Professional Documents
Culture Documents
02
H5 Handy Recorder
Introduction
Thank you very much for purchasing a ZOOM Handy Useful operation features
Recorder. The has the following features.
• SDHC cards (up to 32GB) can be used as recording
Stereo mics can be changed according to use media.
An XY mic that can record sound images with depth is • In addition to the standard headphones output, a line
included. You can switch mics according to the situation as output jack is built-in. This allows you to send the audio
you would switch lenses on an SLR camera. signal to a video camera or other device while monitor-
Record up to 4 tracks at once ing with headphones.
In addition to the swappable stereo mic (L/R inputs), the • When connected by USB, in addition to use as a card
Introduction
main unit has 2 XLR/TRS inputs (Inputs 1/2). reader or conventional 2 IN/2 OUT audio interface, it can
Use these to simultaneously record a maximum of 4 tracks, also be used as a 4 IN/2 OUT interface (driver required
including ambiance, narration, an overall sound image and for Windows).
the voices of multiple performers, for example. • Of course, a tuner, a metronome and playback speed
Advanced recording features and pitch adjustment functions are included among the
useful features shared with other H series recorders. A
• The XY mic uses a shock mount structure to minimize remote control (wired) is also available.
external vibration noise. In addition, it can handle sound
pressure input of up to 140 dBSPL, allowing it to capture
sounds that previous recorders could not handle. With
this capability, it can make stereo recordings with excel-
lent separation.
• Using the L/R inputs, you can simultaneously record a
backup file with a recording level that is 12 dB less than
the regular recording. You can use this backup recording Please read this manual carefully to fully understand the
if an unexpected loud noise should cause the regular functions of the so that you can make the most of it
recording to distort, for example. for many years.
• All input volume (gain) levels can be adjusted quickly by After reading this manual, please keep it with the warranty
hand using dedicated knobs. in a safe place.
03
Contents
Safety and usage precautions ...................................02 Pre-recording ..............................................................29 Adjusting the input signal monitoring mix ..............82
Introduction ................................................................03 Counting in before recording ....................................30 Lowering the line output level ..................................84
Contents ......................................................................04 Adjusting the side mic level .....................................31 Monitoring MS-RAW signals.....................................85
Names of parts ...........................................................05 Backup recording .......................................................32 Converting input MS signals to stereo .....................86
Mic overview ..............................................................07 Overdubbing...............................................................33 Mixing input signals to mono ...................................88
XY mic......................................................................07 Playback................................................................ 38 Setting the recording format .....................................89
Connecting mics .....................................................07 Changing automatic recording settings ...................90
Basic playback ............................................................38
Disconnecting mics .................................................07 Setting the automatic recording start level...........90
Selecting playback project/files from lists ................40
Connecting mics/other devices to Inputs 1/2 ...........08 Setting automatic stopping ....................................91
Changing the playback mode....................................41
Connecting mics .....................................................08 Setting how projects/files are named .......................92
Contents
04
H5 Handy Recorder
Names of parts
Left Front
XY mic
Names of parts
Input volume L/R
Display
PHONE jack
VOLUME button
Back Forward
button button 05
Names of parts (continued)
Right/Back Bottom
Names of parts
Scroll button
Up/down: Select
menu items Speaker (back)
Press: Confirm
menu selection
MENU button
Press:
Open menu,
Return to last screen XLR TRS
06
H5 Handy Recorder
Mic overview
The XY mic included with the can be swapped according to your need with another input capsule.
Mic overview
main unit, inserting it
completely.
Disconnecting mics
While pressing the
Features
buttons on the sides of
• Shock mount structure minimizes external vibration
noise. the mic, pull it out of the
• Mic can handle sound pressure input of up to 140 dBSPL,
allowing it to capture sounds that previous recorders main unit.
could not.
• Three-dimensional sound with natural depth and width.
NOTE NOTE
The XY mic has a MIC/LINE input jack that can be used to con- • When disconnecting a mic, do not use too much force.
nect an external mic or line-level device. This jack can also pro- Doing so could damage the mic or the main unit.
vide plug-in power to mics that use it. ( P. 97) • Recording will stop if a mic is removed during recording.
07
Connecting mics/other devices to Inputs 1/2
In addition to the L/R inputs from the XY mic, the also has Inputs 1/2. These can be used together to record up to 4
tracks at the same time.
You can connect mics, instruments and other devices to Inputs 1/2.
L/R inputs
Direct input of passive guitars and basses is not supported.
Connect these instruments through a mixer or effects
device.
Turn the PAD function ON when connecting a mixer or
other device with a standard output level of +4dB.
( P. 98)
Input 1 Input 2
Connecting mics
Connect dynamic mics and condenser mics to the Input 1/2
XLR jacks.
Phantom power (+12V/+24V/+48V) can be supplied to con-
denser mics. ( P. 96)
08
H5 Handy Recorder
L/R
L/R
Lapel mic
PA mixer 1 2
1 2
09
Display overview
Home/Recording Screen
Folder name
Empty
Track L/R
Clip
Track 1/2 indicator
Level meter
(Recording input level)
LO CUT
( P. 93)
COMP/
LIMITER
PAD and inputs affected ( P. 98)
( P. 94)
MS STEREO Phantom power voltage and
MATRIX Inputs affected ( P. 96)
( P. 86)
Recording format
(During use as an audio interface,
computer or iPad setting shown)
10
H5 Handy Recorder
Playback Screen
Display overview
Paused
Stereo track
Mono track
Level meter
(playback level)
11
Supplying power
Preparations
1. Turn the power off and then remove the battery 1. Connect a USB cable to the USB port.
cover.
NOTE
• Use alkaline batteries or
rechargeable NiMH batteries.
• If the battery indicator
becomes empty, turn the
power off immediately and
install new batteries.
