Professional Documents
Culture Documents
for weldinga
European (internationalb) standards for fusion welding Destructive testing
Other continued
Arc welding Copper Nickel Titanium & Zirconium Impact EN 875 (ISO 9016)
EN ISO 3834
Steel Aluminium Symbolic repr. ISO 2553
EN ISO 9606-3 EN ISO 9606-4 EN ISO 9606-5 Tensile long. EN 876 (ISO 5178)
Grouping of materials CEN ISO/TR 15608, 20172, 20173, 20174
Proc. numbers EN ISO 4063
Tensile perp. EN 895 (ISO 4136)
Welder qualification EN 287-1 (ISO 9606-1) EN ISO 9606-2 Gas welding Electron beam welding Laser welding
Terms & Def. CEN/TR 14599
EN ISO 15609-2 EN ISO 15609-3 EN ISO 15609-4 (ISO/TR 25901) Tensile cruc. EN ISO 9018
WPS EN ISO 15609-1
Def. weld proc. EN 14610 Bend EN ISO 5173
Welding procedure qualification EN ISO 15607, 15610, 15611, 15612, 15613 Cast iron Titanium & Zirconium Copper
Terms on joints EN ISO 17659 EN 1320 (ISO 9017)
Fracture
EN ISO 15614-3 EN ISO 15614-5 EN ISO 15614-6 & welds
EN ISO 15614-1 EN ISO 15614-2 & -4
Tolerances EN ISO 13920 Hardness EN 1043-1 & -2
Welding operator qualification EN 1418 (ISO 14732) (ISO 9015-1 & -2)
Overlay welding Tube to tube plate Beam welding
Welding EN ISO 6947,
NDT-personnel EN 473 (ISO 9712) EN ISO 15614-7 EN ISO 15614-8 EN ISO 15614-11 positions CEN/TR 14633 Macroscopic EN 1321 (ISO 17639),
CR 12361 (ISO/TR 16060)
Welding coordination EN ISO 14731 Reinforcing steel EN ISO 17660
Clad steel Laser Electron beam Cast iron Hot crack EN ISO 17641-1, -2 & -3
Inspection & testing during welding EN ISO 13916 EN 1011-5 EN 1011-6 EN 1011-7 EN 1011-8
- Measurement of preheat and (ISO/TR 17671-5) (ISO/TR 17671-6) (ISO/TR 17671-7) (ISO/TR 17671-8) Cold crack EN ISO 17642-1, -2 & -3
Welding consumables
interpass temp. EN 1011-2 & -3 EN 1011-4
Product EN 13479 Delta ferrite EN ISO 17655
- Recommendations for welding (ISO/TR 17671-2 & -3) (ISO/TR 17671-4) Environment, health & safety
- Comparison of methods for EN ISO 15011-1 till -4 & CEN Quality req. for EN 12074
CEN ISO/TR 17844) Fume sampling in
avoidance of cold cracks ISO/TR 15011-5 manufacturing
laboratory Acceptance levels for NDT
Technical deli- EN ISO 544
Inspection & testing after welding EN 12062 (ISO 17635) Fume sampling in very conditions
EN ISO 10882-1 & -2 Radiography EN 12517-1 (ISO 10675)
- NDT – General rules breathing zone
EN 970 (ISO 17637) Procurement EN ISO 14344
- Visual testing Filters EN ISO 15012-1 & -2 Ultrasonic EN 1712 (ISO 11666c),
EN 1435 (ISO 17636-1 & -2) Type testing EN 14532-1, -2 & -3 EN ISO 23279
- Radiographic testing
EN 1714 (ISO 17640) Eye protection EN 169, 170 & 171
- Ultrasonic testing Testing EN ISO 15792-1, -2 & -3, 6847, 14372, Magnetic particle EN ISO 23278
- Magnetic particle testing EN ISO 17638 8249, 3690 & ISO 2401
Protective clothing EN ISO 11611, EN 12477
Penetrant EN ISO 23277
- Macro- & microscopic testing EN 1321 (ISO 17639)
EN 1598 TIG-electrodes EN ISO 6848
Welding curtains
- Penetrant testing (general) EN 571-1 (ISO 3452-1) Visual testing (+ For all imperfections EN ISO
Environm. checklist EN 14717 Hard facing EN 14700 macro/micro etc) 5817 etc apply
Post-weld heat treatment CR ISO/TR 17663
Thermal cuts EN 12584 (ISO ’missing’) EN ISO EN ISO EN ISO prEN ISO
Cored wires EN ISO 17632
18276 17634 17633 12153c
EN ISO
Designation system CEN ISO/TS 17845 1071
EN 12536 EN 12536
Gas welding (ISO ‘missing’) (ISO ’missing’)
See continued
a
References in fields with this colour are directly linked to EN ISO 3834 (ex EN 729)
b
Shielding gas EN ISO 14175
The ISO-reference in brackets is in most cases identical with or is based on corresponding EN
c
Not published November 2010 Update available at www.svets.se/overview Mathias Lundin, Swedish Welding Commission, November 2010