BS) Ca ammae
BSC construction Equipment & Accessories Co.
Head office : Rm No.804, 152, Jaseong-ro, Nam-gu, Busan, Republic of Korea.
Tel.:+82.70.4126.0514 Fax : +82.51.692.0514 E-mail: info@bsccea.com
Website : http:/www.bsccea.com
Branch : 6-7, Suyeong-ro 39beon na-gi, Nam-gu, Busan, Republic of Korea,
‘Tel.:+82.17.870,3498BSC nits
DTH HAMMER & BIT en
CONTENTS
+ DOWN THE HOLE HAMMER
Small Down The Hole hammar (4"~12") ------------
Medium & Large Down The Hole hammer (14"~28" & 32°~40") - -
+ MULTI HAMMER [CLUSTER HAMMER] -- ---------- 8
+ HAMMER BITS --------------0--22-2-02 20 9~11
Button Bit - -
Extend-Shrink
Kodex Bit - -
* INTERCHANGEABLE BIT SHANK TYPE- - - - - - ------ 12
296DOWN THE HOLE HAMMER
a
|
| Various sizes of DTH hammer
ranging from 4” up to 40”
|
To drill (soft / hard) rock layer on jobsite, DTH (Down The Hole) hammer is widely used,
BSC is truly a worldwide player and is supplying high quaity DTH hammer to the global market.
State-of-the-art technology in BSC DTH hammer have kept pace with the new breed of drilling machines
-Top sub is available in API pin or Hexagonal joint according as customers’ requirements.
~ Drive sub (Chuck) is connected to hammer body with Special pins to solve problems of inconvenience
in dismantling drive sub from hammer.
~To reduce the number of consumable parts and also, to let operators carry out easily
the hammer assembly / disassembly works.
- The hammer operates at highest efficiency with a blank choke.
- Bypass choke can be used when additional air is required for cuttings removal through hole.PARTS OF DOWN THE HOLE HAMMER
All parts of DOWN THE HOLE HAMMER are precisely made with strict Quality Control.
Because a washer is used, itis easy to separate the bit from the hammer.
To meet clients’ urgent requirements, most of parts are in stock at all times,
SMALL DOWN THE HOLE HAMMER (4” ~ 12”)
B270D HAMMER
| NO, PART NAME
1 TOP SUB
. o2 WASHER
03 O-RING
04 CHECK VALVE
05 SPACER
08 MAKE UP RING.
| o7 COIL SPRING
08 O-RING
09 RIGID VALVE
10 INNER SLEEVE
u ‘STOP. RING.
2 PISTON
13 CASE
14 FOOT VALVE
15 BUSHING
6 BUSH STOP RING
7 BIT RETAINER RING
18 O-RING
19 DRIVE PIN
20 DRIVE SUB
a BUTTON BITSMALL DOWN THE HOLE HAMMER (4” ~ 12”)
—— EEE
HAMMER SIZE a xe o
HAMMER MODEL BOE 80900 BOIS BUIOM BILOD B110S BL4OD BI40S_BL40X
Bsc BLLOD 81108
pit Shank PSPS! DHD#ION _DADSHOA DHDIGOR DHD360
Sandvik spa sp5 SD6 XB
Numa
Haleo MACH
cea 4.1/8" ~ 5° (105-127) 5.8~53/1030-146) 67 1/2152-190)
Hammer DIA, mm on 4 on M16 6 Mo M0140.