• Set the type of battery being
used. ( P. 17)
12
H5 Handy Recorder
Loading an SD card
Preparations
1. Turn the power off and then open the SD card slot NOTE
• Always turn the power off before inserting or remov-
cover. ing an SD card. Inserting or removing a card while the
power is on could result in data loss.
• When inserting an SD card, be sure to insert the correct
2. Insert the SD card into the slot.
end with the top side up as shown.
• If an SD card is not loaded, recording and playback are
not possible.
Loading an SD card
To eject an SD card: • See “Formatting SD cards”. ( P. 106)
Push the card further into the slot and then pull it out.
13
Turning the power on and off
Preparations
1. Slide to . 1. Slide to .
Turning the power on and off
NOTE NOTE
• The first time you turn the power on after purchase, you Keep sliding the switch until "Goodbye See You!" appears.
must set the date/time. ( P. 16)
• If “No SD Card!” appears on the display, confirm that
the SD card is inserted properly.
• If “Card Protected!” appears on the display, the SD card
write-protection is enabled. Slide the lock switch on the
SD card to disable write-protection.
• If “Invalid SD Card!” appears on the display, the card is
not correctly formatted. Format the card or use a differ-
ent card. See “Formatting SD cards”. ( P. 106)
14
H5 Handy Recorder
Preparations
Using the hold function
The has a hold function that disables the buttons in order to prevent accidental operation during recording.
15
Setting the date and time *
Preparations
By setting the date and time, the recorder can store the recording date and time in files.
2. Use to select
Setting the date and time
“SYSTEM”, and
Changing settings
press .
Move cursor: Move up and down
3. Use to select
move up and down
“DATE/TIME”, and
Confirm change: Press
press .
5. Press
*The first time you turn it on after purchase, you must set the
date and time.
16
H5 Handy Recorder
Setting the type of battery used
Preparations
Set the type of battery used so that the amount of remaining battery charge can be shown accurately.
press .
3. Use to select
“BATTERY TYPE”,
and press .
17
Recording process
Recording
Playback
Turn power Prepare to Record Overdub
Connect and check
on ( P. 14) record ( P. 24) and edit
Recording process
( P. 38)
• Connect the XY mic. • Start recording: • Start playback: • You can also, for
( P. 7) example, overdub
• Stop recording: • Stop playback:
( P. 33), mix
• Connect mics, • You can also • Make settings for marks down to a stereo
instruments and make mark settings. ( P. 39), AB repeat ( P. 46), file ( P. 54) and
other equipment to ( P. 24) playback speed ( P. 44), check project/file
INPUTS 1/2. ( P. 8) playback pitch ( P. 42), information.
• Pause recording:
playback mode ( P. 41), and
the project mixer ( P. 48) as
desired .
1. Set the recording mode ( P. 20) 2. Select the recording tracks ( P. 22) 3. Adjust input levels
• Select MULTI FILE mode or STEREO FILE mode. • Use the track buttons to select tracks. When the
The file types and formats of recordings differ selected track indicator lights red, the input signal • For each input, use
according to the mode selected. can be monitored.
• Adjust them so that the level meter stays near
• In MULTI FILE mode, you can also press both
• You can also make settings for automatic −12 dB when the loudest sound is input.
INPUT 1 and 2 track buttons at the same time to
recording ( P. 27), pre-recording ( P. 29), • You can, for example, also adjust the side mic level
use them as a stereo track (stereo link).
backup recording ( P. 32), low cut ( P. 93), (when using an MS capsule) ( P. 31).
the compressor/limiter ( P. 94) and the
metronome ( P. 80), for example.
18
H5 Handy Recorder
Recording mode overview
Recording
The has two recording modes: MULTI FILE and STEREO FILE.
The file types and formats of recordings differ according to the mode.
HINT
By linking Inputs 1 and 2, you can also record them together as
a single stereo file. When Inputs 1 and 2 are linked, two stereo
files will be created. One for the L/R inputs and one for the 1/2
Inputs.
L/R L/R
ZOOM0001_TrLR.WAV
(Stereo) M
I
ZOOM0001.WAV
ZOOM0001_Tr1.WAV X (Stereo)
E
ZOOM0001_Tr2.WAV R
1 2 1 2
Recording format limited to 44.1/48kHz 16/24bit WAV 96kHz 16/24bit WAV and MP3 recording formats also okay 19
Selecting the recording mode
Recording
1. Press .
2. Use to select
REC MODE,
and press .
Selecting the recording mode
recording mode,
and press .
20
H5 Handy Recorder
Folder and file structure on the H5
Recording
When recording with the , folders and files are created on the SD card in the following manner.
Root
MULTI FILE
mode folder
Select FOLDER01-10
as the place to save
projects
FOLDER01 FOLDER02 FOLDER10
Project name: ZOOM0002 Project name: DualStereo Project name: 140531-163015 Project name: LongRecording Project name: ZOOM006
Backup recording: No Backup recording: Yes Backup recording: No Backup recording: No Backup recording: No
INPUTS 1/2: Mono INPUTS 1/2: Stereo Voice memo: Yes Created if recording exceeds 2 GB Additional recording created
ZOOM0001 ZOOM0002 ZOOM0003 ZOOM0004 ZOOM0005 ZOOM0006
Stereo file of signals Stereo file of signals Stereo file of signals First file when recording First stereo file recorded
A new project is created for recorded from L/R inputs recorded from L/R inputs recorded from L/R inputs exceeds 2 GB to L/R track
each recording. Folders are
created for each given ZOOM0002_TrLR.WAV ZOOM0003_TrLR.WAV ZOOM0004_TrLR.WAV ZOOM0005_TrLR-0001.WAV ZOOM0006_TrLR.WAV
project on the SD card and
Stereo file of signals
named ZOOM0001-9999. Mono file of signal Second file when recording Additional stereo file
recorded from stereo-linked Voice memo recording file
recorded from INPUT 1 exceeds 2 GB recorded to 1/2 tracks
INPUTS 1/2
ZOOM0002_Tr1.WAV ZOOM0003_Tr12.WAV ZOOM0004_VM.MP3 ZOOM0005_TrLR-0002.WAV ZOOM0006_Tr12-01.WAV
Mono file of signal Project when project Stereo file created by
L/R inputs backup file
recorded from INPUT 2 naming is set to “DATE” mix down
Stereo file of signals Stereo file of signals MP3 file when file First file when recording
recorded from L/R inputs recorded from L/R inputs naming is set to “DATE” exceeds 2 GB
21
Selecting inputs and adjusting levels
Recording
record.
