Professional Documents
Culture Documents
Inside Endless Embroidery - ENU
Inside Endless Embroidery - ENU
Inside Endless Embroidery - ENU
add-on
Endleee Hoop
2 Endless Hoop
add-on
Endless Hoop
3. Place the fabric with stabilizer between the outer hoop (D) and
the inner hoop (C). Position the fabric edge so that it is parallel
along guide (A), evenly from top to bottom.
4. Move lever (B) up and to the right to lower the inner hoop. Snap
Futura - Endless Embroidery Hoop - English
it in place to close the hoop. The fabric should be taut in the hoop.
Endless Hoop
3
add-on
Endleee Hoop
You can load one of the Endless Hoop designs that come with the ‘Design
Library’. From the main menu select ‘Create’ and then ‘Design Library’.
Select ‘for Endless Hoop’ category and choose a design of your liking.
Image 1
4. From the main menu, click on ‘File’, then scroll down and click on Design displayed with Endless Hoop in the
‘Transmit to Futura machine’ to transfer the data to the machine. software.
Once you have transferred the data to the machine, a dialogue box
appears called ‘Offset Preview’. You will see your selected design
in the center within a white background area, with the alignment
stitches above and below the design. You will also see images of
the same design both above and below the center design.
The ‘Offset Preview’ function allows you to change the offset
distance, while previewing how the result will look even before you
stitch out the segments. Altering the offset will allow you to have
the endless hoop segments intersect by decreasing the distance
between them, or leave a gap between the segments by increasing
the distance between them.
4 Endless Hoop
add-on
Endless Hoop
At this point, you have 3 options from which to choose:
• you can click on OK if no changes are desired,
• you can click on Cancel to cancel the procedure and move back
to the Machine Navigator dialogue box,
Futura - Endless Embroidery Hoop - English
• you can click and drag the Offset slide bar to move the upper and
lower designs closer or further away, allowing you to preview how
you want your endless embroidery designs to be positioned relative
to one another when they stitch out. Once you have determined
how you want the designs to be placed relative to one another as
you sew them, click OK.
Attention!
Image 1 Image 2
‘Offset Preview’ ‘Offset Preview’
window with no window with offset
offset applied ‘overlap’ applied
The symbol on the slide bar marks the default position with
no offset applied.
Endless Hoop
5
add-on
Endleee Hoop
the machine’s main control panel. This will help prevent the thread
from coming out of the needle with sewing alignment stitches and
long jump stitches. Thread the top of the machine, and leave a
thread tail approximately 6-8” long.
6 Endless Hoop
add-on
Endless Hoop
7. When the design has finished embroidering, the ‘Machine
Navigator’ dialogue box disappears. As long as there have been no
changes or edits to the design after transmission of data, there is no
need to re-send the design to the machine. The data is ready for
the next repeat.
Futura - Endless Embroidery Hoop - English
The ‘Color Block List’ should be displayed along the bottom of the PC
screen for easy reference regarding color sequence. If it is not, the
Color Block List can be accessed from the main menu. Go to ‘Tools’,
then scroll down to ‘Color Block List.’ You will see the color sequence
of your selected design displayed at the bottom of your PC screen.
Image 1
Color Block List
8. Before releasing the hoop, press any one of the shift buttons
(left, right, up or down) on the control panel to move the needle to
its original position.
Endless Hoop
7
add-on
Endleee Hoop
9. Raise and lift lever (B) to release the inner hoop. Reposition the
®
8 Endless Hoop
add-on
Endless Hoop
Tip!
When you start sewing, the alignment stitches from the bottom (left
and right) of the previous design and the alignment stitches at the top
Futura - Endless Embroidery Hoop - English
(left and right) of the current design should meet, forming a small “side-
ways T” shapes (E). This ensures that your designs will be positioned
relative to one another properly. If the alignment stitches don’t meet
properly, press the Start/Stop button to stop embroidering, then press
the Reverse button (located above the Start/Stop button) to back up
your stitches to the beginning again.
Reposition the fabric as necessary, using the shift buttons to ensure the
needle is at the corner of the alignment stitch on the bottom left-hand
side of the completed embroidery design segment (which is now above
the area where you will embroider the next segment), and the right-
hand edge of the fabric is parallel to guide (A).
Endless Hoop
9
add-on
Endleee Hoop
®
Helpful Tips:
• Should you find that the hoop will not release from the machine
because the back of the foot is coming in contact with the endless
hoop clamp, use Reverse/Forward Stitch button to move to another
area that will allow you to remove the hoop. When the bobbin has
been changed, use Forward/Reverse Stitch button to move the
needle back to position and resume sewing. If this is not possible,
due to the type of design you are embroidering, remove the presser
foot and needle to remove the hoop from the machine. Replace the
presser foot and needle to resume embroidering.
10 Endless Hoop
Futura
Futura
Futura
SINGER® and the “S” design and FUTURA ™ are exclusive trademarks of The Singer Company Limited or its affiliates.
©2010 The Singer Company Limited or its affiliates. All rights reserved.