Cylinder Bore mm B 7 15 Ey a1 91 M5055
Piston Stroke mm too 100100100 100100 100100100
Piston Weight kg 60° 65 | 60 60 8A. 28.028.0
LengthLess bi) mm 8759259260126 12801290
Weight(Lessbit) ke 34 33 35 60 62 lod 108105
Connection Type API 2 3/8 Reg. Pin APIS W2Reg.Pin API 3 1/2 Reg. Pin
AB) BOGS) 20068) 20069 23063) 20082) 4001.9 420019) 420019)
‘Ait Flow Needed TREE) 3006.5) 315.9) 31589 300085) 410(11,6) 515.4) 580(06.4) 580(16.4)|
SorMin'inin) cee» 3800108) 400011. 400011. 800% 5149 —_70019.8 7400.9 740.20.9
OER 470013.3) 495(14,0) 495(14.0) 470(13.3) 620(17.6) 860244) 910025.8) 910 (25.8)
PRE ay 53005.0) 550015,5) 550015.5)_530015.0) 750(21.2) __1025(29)_1060(30) 10603
HAMMER SIZE a 10" 12"
HAMMER MODEL —BI70S_B180D 8220 8220S BAI2 B270 _BZ70R B270D B27S B2MS-D B270N B27ESR|
BSC 220 BAI2 B270 8270R
5 Inge-ard DADS bapiiz
BitShank sengvik SD8 Sb10 Sp12_SD-12p sbl2
Numa NI20
Haleo
esi! iki) HR ca Pe ed 117/817 1/2'(300-445)
Hammer DA. mm 168 «182-220-226 245275285 278 2525
Cylinder Bore mm 13248 165 216
Piston Stroke mm = 100100 105 105
Piston Weight kg 31 38 46 125
Lengtivtessti) mm 130913451525 1480 14301818 1662 1750 172917291750 1728
Weitdesstiy), A 170200350 3603255715 620G18. «GIS «618637
connection Type APLAR. Pin RegPa Ree Pi JoneT Ree Pa jen APIG 5/8 Reg, Pin
cpigen) = ef etl ee | ee |
cd BGhyy NOUN) 610073 690.19.5) 880(21.9) 8801249) 8301249) 880249) 880(24.9) 880024.) 88024 9)
lirmow Needed GER, 6609.) 202339 980.27.8) 125035.) 125005.0 125035. 10.54 12505. 125005. 125005.0
SCENG@Imin) «FES, $9025.2) 1070003) 1290 (35.5) 1048.1) 170048. 170048. 170048.) 170048.) 170048. 170008.)
2» 1610456) = | = [=] = |= |= f=MEDIUM & LARGE DOWN THE HOLE HAMMER (14” ~ 28” & 32”~ 40”)
B370 HAMMER i] \ Be Mere i ae) use ae ay
4
4
NO PART NAME
O11 TOP SUB
03, O-RING
7 COIL SPRING
08 O-RING
09 RIGID VALVE
MM CASE
| 15 PISTON RETAINER RING
AZ O-RING
18. GUIDE SLEEVE
19 WASHER
20 DRIVE SUB
NO. PART NAME
02 CHECK VALVE
03 WASHER
07, SNAP RING.
zt te
MW FEED TUBE HOUSING
AZ O-RING
14 FEED TUBE
15, CHOKE
17 PISTON
18 FOOT VALVE
19 BUSHING
22 O-RING
23 GUIDE SLEEVE
25 DRIVE SUB
26 BUTTON BITWits) AWN Scioto Sis aso R esa Ocal
8” & 32”~ 40")
GEER HAMMER (1:
16"
B370S | B370R B370KR
8370 8870
370
B370
SD-15
Air Flow Neeed
SCFM(m/nin)
17 1/2" ~ 24°445~610)
HAMMER SIZE 14° 15*
HAMMER MODEL 8320 B320R 8320KR B320N B320NR B320NS B350
‘BSC B320 B320R B320 B350
Ingersoll Rane
Bit Shank sandvik
Numa 120 NI20S_N120S
Haleo
Recommended inmm) La 20'(355~508) 18 21460-610 TE
Hammer DIA. mm 320 325 370x325 325, 355
Cylinder Bore mm 240 260
Piston Stroke mm MS 125
Piston Weight kg 155151 155, 180
Lergtiilessbi) mm 18201765 1820 2056 1986 1885
WeightiLess bit) kg. 905 1037-932 100810231100
come Se
cee - | - | = | = | - | = | -
of BPSlyn 150326) 11502.6 115032. 1152.6 115032.6) 115062.6) 165046.7)
rdtegeany 165046.7) 1650(16.7) 1650116.) 165046.) 1650467) 1650146.7) 200059,2)
oFRERban 2109.8) 2110698) 211069.8) 211069.8) 211058,8) 211069,8) 258075.9)
anes!