HINT
Selecting inputs and adjusting levels
NOTE
• In STEREO FILE mode, you can select the L/R inputs by
pressing the L or R track button and Inputs 1/2 by
pressing the 1 or 2 track button.
3 • In STEREO FILE mode, the L/R inputs and the Inputs 1/2
are selected in pairs. You cannot select just one of either
1,2 pair.
holding 1 .
Recording
HINT
If a combo type input capsule is connected to the L/R 3. Turn for the
inputs, you can enable and disable the stereo link with
selected input to adjust
these tracks in the same manner by pressing the R track
button while pressing and holding L . the input level.
23
Recording
Recording
1. Press .
Recording
4
HINT
1 During playback, you can press and to jump to
places where marks have been added.
NOTE
• Marks can only be added to WAV format files.
3. Press to pause.
NOTE
• When recording is paused, a mark is added at that point.
• Press to resume recording.
24
H5 Handy Recorder
Recording
4. Press to stop.
NOTE
• In MULTI FILE mode, a maximum of 99 marks can be
added to a single project. In STEREO FILE mode, a
maximum of 99 marks can be added to a single file.
• If the file size exceeds 2 GB when recording in MULTI
FILE mode, a new file will be created automatically in
Recording
the same project and recording will continue without
pause. When this happens, numbers will be added to the
ends of the file names: “-0001” for the first file, “-0002”
for the second file and so on.
• If the file size exceeds 2 GB when recording in STEREO
FILE mode, a new file will be created automatically in
the same folder and recording will continue without
pause.
25
Setting where projects/files are saved
Recording
Choose one of ten folders as the folder where new recorded projects (in MULTI FILE mode) and files (in STEREO FILE
mode) will be saved.
1. Press .
26
H5 Handy Recorder
Recording automatically
Recording
Recording can be started and stopped automatically in response to the input level.
Recording automatically
5. Use to select “ON",
and press .
MULTI FILE mode STEREO FILE mode
3. Use to select
NEXT
27
Recording automatically (continued)
Recording
or stop recording.
7. Press .
MULTI FILE mode STEREO FILE mode
Recording standby starts.
NOTE
This cannot be used at the same time as the PRE REC,
METRONOME and PRE COUNT functions. When AUTO
REC is turned ON, these other functions will be disabled.
28
H5 Handy Recorder
Pre-recording
Recording
By setting the recorder to constantly capture the input signal, you can start recording two seconds before pressing the
button. This is useful when, for example, a performance starts suddenly.
and press .
2. Use to select “REC", and press .
Pre-recording
NOTE
This cannot be used at the same time as the AUTO REC,
METRONOME and PRE COUNT functions. If any of these
MULTI FILE mode STEREO FILE mode are turned ON, PRE REC will be disabled.
29
Counting in before recording
Recording
“TOOL", and
press .
press .
NOTE
• This cannot be used at the same time as the AUTO REC
function. When AUTO REC is turned ON, PRE COUNT
will be disabled.
• This cannot be used at the same time as the PRE REC
function. When PRE COUNT is turned ON, PRE REC will
be disabled.
• The count can be set to 1–8 or SPECIAL. Set to SPECIAL,
the precount will use the following pattern.
A
30
H5 Handy Recorder
Adjusting the side mic level MS capsule only
Recording
When using an input capsule that allows the side mic level (stereo width) to be adjusted, such as an MS capsule, you can
adjust the side mic level before recording.
NOTE
1. Use to adjust the side mic level
• Set to Off, −24 to +6 dB, or MS-RAW mode.
• When recording in MS-RAW mode, during playback
RAW mode
move up and down to adjust the side mic level.
Narrow
31
Backup recording L/R input only (with 44.1/48kHz WAV only)
Recording
When using the L/R input, in addition to the recording at the set input level, the recorder can also record a separate file at a
level 12dB below. This backup can be used if the recording level was set too high, causing distortion, for example.
and press .
2. Use to select “REC", and press .
Backup recording
NOTE
• If the name of the original file is, for example,
“ZOOM0001_TrLR.wav”, the name of the backup file will
be “ZOOM0001_TrLR_BU.wav”.
MULTI FILE mode STEREO FILE mode
• A backup file will not be created if the L/R input is not
selected.
• The LO CUT and COMP/LIMITER settings will not affect
3. Use to select the backup recording.
• To play a backup recording file, select and play the file
“In L/R BACKUP", and with "_BU" added to the end of the file name. (For MULTI
FILE mode, see step 12 P. 35. For STEREO FILE
press .
mode, see P. 40.)
HINT
Using backup recording will increase the amount of SD
card space used.
32
H5 Handy Recorder
Overdubbing MULTI FILE mode only (with 44.1/48kHz WAV only)
Recording
You can add recordings later to an already recorded project.
“MIXER/OVERDUB", and
2. Use to select press .
Overdubbing
“PROJECT", and
press .
