Professional Documents
Culture Documents
Internal relay
熙睦电器
common normally open
2 3 4 7 8
emergency stop
switch
Key
switch
钥匙 开 关
open
关
电源 +
电
close 82欧 源
电
电
瓶
瓶
battery anode
cathode
正
负
转 转
极← 2
极← 1
i草 i主
o TU
防水16P公头
线在后
使用说明:
E
1起动后请不要拆下电瓶 , 否则仪表会损坏
2.illl压水j,lil传感器接传感器的G端
3朝政四果有异常 , 请对调调i主板的的转速缉部几
4如果充电机萄F端头 , 请参照右图接线.
5为保证模块可靠工作及测匮的精准度,电源或尽量
用1.5以主旦不与具8设备共用电、腐主接线
7161Y-2.3-21
Instructions for use:
1 Please do not remove the battery after starting, otherwise the meter will be damaged
2 The oil pressure water temperature sensor is connected to the G end of the sensor
3 If the speed is abnormal, please try the speed line of the speed control board
4 If the charger has an F terminal, please refer to the connection line on the right.
5 In order to ensure the reliable operation of the module and the accuracy of the measurement
, the power cable should be 1.5 and do not share the power cable with other devices.