ALL-IN-ONE EDGE STRIP
SOLUTION
MIN PULLEY
DIAMETER WEIGHT
TYPE H Sw Tw P mm kg/m
S* 40 35 30 30 125 0.60
60 50 45 40 160 1.80
80 50 45 40 200 1.80
120 50 45 40 250 2.23
HDSR 120 75 70 60 315 2.67
160 75 70 60 400 4.77
200 75 70 60 500 6.48
250 75 70 60 630 7.55
280 75 70 60 800 8.60
300 75 70 60 800 9.30
XHDSR 300 100 90 75 800 12.50
400 100 90 75 1000 18.75
9
SIDEWALL BELT
10 The above are standard heights. Non-standard heights are available on request.
STEEP ANGLE COVER MIN PULLEY
CONVEYING NEEDS BASE BELT STRENGTH THICKNESS WEIGHT DIAMETER
TYPE N/mm mm kg/m mm
The ConveyorPro sidewall range of cross- Type XE 250/2 2:2 9.40 200
stabilised base belts are available in the 400/3 4:2 13.50 315
following configurations:
500/3 4:2 13.75 400
630/4 4:2 15.20 500
Type XE
This belt incorporates the cross- 800/5 4:2 16.85 630
stabilising ply in the tensioning Type XE+2 400/3+2 4:2 12.10 315
ply, mainly used for medium duty 500/3+2 4:2 12.60 400
applications.
630/4+2 4:2 14.40 500
Type XE+2 800/5+2 4:2 16.10 630
The cross-stabilising ply and tensioning
1000/5+2 4:2 17.80 800
plies are separate. In this case the belt
has 2 cross-stabilising piles, application 1250/5+2 4:2 18.25 1000
areas are medium to heavy. Type XE- 315/2+2 4:2 13.70 315
Type XE-SC+2 SC+2 400/3+2 4:2 14.50 315
This belt incorporates textile tensioning 500/3+2 4:2 15.20 400
plies with steel cord cross-stabilising 630/4+2 4:2 16.70 500
members. The high lateral stiffness
means the belt can be used in 800/5+2 4:2 18.00 630
application areas where rigidity is an 1000/5+2 4:2 19.50 800
important factor, ie. high lifts heights 1250/5+2 4:2 21.40 1000
and wide belts. Type XST- 1600 8:8 1250
Type XST+SC SC* 2000 8:8 1250
This belt incorporates steelcord
2500 8:8 1400
tensioning with steelcord cross- Please enquire
stabilising members. High tensile 3150 8:8 1400
strengths can be achieved making 3500 8:8 1600
the belt ideal for high vertical lift 4500 8:8 1600
applications.
Belt weight will be decided by the final belt design which is dependant on the application. The above are
BELT COMPOSITION standard heights, non-standard are available on request, please enquire.
X= Cross-stabilised construction.
E= Polyester Tension+2 = Number of
separate cross stabilising plies.
SC= Steel cord cross-stabilised.
XST-SC= Steel cord.
COVER THICKNESS
Above are standard constructions. Belts
can be supplied with non-standard covers
on request.
BELT STRENGTH
Above are standard items. Other requests
are available on special order.
Note:
Pulley diameters shown are for normal quality,
and standard cover thickness. Please enquire for
recommended diameters on belts with special
quality covers or different tensile ratings as these
may require larger diameters.
11
SPECIALTY BELTS
12
BUCKET ELEVATOR HEAT RESISTANT
BELT CONVEYOR BELT TUBE BELT
Fitted with the buckets themselves (also Adopting either an SBBR or EPDM belt Presenting all the advantages of
available from Transmin), are used to layer, a special high temperature resistant conventional belt conveyors while also
convey material from horizontal to vertical canvas as the carcass material, which providing the benefits of a fully enclosed
and is widely used in construction, solves the issue of fabric shrinkage system, allowing for inclined conveying
quarrying, agriculture and other light and deformation problems under high up to 30°. A more flexible system able
industry. temperature environments, but also to negotiate tight curves and limited
crucially avoiding the problem of rubber space with no requirement for transfer
Due to their carcass construction they are saturation and poor adhesion. construction points. Enclosed tube
known for their high wear-rate and have a conveyor system also provides protection
proven long service life. FEATURES from the weather or conversely protection
for the environment if the materials
Transmin has been engineering and Maximum heat and fire resistance, long conveyed are hazardous.
fabricating complete bucket elevators for service life.
over 30 years. FEATURES
Belt selection relies on material
temperature, surface figure, viscosity
FEATURES Fully enclosed system, compact
and other data.
flexible design, protection from the
High tensile strength (315 N/mm up elements and/or protection for the
to 6300 N/mm), impact resistant, low TYPICAL APPLICATIONS
surrounding environment.
elongation and good flexibility.