5. Use to select
“MIXER/OVERDUB", and
3. Use to select press .
the project you want
to overdub, and The track button indicators light green for already
HINT
You can only overdub recordings in projects recorded Cursor
(selected track)
using MULTI FILE mode.
Shows setting
values
NEXT
33
Overdubbing MULTI FILE mode only (continued)
Recording
6. Press the track button for the track you want to 8. To play back an already recorded track while over-
overdub. Its indicator will light red. dubbing, press that track's button to light the indi-
cator green.
You will now be able to monitor the input signal for the
HINT
track to be overdubbed.
• The indicators change in order: red green unlit.
Overdubbing
HINT • In this state, if you press , you can monitor the sound
You can also change the Input 1/2 stereo link setting. of the selected tracks being played back along with the
( P. 22) input signal of the track selected in step 6. This is useful
for rehearsing and checking the input level.
• You can also adjust the volume and panning of the
tracks that are playing back.
7. Turn to adjust the input level.
9. Press .
NOTE
• The AUTO REC and PRE REC functions cannot be used
with overdubbing.
• When using the MIXER/OVERDUB screen, the PLAY-
BACK SPEED and KEY CONTROL settings for the project
are disabled.
34
H5 Handy Recorder
Recording
HINT
Even if the overdubbed track already had a recorded file,
11. To check the recording, press .
Overdubbing
any tracks.
dubbed recordings into a stereo file. ( P. 54)
Project folder
Overdub
using track 1
12. To change the track
L R 1 2
Project folder that the recording file is
ZOOM0002_TrLR.WAV ZOOM0002_Tr1.WAV ZOOM0002_Tr2.WAV
File added to
assigned to, use
project
ZOOM0002_Tr1-01.WAV
to select the track, and
press .
35
Overdubbing MULTI FILE mode only (continued)
Recording
NOTE
13. Use to select FILE,
Track name Name of
assigned file
• If the selected track is stereo, you can only assign a
stereo file to it. If it is mono, you can only assign a
and press .
mono file.
• Files recorded in MS RAW mode cannot be assigned to
tracks 1/2.
HINT
Overdubbing
want to assign to the track. After adding a recording, the audio files assigned to the
36
Recording Overdubbing
37
H5 Handy Recorder
Basic playback
Playback
1. Press .
HINT
• The longer you press and hold or , the faster
searching backward/forward becomes.
• In MULTI FILE mode, during playback you can press track
2 buttons to unmute (lit green) and mute (unlit) them.
• If there is a problem with the selected project /file,
"Invalid Project!" or "Invalid File!" will appear on the
display.
• If there is not even one project /file that can be played,
"No Project!" or "No File!" will appear on the display.
38
H5 Handy Recorder
Playback
Add a mark during playback
2. To return to the Home Screen, press or .
a mark.
HINT
Basic playback
MULTI FILE mode STEREO FILE mode
A maximum 99 marks can be added.
NOTE
• Marks can only be added to WAV format files.
Press .
Speaker Headphones
HINT
You can adjust the volume of the speaker and head-
phones independently. You can set them from 0–100.
39
Selecting playback project/files from lists
Playback
press .
Selecting playback project/files from lists
NOTE
MULTI FILE mode STEREO FILE mode After playback completes, playback might continue
depending on the playback mode. ( P. 41)
press .
40
H5 Handy Recorder
Changing the playback mode
Playback
You can set the playback mode.
NOTE
PLAY ONE: Play only the selected project/file.
PLAY ALL: Play from the selected project/file to the
last project/file.
3. Use to select
REPEAT ONE: Play the selected project/file repeatedly.
“PLAY MODE", and REPEAT ALL: Play all the projects/files in the selected
folder repeatedly.
press .
41
Changing the playback pitch (key)
Playback
The pitch can be changed while keeping the same playback speed.
and press .
and press .
NOTE
In MULTI FILE mode, the pitch change will affect the entire
project, and cannot be set for each track independently.
MULTI FILE mode STEREO FILE mode
42
H5 Handy Recorder
Playback
6. Use to set the playback pitch,
and press .
Playing
Playback will occur with the changed pitch. The pitch can
NOTE
• That pitch change can be set between 6 and 6.
• In MULTI FILE mode, the changed value is saved sepa-
rately for each project.
• In STEREO FILE mode, the changed value is saved for
the mode.
• On the MIXER/OVERDUB screen, KEY CONTROL is
disabled.
43
Changing the playback speed
Playback
You can adjust the playback speed in a range from 50% to 150% of normal.
and press .
and press .
44
H5 Handy Recorder
Playback
6. Use to adjust the playback speed,
and press .
Playing
NOTE
• This speed can be changed to between 50% and 150% of
normal.
• In MULTI FILE mode, the changed value is saved sepa-
rately for each project.
• In STEREO FILE mode, the changed value is saved for
the mode.
• On the MIXER/OVERDUB screen, PLAYBACK SPEED is
disabled.
45
Repeat playback of a set interval (AB repeat)
Playback
back.
46
H5 Handy Recorder
Playback
NOTE
6. Use to select the
You can end A-B repeat playback by doing one of the
following during repeat playback.
B point icon, and set the
• Press or to select a different project /file.
repeat playback ending
7. Press .
47
Mixing projects MULTI FILE mode only
Playback
You can adjust the volume and panning of each playback track.
“MIXER/OVERDUB", and
2. Use to select press .
Mixing projects
“PROJECT", and
press .
4. Use to select
“MIXER/OVERDUB", and
press .
48
H5 Handy Recorder
Playback
7. Change parameter NOTE
Mix settings are saved with each project separately and
values. applied during playback.
HINT
Do the following to check the
Mixing projects
LO CUT, COMP/LIMITER and MS
Mixing controls STEREO MATRIX settings.
Track L or L/R
selected ……………
Move cursor/change value: Move up/down
Track 2 or 1/2
selected ……………
49
Checking/editing projects/files
and press .