vette
376
280
125
202-220-205 202
1895 1904 20001895
1248 1250 1380 1235
APLS 38 HEX’ | APL8SI8
Reg, Pin JOINT Reg. Pin
1280(36.2)
1890(53.5)
27301773
LARGE DOWN THE HOLE HAMMER (32"~ 407)
HAMMER SIZE 18" 24" 26?) aa" a aor
HAMMER MODEL BAJON B4l0S B4l0SR B520K BS20N B52ONR B520NS B64 B700 B00
BSC B520 65208 8640 8700 8900
Ingest
Bit Shank Sandvik S18 SD18
Numa N10 N240N240
Hakeo
facae ning | 11/25 ito 250) Som aban tatty ci
Hammer DIA, mm 410 | 435410 520585520 670x520 640 | 700 900
Cylinder Bore mum 310 380 470520650
Piston Stroke mun 150 150 150150150
Piston Weight = kg 275 263 376 520720 1300
LenginiLessti) mm =—«1993 2040 | 2090-1971 «1975 2025 | 2321 «2200-2025 2200
WeightLestid) kg «15741560 207124402388 2451-3016 3800 4610 6950
Comet Te ‘nist fee hh Regen JOINT JOWNT
AM) 30405) 70498) 200165) 310087.8) 35100109
‘Air low Needed ahahotan 21200600 2540071,9) sion) sonar) seus)
scent) 0h 00005) 5800014) 42000558) GMS. 7190EID
fae)
hte
—————————————MULTI HAMMER [CLUSTER HAMMER]
Various sizes of Multi hammer [Cluster hammer]
ranging from 380mm up to 2000mm
‘Mult harnmer (Cluster harame is designed to drill holes of over 800mm diameter in a single pass.
The model of Multi hammer is determined according to the conditions of construction jobsite, hole diameter, model of driling rig
and s0.on, Multi hammer drilling has been proven forthe performance of efficient, low noise and high speed in the construction job sites.
The driling rigs such as Augar machine, Crane kelly drive, Crane top drive, and other suitable one cen be used together with Multi hammer.
WO] PARTS NAME
1 AR Ta
2 | bowel ew
3 | vont 8our
4 FRAME
5) _NUTASPANGHWASHER
6 | Bortom Pap
7 [por
@ | sorrow coven
@ | 8our
io" | iNNeR SDE Wave
i NNER CENTER HAMNER
ods! | Hote de | Sap | roalLenan) N8;9)tammers
250-280 | _se0rm | s60nm | 1a00nm | 3A
BsD-450 | 450mm | 436mm | 2t00mm | 9EA
BSD-508 | 508mm | 495mm | 200mm | SEA
50-850 | _ssomm | _s42mm | 200mm | _SEA
BSD-600 600mm $70mm 2300mm | SEA
BSD-650 | 650mm | 620mm | 2300mm | SEA
850-800 | _sigmm | 776mm | 280mm | _6EA
850-1000] 000mm | _esomm | _2380mm | _SEA
50-1960] —1950mm | “Te00mm | _2380nm | TEA
250-1500) 500mm | “480mm | 380mm | TEA
650-2000] —2000mm | Taso | 380mm | BEA
-8-HAMMER BITS
BUTTON BI
Button bit +e
ranging from 4” up to 57”
bisa
Button hammer bits are available to fit other brands’ hammers (NUMA, Sandvik, Ingersoll-Rand and others)
and in flat face, concave, convex and drop center type.HAMMER BITS
be aoe
Extend-Shrink BIT enables the Guide Bit to perform most of the drilling directly while the expanded
Bit heads perform the reaming. imizes loss of hammer energy and maintains a high drilling efficiency.
Since Extend-Shrink BIT heads expand and retract concentrically, they will drill and maintain a round hole.
‘The Extend-Shrink BIT system has no tendency to wander, or to produce an offset.
‘This feature assures a straight, round hole, equivalent to that drilled with a conventional bit.
After drilling to the required depth, the Extend Shrink BIT heads are retracted by rotating in the reverse direction
‘when the Bit body is lifted.
EXPANSION DIA(D1)
OHS ONISVO
3did ONISVD.
CASING PIPE IN DIA(D2)
Bit Gauge | ___ Applicable Casing pipe | Guide Bit
Type | Wing | Extended | Retracted Win..D. | Normal |Device OD) Hammer Type
Dilmmm) | (mm) Ds(mm) | Sizelin) | Damm)
ais 4 373 aie | 365.6 | 336.6 | 14" 320__ | SD12, DHD112, Ni20, 6270
365 [4 425 363 | 406.4 | 367.4 | 16" 365__| SD12, DHD112, Ni20, B20
ao | 4 478. 412 | 457.2 | 435.0 ‘SD15, B350
460 [4 530 461 | 508.0 | 482.6 | SD15, B370, SD18, N180
510 [4 580 509 | 568.8 | 633.4 ‘SD18, N180
560 [4 630, 559 | 609.6 | 584.2 ‘SD18, N180, B470
600 [4 685, 600 | 660.4 | 631.8 B520, N240
660 [4 737 654] 711.2 | 683.2 B520, N240
70 [4 784 699 | 758.0_| 730.0 B520, N240
750 | 4 836, 750 | 812.8 | 767.4 8520, B640, N240
Bio] 4 886. 797 | 858.0 | 626.0 8520. B640, N240
-10-HAMMER BITS
KODEX
KODEX BIT
When drilling in unstable ground conditions, collapse of side wall cause the different drilling work and higher expense.