Used in industries where material
carried is high temperature, fire TYPICAL APPLICATIONS
TYPICAL APPLICATIONS
prevalent between 70-400°.
Suitable for heavy-duty, long distance,
Bucket elevators. Coal mining, cement, metal powder high speed material handling.
Mining and materials handling, and sintered.
Cement, power stations, waste
quarrying, utilities, agriculture.
processing and chemical industry.
13
IMPACT TABLE/BEDS
BELT CLEANERS
15
IDLERS & ROLLERS 3 Roll Inline Trough Idlers
IN
AFT G D
um
ES
LLERDIAM IGN
xim
3R
Belt
AT
DIA ETER ION
Spe
ed
oll
4.5
Off
set
Tro
ug h Id
lers
178mm or 194mm** MET : 25 : 62 m/s
ER mm 04*
: 10
2m
m or
114m
m or
12 7m
m**
B+4
4
E
D
2 SLO
A FOR TS Ø16
M12
BOL x 25
TS
6 LEA 35
D
57
F
ConveyorPro supplies a wide range
IDLER SETS MASSES
400 A
TYPES OF ROLLERS
UNIT MASSES
20º IDL
30º 35º 450 154 B 20º ER
45º DIM
C
BW A PLAIN 500 IMPACT C EN
B C D C 172 650 MASS 1 ROLL SIO
D C D C FRAME NS
D E F MRP TOTAL600MRP 189 D
750 284 1000 360 886 TOTAL 700 ONLY 231 PLAIN IMPACT 30º (mm)
407 833 427 801 650 224
800 466 726 140 257 750 237 498 C
300 1050 376 932 27.4 49.4 — 244 —
426 877 448 843 750 850 12.9 243 12.2 550 — 256 D BEL
489 765 35º
Documen
900 337 1150 389 150 268 28.5 52.8 T TRA
Contve
389 1300 413 274 32.8 64.0
100
Tiyo
1189 476 1120 505 331
— 105
— 274
20.5 757
14.5
0 —291 C
tlerP
1200 1078 558 980 165 0 531 276 412
442 1450 274 34.5 10566.9 358—
, 40
442 1341 514 1265 115— 279
21.1 855 301
546 0 0 15.3 626 D
& IDLERS
1218 606 1108 180 — 286 459 289
roptRW
1350 494 1650 459 285 38.1 120 77.1 383 — 125 — IDL
1491 540 1407 576 0 0 292
26.7 901
16.8 318 681 306 ER
1355 643 1233 180 — 504 302 386 E SE
anhigte
1400 500 1700 470 285 41.6 84.0 436 — 1300 — 30129.0 100 TS
1508 551 1423 587 18.3 326— 774 317 596 MA
1371 655 1248 200
8 314 429 56 F PLAIN SS
1500 547 293 42.0 145
1800 486 93.1 — 0 — 309 37.6 108618.5 344 — ES
e
1495 688 1361 200 470 56 176 P
1600 567 2000 510 1701 602 1606 eyor
644 mac
293 * 45.2
For 101.4 — —
328 115
39.4 8 20.7 358 — 919 346 739 353 555 TO IMPA
1800 631 2200
1548
hine
720 1410
ry, 240
equi 311 46.5beari119.6 131 370
56 176 6.6 TAL
CT UN
Sub Headin
532 1885 — 993 367 781 IT MA
240 pme
634 1781 680 ** De ng — 55.7 0 21.3 377 603 56 176 MR
2000 706 2400 579
1716 766 1564 311 nt, parts, rat
pend 129.4 ing —
50.8 397
—
106 383 879
7.2 16.