2. Use to select “PROJECT/FILE LIST",
Checking project/file information
and press .
50
H5 Handy Recorder
Checking/editing projects/files
Checking track marks WAV format only
HINT
and press .
Changing project/file names
5. Use to select
press .
3. Use to select the project /file name to change,
and press .
52
H5 Handy Recorder
Checking/editing projects/files
6. Change the name.
NOTE
• The following characters can be used in project/file
names.
(SPACE) !#$% &'()+,-0123456789;=@ABCDEFGHIJKLMNOPQRSTU-
VWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{ }~
7. Press .
53
Checking/editing projects/files
You can mix down a project that has been recorded using MULTI FILE mode into a stereo WAV file.
press .
“PROJECT", and
press .
6. To change where the mix
7. Use to select
4. Use to select
where to save it and
press .
“MIXER/OVERDUB",
and press .
54
H5 Handy Recorder
Checking/editing projects/files
8. Use to select the project / folder where it will 10. Use to select “EXE-
NOTE
MULTI FILE mode STEREO FILE mode
• The volume and pan settings ( P. 49) made using
MIXER/OVERDUB ( P. 48) will affect the sound of the
“NAME", and
press .
HINT
See step 6 of "Changing project/file names" ( P. 52) for
how to change the file name.
55
Checking/editing projects/files
STEREO FILE mode WAV files can be converted to (encoded into) MP3 files.
“OPTION", and
2. Use to select “FILE press .
Converting WAV files to MP3 files
5. Use to select
FORMAT", and
press .
56
H5 Handy Recorder
Checking/editing projects/files
7. Use to select the
“EXECUTE", and
press .
NOTE
• If the SD card does not have enough open space, the
screen shown in step 6 will reappear.
• The new encoded file will be created in the same folder.
• If the name of the encoded file would be the same as
an existing file, the file name change screen will appear.
Change the name before encoding.
57
Checking/editing projects/files
If the volume of a project recorded using WAV format is too low, you can increase the overall levels of files.
and press .
5. Use to select
press .
3. Use to select the project /file to normalize,
58
H5 Handy Recorder
Checking/editing projects/files
6. Use to select the 7. Use to select “YES", and press .
press .
Normalizing
NOTE
• You cannot select a track that has no recorded file. MULTI FILE mode STEREO FILE mode
• If you select “ALL”, all tracks that have files will be
normalized. This normalization will maximize the level NOTE
of each individual file. When normalized, the level of the entire file will be
• If there are multiple recordings, including overdubs, the increased by the same amount so that the peak level is 0
file currently selected for the track will be normalized. dBFS.
59
Checking/editing projects/files
Dividing projects/files
You can divide a project /file into two at any point.
and press .
5. Use to select
press .
3. Use to select the project /file to divide,
and press .
60
H5 Handy Recorder
Checking/editing projects/files
6. Set the division point. 7. Use to select
“YES",
Division point
and press .
Dividing projects/files
Division point time
Paused
NOTE
Playing
• After dividing a project, the part before the division point
will be given the same name as the original project with
“A” added to the end. The part after the point will have
Controls when dividing “B” added to the end of its name.
• If there are multiple recordings, including overdubs,
the file currently selected for the track will be divided.
Move point: Use and
All other files will be saved with the project for the part
before the division point.
Play/pause: Press
61
Checking/editing projects/files
and press .
5. Use to select
and press .
6. Use to select the starting point icon.
Starting point
(selected)
Ending point
MULTI FILE mode STEREO FILE mode Paused
Starting time
Playing – ending time
62
H5 Handy Recorder
Checking/editing projects/files
7. Use and to find 9. Press .
NOTE
If there are multiple recordings, including overdubs, the
8. Use to select the file currently selected for the track will be trimmed.
manner.
63
Checking/editing projects/files
DELETE", and
2. Use to select “PROJECT/FILE LIST", press .
Deleting multiple files
and press .
to delete, and
3. In MULTI FILE mode, use to select project, Press to cancel file deletion.
and press .
NOTE
In STEREO FILE mode, press . Press to select/unselect all files.
6. Press .
.
to select
You can delete multiple projects in the selected folder at one time.
“PROJECT", and
NOTE
Press to select/unselect all projects.
3. Press .
5. Press .
6. Use to select
66
H5 Handy Recorder
Checking/editing projects/files
Rebuilding a project MULTI FILE mode only
“REBUILD", and
2. Use to select press .
Rebuilding a project
“PROJECT", and
press .
5. Use to select
press .
HINT
A project will not play back if you accidentally discon-
nect the adapter or remove the SD card while recording
or if you use a computer to delete a setting file that the
project requires. In such cases, rebuilding the project
might repair it.
67
Checking/editing projects/files
“PROJECT", and
press .
6. Record the memo.
3. Use to select a
Start recording: Press
Stopped
Playing
“OPTION", and
press .
68
H5 Handy Recorder
Checking/editing projects/files
7. Play the memo.
HINT
69
Data exchange with computers (card reader)
USB functions
By connecting with a computer, you can check and copy data on the SD card.
cable.
2. Use to select
Data exchange with computers (card reader)
NOTE
• If you want to power the using the computer’s
3. Use to select “SD USB bus, connect the cable while the recorder is off and
then turn it on.
CARD READER", and • The following operating systems are supported.
• Windows Vista or later
press . • Mac OS X 10.6 or later
70
H5 Handy Recorder
USB functions
5. Follow the disconnection procedures for the com-
Windows:
Mac:
NOTE
Always follow these procedures before disconnecting the
USB cable.
71
Using as an audio interface
USB functions
You can send signals input through the directly to a computer or iPad as well as output signals from that device
through the .
Use to select
MULTI TRACK mode. You can download this driver from
the ZOOM website (www.zoom.co.jp).
