Professional Documents
Culture Documents
• Connect Easily
— No configuration
— Compact installation
— Global standardisation
• Control precisely
— Eliminate voltage fluctuations
— Achieve tight tolerances
— Optimise energy use
• Improve processes
— Minimise downtime
— Maximise throughput
— Reduce cost of ownership
Invensys
is becoming
Control Precisely
EFit offers built in power stabilisation and a variety of Standardise Globally
firing modes for different types of load, which lead
EFit power controllers
to energy savings and higher quality end products
offer peace of mind for
when compared to more basic power controllers.
installers working in a
global environment
Reduce hidden energy costs
where industry
• No wasted energy — built in compensation provides stable power regulations form an
control even during power fluctuations, eliminating unexpected essential part of the
changes in heater temperature engineering supply chain.
• Better power factor— save hidden energy costs with dedicated firing
modes for each type of load, including a variety of burst modes that • Conformity to cUL directive (Canada and
provide an efficient alternative to Phase Angle, such as advanced USA)
single cycle firing to reduce flicker in short-wave infrared heaters • CCC exempt: product not listed in
catalogue of products subject to
Consistently high quality end products that comply to standards compulsory certification
• No scrap or rework - linearity better than ±2% of range, accurately • China RoHS
controls heaters and maintains the correct load temperature • CE compliance to power controller
product standards
15A 15A
IN = 16A IN = 16A
10 10A 10 10A
0 0
20 25 30 35 40 45 50 55 20 25 30 35 40 45 50 55
Operating temperature (°C) Operating temperature (°C)
3 Input 8 Fuse
Front view Side view 0V5 0–5V dc NOFUSE Without fuse
4mA20 4–20mA MSFUSE Fuse with microswitch
0V10 0–10V FUSE Fuse without microswitch
Control input
Load Terminals
2/T1 4/T2
All rights are strictly reserved. No part of this document may be reproduced, modified, or transmitted in any form by any means, nor may it be stored in a retrieval system other than for the purpose to act as an aid in
operating the equipment to which the document relates, without the prior written permission of Eurotherm Limited.
Eurotherm Limited pursues a policy of continuous development and product improvement. The specifications in this document may therefore be changed without notice. The information in this document is given in good
faith, but is intended for guidance only.
Eurotherm Limited will accept no responsibility for any losses arising from errors in this document.