Professional Documents
Culture Documents
1
IMPORT FILE FROM USB TO CONTROLLER: PROCEDURE
2) Press: EDIT
3) Press: PROG
4) Press: FOLDER
5) Press: (OPRT)
2
9) Press: COPY
13) Choose Folder by using the cursor keys & and then press
3
15) Press: PASTE
21) See the machine. Machine’s gantry will move to the position. Wait till machine stop.
4
23) LOAD MATERIAL ON THE MACHINE
Press: TOOL CHANGE MODE , go to tool station & check the tool position
5
RUN THE IMPORT FILE: PROCEDURE
2) Press: RESET
3) Press: EDIT
4) Press: PROG
6
SWITCH OFF THE MACHINE: PROCEDURE
1) Press: EMERGENCY STOP