“AUDIO INTERFACE",
and press .
4. Use to select the connected device,
and press .
3. Use to select
“STEREO" or "MULTI
TRACK", and
HINT
If using a computer that does not provide enough power
through its USB bus or using phantom power, select "PC/
Mac (Battery)".
72
H5 Handy Recorder
USB functions
5. Connect the to the computer or iPad using a 7. Use to select
USB cable. “EXIT", and press .
HINT
See “Audio interface settings”. ( P. 74)
and the .
6. Press to disconnect.
73
Audio interface settings
USB functions
When using the as an audio interface, you can make the following settings. Refer to each section for details.
and press .
74
H5 Handy Recorder
USB functions
Monitor signal mixing (MULTI TRACK only)
4. Use to select
When using direct monitoring you can adjust the balance
“ON/OFF", and of the input signals. This mix does not affect the input sig-
nals sent to the computer or iPad.
press .
1.
2. Use to select
press .
press .
NEXT
75
Audio interface settings (continued)
USB functions
Mixing controls
adjustments.
76
H5 Handy Recorder
USB functions
Using Loop Back (STEREO only)
When in STEREO mode, you can mix the sound from the
3. Use to select
computer or iPad with the sound input through the “LOOP BACK", and
and send it back to the computer or iPad again (loop back).
This can be used, for example, to add narration to a musi- press .
77
Using the tuner
You can use the input signal to tune an instrument.
Tools
“TOOL", and
press .
5. Use to change the
standard pitch.
3. Use to select
“TUNER", and
press .
HINT
The standard pitch can be set from 435 Hz to 445Hz.
78
H5 Handy Recorder
Tools
6. For all tuner types except chromatic, you can use 8. Using the tuner.
The following tuner types can be selected.
and to change the pitch (drop tuning).
Center lights when pitch accurate Center lights when pitch accurate
Flat tuning indicator
Detected
string
Note
name
Tuner type
String number/note name
1 2 3 4 5 6 7
Guitar E B G D A E B
Bass G D A E B
Open A E C# A E A E
Open D D A F# D A D
Open E E B G# E B E
Open G D B G D G D
DADGAD D A G D A D
79
Using the metronome
Use the metronome to count in before recording or as a click track.
Tools
1. Press .
Set the "CLICK"
press .
HINT
CLICK has the following options.
OFF: Sound off
REC AND PLAY: Sound on during recording/playback
3. Use to select REC ONLY: Sound on during recording only
PLAY ONLY: Sound on during playback only
“METRONOME", and
HINT
TEMPO can be set from 40.0 to 250.0.
80
H5 Handy Recorder
Tools
Set the "SOUND" Set the "LEVEL"
HINT HINT
SOUND has the following options. The LEVEL range is 0 – 10.
BELL, CLICK, STICK, COWBELL, HI-Q
NOTE
• This cannot be used at the same time as the AUTO REC
Set the "PATTERN" function. When AUTO REC is turned ON, the metronome
will be disabled.
Use to select the • This cannot be used at the same time as the PRE REC
function. When METRONOME is turned ON, PRE REC
metronome pattern, and will be disabled.
press . HINT
81
Adjusting the input signal monitoring mix MULTI FILE mode only
You can adjust the level and panning of each input signal when monitoring.
Tools
3. Use to select
press .
82
H5 Handy Recorder
Tools
5. Change parameter 6. Press to listen to the
adjustments.
NOTE
These volume and panning settings only affect the moni-
toring signal. They do not affect recorded data.
83
Lowering the line output level
You can lower the output level of the LINE OUT jack. Use this when connecting the LINE OUT jack signal to the external mic
Tools
input jack on an SLR camera or other jack with a high input gain.
NOTE
This setting does not affect the level output from the
PHONE jack.
MULTI FILE mode STEREO FILE mode
HINT
LINE OUT LEVEL can be set between −30 and 0 dB.
and press .
84
H5 Handy Recorder
Monitoring MS-RAW signals MS-RAW mode only
When recording in MS-RAW mode with an MS capsule, you can monitor the mid mic input through the left channel and the
Tools
side mic input through the right channel as is.
3. Use to select
85
Converting input MS signals to stereo Input 1/2 only
This unit can convert MS stereo mic signal input through Inputs 1/2 into ordinary L/R stereo signals.
Tools
Turn "ON/OFF"
3. Use to select
“In1/2 MS MATRIX",
86
H5 Handy Recorder
Tools
Set "MID LEVEL" Select "INPUT SETTING"
press .
HINT
MID LEVEL can be set to mute or in a range from −48.0 to
+12.0 dB.
HINT
SIDE LEVEL can be set to mute, or in a range from −48.0
to +12.0 dB.
87
Mixing input signals to mono STEREO FILE mode only Input 1/2 only
The signals input through Inputs 1/2 can be mixed to a single signal that is sent to both channels.
Tools
and press .
2. Use to select
Mixing input signals to mono
“IN/OUT", and
press .
NOTE
• When MONO MIX is ON, the names of recording files
will have "_MN" added to the end of the file name, like
"ZOOM0001_MN.WAV".
• This function cannot be used at the same time as the MS
3. Use to select STEREO MATRIX function. When MONO MIX is turned
ON, MS STEREO MATRIX will be disabled.
“In1/2 MONO MIX", and
press .
88
H5 Handy Recorder
Setting the recording format
Select the format according to the desired audio quality and file size.
Tools
1. Press .
MULTI FILE mode
WAV 48kHz/24bit
STEREO FILE mode
WAV 96kHz/24bit
Audio quality
High
File size
Large
2.
WAV 44.1kHz/16bit WAV 44.1kHz/24bit
Use to select “REC", and press . WAV 48kHz/16bit
WAV 44.1kHz/16bit
3. Use to select
Low Small
press .
