Product Information: A polymer sealer finish for vinyl and marble floors. Non-buffable wax. Needs no polishing.
General Use: A high performance, heavy duty polymer-based sealer finish
specially formulated for resilient floors like vinyl and marble floors of schools, hospitals, hotels, restaurants and similar institutions with heavy foot traffic. May also be used for sealed wooden floors.
Specific Hazards: None
Special Performance Advantages:
DRIES TO A DEEP GLOSS – no need to buff to get mirror-like gloss. DURABLE – resists scratches, scuffing, black heel marks and water stain splashes. EASY TO APPLY & MAINTAIN – self-leveling and fast drying. ECONOMICAL – requires no sealer, saves on labor and time.
Chemical & Physical Properties:
Basic Ingredients: Polymers, combination of waxes, alkali-soluble resins, emulsifier leveling agents, plasticizer, defoamer, drier, preservative, and aqueous vehicle. Appearance: Milky white, translucent free flowing liquid. pH: 7.5-8.5 % Solid: 20.0-23.0% Odor: Very slight ammonia. Drying Time: 15-20 minutes Toxicity: Non-toxic Coverage: Approximately 100 sq m/ gallon/ coat Or 35 sq m/gal for 3 coats
STORAGE & HANDLING
Store in a cool, dry and clean place. Keep container closed when not in use and never return nor mix left-over polymer sealer finish to original container to avoid product contamination. No special respiratory or hand protection is necessary. However, eye goggles may be used as protection against splashes. Simply wash with water spillages. Contains nothing that can harm the environment.
SUGGESTED FIRST AID
Eye Contact: Immediately flood with water for at least 15 minutes. Call a physician. Skin Contact: Wash affected areas with water. Inhalation : Move to fresh air area. Ingestion : Do not induce vomiting. Call a physician.