Professional Documents
Culture Documents
3
2
4
5
A-A 1
4 3
Ref. Description
1 Head
2 Rail stop support
3 Retainer lock
4 Upper head bushing
5 Rail stop support welded on both sides
6 Screw and washer
6.3.13 Checking the feeder cone 6.3.14 Fitting the feeder cone -
screw - HP100, HP200 and HP300 HP100, HP200 and HP300
Check the feeder cone and central bolt for Set the one down on the screw, insert the screw
wear; replace if necessary. (HM20 for HP100 and HM30 for
IF A FEEDER CONE FALLS INTO THE HP200/300) and tighten it. The cone has a
CAVITY, IT CAN CAUSE SERIOUS male part that fits into the female part of the
DAMAGE. Regularly check that the cone’s screw, to prevent the cone rotating.
locking bolt is tight. If in doubt, change the
bolt.