89
Changing automatic recording settings
You can set the input levels that cause automatic recording to start and stop, as well as the automatic stop time.
Tools
press .
Changing automatic recording settings
“AUTO REC", and Recording will start automatically when the input level
HINT
This level can be set between −48 and 0 dB.
90
H5 Handy Recorder
Tools
Setting automatic stopping 3. Set the stop level in the same manner as the
2. Use to select the When the input level goes below the set level, recording
stop time, and will stop automatically after the amount of time set in
HINT
This can be set to OFF or from 0 to 5 seconds.
91
Setting how projects/files are named
You can change the type of name that is automatically given to projects/files.
Tools
NOTE
MULTI FILE mode STEREO FILE mode • Project names are given in the following ways.
DEFAULT: ZOOM0001 - ZOOM9999
DATE: YYMMDD-HHMMSS (example: 140331-123016)
3. Use to select “PROJECT NAME"/"FILE NAME", • File names are given in the following ways.
DEFAULT: ZOOM0001.WAV/MP3 - ZOOM9999.WAV/MP3
and press . DATE: YYMMDD-HHMMSS.WAV/MP3
(example: 140331-123016.WAV/MP3)
• DATE format uses the starting time of the recording.
• In MULTI FILE mode, you cannot change how file names
are given.
92
H5 Handy Recorder
Reducing noise (low cut filter)
Other settings
Use the low-cut filter to reduce wind noise and vocal pops, for example.
and press .
2. Use to select “IN/OUT", and press .
press .
NOTE
The LO CUT filter is not used on backup recordings.
93
Adjusting the input level (compressor/limiter)
Other settings
The unit can automatically raise low-level input signals and lower high-level input signals.
and press .
2. Use to select “IN/OUT", and press .
Adjusting the input level (compressor/limiter)
3. Use to select
press .
NOTE
The COMP/LIMITER is not used on backup recordings.
94
H5 Handy Recorder
Other settings
Setting Explanation Threshold Ratio Output Attack time Release
(dB) level (ms) time (ms)
(dB)
OFF Compressor/limiter OFF - - - - -
COMP Standard compressor Compressors reduce -48.7 9:1 +6.0 7.2 968
(GENERAL) high levels and raise
COMP Compressor for vocals low levels. -8.4 16:1 0 1.8 8.7
(VOCAL)
95
Changing the phantom power setting
Other settings
1. Press .
Turning "ON/OFF"
Use to select an
HINT
Select ALL to use phantom power on both inputs.
and press .
3. Use to select “In1/2
PHANTOM", and
Set the "VOLTAGE"
press .
Other settings
When using a mic that uses plug-in power, make the following setting before
connecting it to the MIC/LINE input jack of the XY mic.
and press .
2. Use to select “IN/OUT", and press .
3. Use to select
press .
97
Reducing the input signal level Input 1/2 only
Other settings
When connecting a mixer with a standard output level or +4dB, for example, you can set this unit to reduce the input signal
level −20 dB.
HINT
Select ALL to use the pad on both inputs.
press .
98
H5 Handy Recorder
Setting the counter
Other settings
Set how time is shown during recording
You can set the counter to show either the elapsed recording time (count up) or
the remaining possible recording time (count down).
press .
99
Setting the counter (continued)
Other settings
3. Use to select
press .
100
H5 Handy Recorder
Changing the display backlight setting
Other settings
You can set the display backlight to turn off when no operation is conducted
for 30 seconds in order to save power.
press .
3. Use to select
“BACKLIGHT", and
press .
101
Adjusting the display contrast
Other settings
“SYSTEM", and
press . HINT
This can be set between 1 and 10.
press .
102
H5 Handy Recorder
Checking the firmware versions
Other settings
You can check the software versions used by the .
“FIRMWARE VERSION",
2. Use to select and press .
103
Restoring the default settings
Other settings
“SYSTEM", and
This will restore the default
press .
settings. The unit will auto-
3. Use to select
NOTE
Input level settings are not reset.
“FACTORY RESET", and
press .
104
H5 Handy Recorder
Checking SD card open space
Other settings
1. Press . 3. Use to select
“REMAIN", and
2. Use to select “SD press .
CARD", and press .
105
Formatting SD cards
Other settings
NOTE
• If you use an SD card that has been formatted by a
computer or that you have purchased, you must format
it using the before use.
• Be aware that all data previously saved on the SD card
will be deleted when it is formatted.
3. Use to select
“FORMAT", and
press .
106
H5 Handy Recorder
Testing SD card performance
Other settings
You can test SD cards to confirm that they can be used with the .
The quick test takes very little time, while the full test examines the entire SD card.
Conducting a quick test
5. Use to select
press .
4. Use to select
107
Testing SD card performance (continued)
Other settings
NOTE 1. Press .
Even if an SD card is evaluated as “OK” by the perfor-
mance test, this does not guarantee that write errors will
never occur. Please use this test just as a guide.
2. Use to select “SD
press .
NEXT
108
H5 Handy Recorder
Other settings
5. When the amount of 6. To cancel testing, press .
109
Updating the firmware
Other functions
NOTE
You can download the file for the latest firmware version
update from the ZOOM website (www.zoom.co.jp). NOTE
Updating the firmware is not possible when the remain-
ing battery power is too low. If this is the case, install new
batteries or use an AC adapter.
2. Insert the SD card into the . Then, turn it on
while pressing .
3. Use to select
NOTE
Do not turn the power off or remove the SD card during a
firmware version update. Doing so could make the
unstartable.
110
H5 Handy Recorder
Using SD cards from older H series recorders
Other functions
An SD card that has been used in an older ZOOM H series recorder can be read by an and its files moved for its use.
111
Using a remote control
Other functions
112
H5 Handy Recorder
Troubleshooting
Appendices
If you think that the is not operating properly, please check the following first.