4 P SS
g, 17pt Wh
TO
2101 693 1986 744 1914 840 1745 280 55.9 ing servicing
s ref — 59.7 23.3 — 1 388 685 56 176 7.7 17. — TAL FRAM
ES
2200 785 2600 606 332 on
161.8 — er to— and engineer 120 397 950 415 4
ON E MASS
ite
2329 724
732 2202 790 2123 896 belt pa
81.9 26.6 — 6 56 176 8.7 18. — — LY
2400 846 2800 667 2504 803 2369 865 2284
1936 280 332 61.2 187.4 wid
—
th (BW— ge 31 87.5 33.3 — ing - all unde
428 101
6 434 813 56 176 9.3 20.
4
—
PLAIN
1 RO
LL
2500 871 3000 675 2576
979 2083 350 372 —
. 115
6 451 r one roof.
878 56 176 10.
5 — 7.1
IMPA
standards.
9
** Depending on belt width (BW) — — 13. 5.4 —
refer to page 19. 7
— 14. 5.8 —
2
15. 6.1 —
6
Carrying rollers
36 6.8 —
—
60
ConveyorPro partners with leading ConveyorPro has pulleys to suit all bulk material application or selected from
pulley and lagging manufacturers, applications and covers the entire range our standard pre-engineered range. The
worldwide, with the view to provide of requirements. shells are normally made from heavy wall
our customers with the most cost pipe but can also be rolled to suit specific
effective and quality products, ensuring TYPES OF PULLEYS requirements. Stainless steel pulleys are
maximum life and minimal downtime. also available.
Our range means we can supply you
with any type of pulley and lagging. Drive/head pulleys Our recommended method for shaft-
Idler pulleys to-end disc fitting is by internal locking
ConveyorPro’s experienced service team elements which provide a demountable
can repair your existing pulleys, saving Return/tail pulleys key-less high torque connection. The easy
you time and money, as well as install Stub pulleys release capability permits the removal of
your new pulleys. We can supply you with Take-up pulleys the shell from the shaft for maintenance.
any type of repair kit or tooling you need Other types of shaft connections are
to maintain and repair your conveying Bend pulleys available and these include compression
systems ensuring smooth running ConveyorPro pulleys can be engineered hub, taper fit, or welded shaft for the less
operations. and constructed to suit your specific critical applications.
16
ENQUIRY FORM
TROUGHED CONVEYOR BELT
Name Phone
Equip
Email
ID
Company Site
Discharge
Centre distance
Feed L
L4
L3
L0 L2
H3
MATERIAL HANDLED L1 H2
Designation
Temperature interval °C
Humidity %
Max. lump size mm
Lump size distribution %
Bulk density kg/m³
Chemically corrosive? Yes No
Oil? Yes No
MASS FLOW
3/3 3/3
Proposed Site Visit
Capacity t/h
Hours per day operation hrs
Special Comments
18
ENQUIRY FORM
SIDEWALL BELT
Name
Company
Phone
Equip ID
Site
MATERIAL HANDLED
Designation
Temperature interval °C Proposed Site Visit
Humidity %
Special Comments
Max. lump size mm
Lump size distribution %
Bulk density kg/m³
Chemically corrosive? Yes No
Oil? Yes No
MASS FLOW
Capacity t/h
Hours per day operation hrs
Days per year operation days
Belt speed m/s
BELT DIMENSIONS
A m
B m
C m
D m
E m
F m
G m
Belt length m
19
SYSTEM DIMENSIONS CONVEYORPRO SIDEWALL BLINKERS
H m N m Side blinkers can be fitted
inbetween the cross cleats
I m α ° profile and the sidewall to
make a seal. Side blikners
L m ß1 °
are used whe n the material
M m ß2 m is particularly free flowing.
CLEAT OPTIONS
Type Tk
Used as a drag-oout cleats
CONVEYOR CONFIGURATIONS
Type MBT
Separate moulded base, cleat
blade can be of rubber or PU
and of any height
Type C
Type MBTC
Separate moulded base, cleat
blade can be of rubber or PU
and of any height
Type T
Type T-XS
The cleat base is a moulded
section and the blade is bolted
into position
Type TC
Used as a drag-oout cleats
Type TC-XS
The cleat base is a moulded
section and the blade is bolted
into position
20
Vancouver
Belo
Santiago Horizonte Brisbane
Johannesburg Perth
www.transmin.com.au
2012 2012
WINNER WINNER
INNOVATION C.Y. O'CONNOR AWARD
EXCELLENCE AWARD FOR EXCELLENCE IN
ENGINEERING & TECHNOLOGY