Major diameter, D4 2.875 +0.0625 / -0 No. of thread per inch 10 Length end of pipe to vanish point, L4 2.063 ±0.150 Full crest threads from end of pipe, Lc 1.163 min Length end of pipe to hand tight plane, L1 1.417 Pitch diameter at hand tight plane, E1 2.81326 Hand-tight standoff ring gauge Flat ±0.150 Taper per inch on diameter 0.0625 +0.0052 / -0.0026 Thread pitch 0.100 Lead per inch 1.000 ±0.003 Thread height 0.0556 ±0.002 Cumulative lead 2.000 ±0.006 COUPLING PIN 10 ROUND TUBING THREAD DIMENSION TOLERANCES UNLESS SPECIFIED Description Material 1. Document reference, API Spesification Standard 5B 16th edition, and UNIT MM INCH 5CT 10th edition. .XXX --- ±0.010 2. All dimension are in inch. .XX ±0.25 ±0.030 Treatment Weight .X ±0.8 ±0.060 3. General tolerance unless other wise indicated. X. ±1.5 --- FRACTIONS --- ±1/16 Proj. 3th angle BREAK SHARP ADGES ±0.3 x45° ±0.010 x45° Paper Scale FILLET RADIUS 0.8 ±0.10 0.030 ±0.005 ANGLE ±0.5° ±0.5° A4 CONCENTRICITY SQUARENESS 0.15 DIA 0.01 IN 100 0.005 DIA 0.010 IN 10 Drawing number Rev. PARALLELISM 0.01 IN 100 0.010 IN 10 SURFACE FINISH 3.2 µm 250 µIN