Troubleshooting
The sound from a connected device or mic cannot be • Confirm that the volume levels of the L/R and 1/2 tracks are not
heard or is very quiet turned down. ( P. 48)
• Confirm that the SD card has open space. ( P. 105)
• If you are using the included XY mic, confirm that the mic
orientation is suitable.
Other trouble
• Check the input level setting. ( P. 22)
• If connecting a CD player or other device to an input jack, try Not recognized by a computer when connected by USB
raising the output level of that device. • Check that the OS of the computer is compatible. ( P. 70)
• Check the input signal monitoring setting. ( P. 82) • An operation mode must be selected on the to allow a
• Check the plug-in power setting. ( P. 97) computer to recognize it. ( P. 70)
• Check the PAD function setting. ( P. 98)
113
Specifications
Appendices
Inputs
Backup input Set L/R input gain –12 dB
Connectors XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot)
Input gain (PAD OFF) –∞ to 55 dB
Input gain (PAD ON) –∞ to 35 dB
Input impedance 1.8 kΩ or more
1/2 INPUTS
Maximum allowable input level +22 dBu (PAD ON)
Phantom power +12/+24/+48 V (can be turned ON/OFF independently for INPUTS 1/2)
Equivalent input noise (EIN) –120 dBu or less
LINE OUT stereo mini jack (rated output level –10 dBm when output load impedance is 10 kΩ or more)
Out- Output jacks
PHONE OUT stereo mini jack (20 mW + 20 mW into 32Ω load)
puts
Built-in speaker 400mW/8Ω mono speaker
STEREO FILE mode
Supported WAV formats: 44.1/48/96kHz, 16/24-bit, stereo, BWF format supported
Supported MP3 formats: 48–320 kbps, 44.1kHz sampling frequency
Recording formats Maximum simultaneous recording tracks 4 tracks (L/R + backup recording)
MULTI FILE mode
Supported formats: 44.1/48kHz, 16/24-bit, mono/stereo, BWF format supported
Maximum simultaneous recording tracks 6tracks (L/R + 1/2 +backup recording)
Display LCD (128 x 64) with backlight
114
H5 Handy Recorder
Appendices
Mass storage class operation
Class: USB 2.0 High Speed
Audio interface operation: MULTI TRACK mode (Note: Use with Windows requires a driver, but Mac OS does not)
Class: USB 2.0 High Speed
Specifications: 4 in/2 out, 44.1/48kHz sampling rate, 16/24-bit bit rate
USB
Audio interface operation: STEREO mode (no driver required)
Class: USB 2.0 Full Speed
Specifications: 2 in/2 out, 44.1/48kHz sampling rate, 16-bit bit rate
Specifications
Note: Use as an iPad audio interface supported (STEREO mode only)
Note: USB bus power operation possible
STEREO FILE mode
Approximate continuous XY mic, 44.1kHz/16-bit (stereo x 1): about 15 hours
operation times when MULTI FILE mode
recording using battery
XY mic, Inputs 1 and 2, 48kHz/24-bit (stereo × 2): about 7 hours 10 minutes
power
Note: The above times are estimates.
(in hours and minutes)
Note: Approximate continuous recording times when using battery power were calculated using our own testing method. They may
differ greatly depending on operating conditions.
Operates using 2 AA batteries
Power AC adapter : DC5V 1A AD-17
USB bus power
Main unit: 66.8 mm (W) × 135.2 mm (D) × 42.1 mm (H), 176 g
Dimensions
XYH-5: 65.5 mm (W) × 62.2 mm (D) × 41.0 mm (H) 94 g
115
For EU Countries
FCC regulation warning (for U.S.A.)
Declaration of Conformity
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
ZOOM CORPORATION
4-4-3 Surugadai, Kanda, Chiyoda-ku, Tokyo
101-0062 Japan
http://www.zoom.co.jp
Z2I-2111-0
Z2I-2283-01
Ver.2.0
録音開始時や終了時にトーン信号を鳴らす[サウンドマーカー]
システムバージョン 2.0 より機能が追加されました。
録音開始時や終了時に、出力端子からトーン信号(サウンドマーカー)を鳴らすことができます。
動画の音声を で録音する場合、カメラ側の音声にトーン信号を入力しておくことで、動画との位置合わせが簡単になります。
■「MODE」を選択
1. を押す
でサウンドマーカーを鳴ら
2. で「REC」を選択して、
す条件を選択して、 を押す
を押す
NOTE
録音モードが MULTI FILE
モードの場合 ・ 追加録音機能やボイスメモ機能を使用しているときは、サウンドマーカーは
鳴りません。
■「LEVEL」を選択
4. で各メニューを選択して、
でサウンドマーカーの音量
を押す
を設定して、 を押す
Ver.2.0
Outputting tone signals when starting and stopping recording (sound marker function)
With system version 2.0, this function has been added.
When starting and stopping recording, the can output tone signals (sound markers).
When recording audio for video with the , by inputting tone signals into the camera recording, aligning the audio with the video will be easier.
1. Press
Setting the "MODE"
NOTE
When using MULTI FILE Markers will not be output when the overdubbing or voice memo functions is
recording mode in use.
Ver.2.0
Ausgabe von Signaltönen beim Starten und Beenden der Aufnahme (Sound Marker)
In der System-Version 2.0 wurde eine weitere Funktion integriert.
Der kann beim Starten und Beenden der Aufnahme Signaltöne (Sound Marker) ausgeben.
Wenn Sie den für Tonaufnahmen für Videos einsetzen, können Sie Signaltöne in den Kameraton einspeisen, sodass sich Audio-
und Videomaterial später einfacher synchronisieren lassen.
1. Drücken Sie
Auswahl des Modus (MODE)