Professional Documents
Culture Documents
16 / 20 / 22 kW
Air-Cooled Generator Sets
Includes
• PrecisionPower™ Electrical Technology
• Base Fascia
F E AT U R E S & B E N E F I T S
• INNOVATIVE DESIGN & RIGOROUS • PRECISIONPOWER™ ELECTRICAL • SINGLE SOURCE SERVICE RESPONSE
TESTING are at the heart of Honeywell's TECHNOLOGY Superior harmonics and from our extensive dealer network
success in providing the most reliable sine wave form produce less than 5% provides parts and service know-how for
generators possible. Honeywell Total Harmonic Distortion for utility the entire unit, from the engine to the
generators use Generac's industry- quality power. This allows confident smallest electronic component.
leading G-Force engine lineup for added operation of sensitive electronic
• Honeywell TRANSFER SWITCHES
peace of mind and reliability for when equipment and micro-chip based
The Honeywell generator line includes its
you need it the most. The G-Force series appliances, such as variable speed HVAC.
own transfer systems and controls for
of engines are purpose-built and
• SOLID-STATE, FREQUENCY total system compatibility.
designed to handle the rigors of extended
COMPENSATED VOLTAGE REGULATION
run times in high temperatures and
This state-of-the-art power maximizing
extreme operating conditions.
regulation system is standard on all
• TEST CRITERIA Honeywell models. It provides optimized
• PROTOTYPE TESTED FAST RESPONSE to changing load
• SYSTEM TORSIONAL TESTED conditions and MAXIMUM MOTOR
• NEMA MG1-22 EVALUATION STARTING CAPABILITY by electronically
• MOTOR STARTING ABILITY torque-matching the surge loads to the
engine. Digital voltage regulation at ±1%.
16 / 20 / 22 kW Technical Specifications
**Sound levels are taken from the front of the generator. Sound levels taken from other sides of the generator may be higher depending on installation parameters. Rating definitions - Standby: Applicable for supplying emergency power for the duration
of the utility power outage. No overload capability is available for this rating. (All ratings in accordance with BS5514, ISO3046 and DIN6271). * Maximum wattage and current are subject to and limited by such factors as fuel BTU/megajoule content,
ambient temperature, altitude, engine power and condition, etc. Maximum power decreases about 3.5 percent for each 1,000 feet (304.8 meters) above sea level; and also will decrease about 1 percent for each 6 °C (10 °F) above 16 °C (60 °F).
16 / 20 / 22 kW Available Accessories
MODEL # PRODUCT DESCRIPTION
The Wi-Fi enabled LP fuel level monitor provides constant monitoring of the connected LP fuel tank.
Wi-Fi LP Fuel Level Monitoring the LP tank's fuel level is an important step in making sure your generator is ready to run
G007005-0
Monitor during an unexpected power failure. Status alerts are available through a free application to notify when
your LP tank is in need of a refill.
Every standby generator requires a battery to start the system. Generac offers the recommended 26R wet
G005819-0 26R Wet Cell Battery
cell battery for use with all air-cooled standby product (excluding PowerPact®).
The pad warmer rests under the battery. Recommended for use if the temperature regularly falls below 0°F
G007101-0 Battery Pad Warmer
(-18°C) . (Not necessary for use with AGM-style batteries.)
Oil warmer slips directly over the oil filter. Recommended for use if the temperature regularly falls below
G007102-0 Oil Warmer
0°F (-18°C).
The breather warmer is for use in extreme cold weather applications. For use with Sync™ controllers only in
G007103-1 Breather Warmer
climates where heavy icing occurs.
Auxiliary Transfer Switch The auxiliary transfer switch contact kit allows the transfer switch to lock out a single large electrical load
G005621-0
Contact Kit you may not need.
If the generator enclosure is scratched or damaged, it is important to touch up the paint to protect from
G006160-0 Paint Kit future corrosion. The paint kit includes the necessary paint to properly maintain or touch up a generator
enclosure.
Scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance
G006485-0 Scheduled Maintenance Kit
on a Honeywell automatic standby generator.
Smart Management Manage large loads by utilizing up to 8 individual Smart Management Modules. These devices are
G006874-0
Module (50 Amps) installed directly in line with existing appliance wiring for easy installation.
1218 mm
637.6 mm [48.0 in]
[25.1 in] MODEL UPC
G007059-1 696471074246
G007062-1 696471074253
G007065-2 696471074284
727.2 mm
[28.6 in]
648 mm 1232 mm
[25.5 in] [48.5 in]
LEFT SIDE VIEW FRONT VIEW
Generac Power Systems, Inc. ©Generac Power Systems, Inc. All rights reserved.
Specifications subject to change without notice.
S45 W29290 Hwy. 59
Waukesha, WI. 53189 The Honeywell trademark is used under license from Honeywell International Inc.
Honeywell International Inc. makes no representation or warranties with respect to this product.
1.855.GEN.INFO This product is manufactured by Generac Power Systems, Inc., Waukesha, WI. 53187, USA.
www.honeywellgenerators.com
Part No. 10000000220 Revision E (03/16/18)