Professional Documents
Culture Documents
ET 203
Parabolic trough collector with solar tracking
x 2E
• mobile parabolic trough collector The parabolic trough collector can be • focusing of solar radiation with a parabol-
with motorized two-axis tracking tracked via two geared motors to track ic trough mirror
• astronomical and sensor-based the position of the sun. Both control ac- • optical concentration factor
tracking cording to calculated astronomical data • DNI: Direct Normal Irradiance
• plant control using an integrated and sensor-based control are possible. • sensor-based sun tracking
PLC The solar circuit is protected by an expan- • astronomical sun tracking
• integrated router for operation and sion tank and a safety valve. The temperat- • conversion of radiant energy into heat
control via an end device and for ures in the storage tank, at the outlet and • losses in thermal solar collectors
screen mirroring on additional end inlet of the collector and the flow in the sol- • efficiency curves
devices: PC, tablet, smartphone ar circuit are measured.
Parabolic trough collectors consist of Operation and control are carried out via
parabolically shaped mirror surfaces in the integrated PLC and touch screen. By
which the solar radiation is collected and means of an integrated router, the trainer
concentrated in an absorber. A heat trans- can alternatively be operated and con-
fer fluid flows in the absorber tube and trolled via an end device. The user inter-
transports the heat to its destination. face can also be displayed on additional
end devices (screen mirroring). Via the
With ET 203 the main aspects of solar PLC, the measured values can be stored
thermal energy use with a parabolic internally. Access to stored measured val-
trough collector can be investigated. For ues is possible from end devices via WLAN
this purpose, solar radiation is focused by with integrated router/ LAN connection to
a parabolic mirror on an absorber tube. the customer‘s own network.
The radiation energy is absorbed and con-
verted into heat. To reduce heat loss, the The parabolic trough collector can be
absorber tube is equipped with a double- pivoted and aligned vertically for experi-
walled glass envelope. Through a pipeline ments with the artificial light source
in the absorber, the heat is transferred to HL 313.01. Rollers and movable supports
a heat transfer fluid in the solar circuit. Via make it possible to position and operate
a plate heat exchanger the heat is trans- the test stand at a suitable outdoor loca-
ferred to the hot water circuit and the tion with little effort.
storage tank.
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 1/3 - 11.2021
gunt
ET 203
Parabolic trough collector with solar tracking
Specification
Technical data
Measuring ranges
• flow rate: 20…320L/h
• temperature: 4x 0…160°C
• pressure: 0…6bar
Scope of delivery
1 trainer
1 set of instructional material
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 2/3 - 11.2021
gunt
ET 203
Parabolic trough collector with solar tracking
Optional accessories
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 3/3 - 11.2021
Powered by TCPDF (www.tcpdf.org)