Professional Documents
Culture Documents
Lab 2
Mesh & Nodal Analysis
THEORY
The mesh analysis determines the mesh or loop currents of the circuit, while the nodal
analysis will provide the potential levels of the nodes with respect to some reference.
The application of each technique follows a sequence of steps, each of which will result
in a set of equations with the desired unknowns. It is then only a matter of solving these
equations for the various variables, whether they are current or voltage.
1. Mesh Analysis
Construct the circuit
R3 R6
100
R1 R2 1k R4
V2 V3
2.7k 5k 10k 5Vdc
V1 20Vdc
10Vdc
0
- Use PSpice to simulate the loop currents. (Hint: use 0-V sources to indicate the
current direction.)
2. Nodal Analyses
Construct the circuit
R1 V1 R5 V2 R6 V3
3. Bridge Network
Construct the circuit
R1 R4
1k 5k
V1 R3
1k
10Vdc
R2 R5
2.2k 3.3k
V2
15Vdc
0
- Use PSpice to simulate the voltage drop (v3) and the current through (i3) resistor-R3