KODEX BIT provides perfect solution to these problems by drilling the ground with casing workat the same time.
‘After driling to the required depth, KODEX BIT can belted up by rotation to the opposite direction through the casing,
Further drilling can be achieved by changing it into a conventional DTH bit.
Size of casing is designed to be purchased for low cost in the market,
Casing LD D>
~ Casing 0D Dz”
BitGauge | __Applicable Casing pipe -
Type [Reamed DIA, Max 0.D.| Win. LD. | Normal sie| oVe® OP: Hammer Type
Dilmm). | De(mm). _Ds(mm). (in)
115 150 | 141.3 | 126.6 5 18 8090, DHD340A
140 185 168.3 | 158.2 e 140 Bi10(S05) nn)
165 215 196.0 | 1788 fe 167 Bi40(806). DHDSEO, KL6
[_ 190 295 | 2020 | 202. 8 190 B140(SD6), DHD360, KLE
240 290 278.1 | 2545 10) 240 B170(SD8), BIB0(0HD380)
280 ayo | 323.9 | 301.7 12 283 —_8220(8D10), N10 ma
355.6 | 336.6 44 320 B270(S012), DHD112, N120
405.4 | 392.4 16 365 | 320
AteINTERCHANGEABLE BIT SHANK TYPE
Recommended Hole Diameter Standard of the
BIT Shank Type | Inch, (mm) BSCHammer
Corse Tngersol-Rand STAT 82 AE TT,
SECOROC 3 _ Secorae z :
A30-15 (DIGGERS) Sandvik (TRW Mission) | 9 5/8°(92) ~ 4°10) =
8090 BSC e090
— COPA Ingersoll-Rand
DHD310A (COPA) Ingersoll-Rand 4 118"(105) ~ B90D
_SD=4 (A34-15) Sandvik (TRW Mission) 990s
MACHA Haleo 090M
| ou-t0 Ingersoll-Rand =a
—buipason (Cores) Ingersoll-Rand ran) ~ 5 314" Lip. B1200
Sandvik CRW Mission) > V8'G2D ~ 5 34°46) 8110S, 81205
Ingersoll-Rand 5 118*(130) = 6°0152)
Ingersoll-Rand BIA0D
Sandvik
Haico 6° (192) = 7 12490)
Sandvik (TRW Mission) 110s
Sandvik BIAOX
Ingersoll-Rand +052) = Bie 8450
a 652) - 8 2216) BN
NISSIONE Driltech Mission (190) ~
SD-8 (A63-15) Sandvik (TRW Mission) 7 yan - 102s 8170s
$08 (463-18) —_. 7 314°0195) ~ 107518 @53)
Ingersoll-Rand 7 718185) — 12308) 8180
ingersolicRand 9 7181250) ~ 11 718'G00)
BSE 9 7181250) = 12°05) B20
Sandvik 11718300) ~ 151080) B220s
BSC ne BAL2
Bsc Ba70
Tone Mes B270T
toe on
5-55, in Iisin Gapan) 3
DHONI Ingersoll-Rand Le are 8270
DUDLL2S Ingersoll-Rand 1s'60) - 24°61)
QL-120 Ingersoll-Rand 12ND ~ 22°60)
SD-12 (Ai00-15) Sandvik (TRW Mission) B270S
$D-120 Sandvik CTRW Mission) 11. 718%G00) ~ 17 112°C445) 82708-D
— [NUMA rosea B270N. B320N
NUMA 18460) = 2610) B320NS
—_cNuwaA 13 718'G50) ~ 201508)
Bsc ae 8320
9a 141G55) - 20608) Be
Bsc Ui ASG 8330
a 17 We'ts)~ 21518650) a
Sandvik (TRW Mission) 171725) = 26660) 3705
| ssc a5) 8370
ae AURA) 281610 Ste
Koken TTR) = 22660) |
Ingersoll-Rand |
NUMA BALON
460) ~
Sandvik Fe BAL0S, BAIOSR
Koken He
Tone 207508) = 30°76) BAST
Bsc 7 . BAT
BEE 21535) ~ 30 318'770) BREA
nate 2610) = 33.12°850) a
BSC 30°(760) ~ 39 3/8100) B520SU
Bsc 28°(700) ~ 38°(960) 640
Bsc rainaaae BSL35,
BSC 32°(810) ~ 46 318'170 BSL
Bsc 471010) = 59°50) 900
———E
-12-