1.STAND MOUNT YOU MAY GET THE MOUNTING LOCATION ALREADY MARKED AT YOUR BOOTH ROOM. IF NOT CHOOSE A MOUNTING LOCATION.
Ballet box
KEEP FOLLOWING THINGS IN MIND.
Ÿ IT SHOULD MOUNTED ABOVE “6 FEET HEIGHT”. Ÿ CHOOSE A WALL OPPOSITE TO “POLLING PARTY” & “BALLET BOX”. Ÿ POWER SHOULD BE REACHABLE AT LOCATION WITH THE HELP OF “EXTENSION CABLE” & keep it continue running . Ÿ Cover windows with paper or something which are in front of camera.
Copyright 2019 @ VMukti solutions Pvt. Ltd. V.01
2.PUT A “CAMERA INSIDE STAND”. Make sure wifi antenna connected to camera
3.PLUG A ROUTER (KEEP ROUTER ON CHARGE)
& SWITCH IT ON. 4.CONNECT “AMBICAM” WIFI IN YOUR MOBILE, PASSWORD – “ambicam123” & check internet connection.
5.WHEN ROUTER IS UP START CAMERA
(POWER ON CAMERA).
6.OPEN “AMBICAM” APP
(CLICK ON “SKIP LOGIN”), Choose Skip option to redirect 7.Operator Login Screen Select STATE and enter your PHONE NUMBER to login and get application access. If you haven't registered yet, contact support to get register.
8.Camera List Screen(Search
Camera Screen) - Get the listing of the camera which are available on same network (ambicam) - Setting gives the option to view camera location on map, create hotspot from application and use your phone as camera.
10.Local Camera Streaming screen
- User can view the video of camera in screen for CONTACT SUPPORT
placement of camera in booth.
- User can check status of live stream & status of SD card. TROUBLE SHOOTING DOCUMENT A.CANNOT SEE CAMERA VIEW IN APPLICATION?
1.CHECK THE CAMERA CHARGER LIGHT IS ON? (POWER AVAILABLE IN SOCKET)
2.PUT A FINGER ON CAMERA SENSOR & SEE IR GETS ON.
3.FIX IF ANY LOOSEN PLUG OR POWER ISSUES IDENTIFIED.
4.IF NOT WORKING, TRY WITHOUT EXTENSION CABLE.
B.CAN SEE CAMERA VIEW BUT CAMERA IS NOT LIVE?
1.CHECK MI-FI DEVICE IS “ON” AND SHOWS SIGNAL.
2.MAKE SURE “ambicam” WI-FI IS AVAILABLE & YOUR
MOBILE IS CONNECTED WITH IT.
3.BROWSE SOMETHING & MAKE SURE INTERNET IS WORKING PROPERLY.
4.Incase of no network or poor network , use your SIM Card in MiFi OR
incase of router not working, use SIM card in your mobile an create hotspot with name. SSID: ambicam Password: ambicam123 Offline Camera Recording 1.PUT A “CAMERA INSIDE STAND”.
2.WHEN ROUTER IS UP START CAMERA (POWER ON CAMERA Check camera on IR on).
4.USE YOUR MOBILE AND
CREATE HOTSPOT WITH NAME. SSID: ambicam Password: ambicam123
3.OPEN “AMBICAM” APP
(CLICK ON “SKIP LOGIN”), Choose Skip option to redirect Nagaland 4.Operator Login Screen Select STATE and enter your PHONE NUMBER to login and get application access. If you haven't registered yet, contact support to get register.
Nagaland
5.Camera List Screen(Select IP
Camera) - Get the listing of the camera which are available on same network (ambicam) - Camera will be available with name IP CAMERA
6.Local Camera Streaming screen
- User can view the video of camera in screen for placement of camera in booth. - User can check status of live stream & status of SD card.