Professional Documents
Culture Documents
Brochure Energy Storage en Web
Brochure Energy Storage en Web
INDEX
Introduction4
Why choose Victron Energy for your Energy Storage system 6
Application example: Tiny House 8
Application example: Smartflower 9
Which system to choose 10
Monitoring12
Tools14
Accessories15
Technical information 19
About Victron Energy 58
3
Introduction
For a self-consumption system this is different, as there is When considering battery capacity, a self-consumption
always a grid present. With Grid assist functionality the grid system is able to work with a smaller battery capacity. The
can be used seamlessly, whenever there is a high peak load, energy stored in such a system is limited to the surplus PV
meaning the inverter can be sized according to the base load. power as part of the generated PV power is directly used by
the loads. In this case PV power is sized according to the base
The baseload is the part of the total energy-need which load and any surplus energy is used overnight.
generally comes from low powered equipment and these
loads continue to draw energy almost constantly over the 24 More information:
hours of a day. https://www.victronenergy.com/upload/documents/
Whitepaper-Self-Consumption-and-Grid-independence-
with-the-Victron-Energy-Storage-Hub-EN.pdf
4
Energy. Anytime. Anywhere.
5
Why choose Victron Energy for your Energy Storage system
6
Energy. Anytime. Anywhere.
T H E S A LT WAT E R B AT T E R Y
7
Application example: Tiny House
Tiny House
This is an application example of a Tiny House. Tiny Houses are very small homes that enable simple living in a smaller, more
efficient space. They are usually made of wood, being creatively designed to maximise the utility of a small living space. The
principal reasons for living in a Tiny House are to live sustainably in a financially and environmentally conscious way, whilst at
the same time enjoying the resulting freedom.
The Tiny House in the photograph belongs to Marjolein Jonker. She lives in The Netherlands and has built her own Tiny House,
together with a team of specialists.
Victron equipment
The Tiny house of Marjolein is equipped with:
• EasySolar
• 2 x 90A Lithium-ion batteries
• BMV-700 Battery Monitor
• Color Control GX
For additional information about Marjolein Jonker's Tiny House please visit: https://www.marjoleininhetklein.com/
USB
Ve Bus
AC Loads
Ve Direct
Ve Bus Ve Direct
VeBus BMS
8
Energy. Anytime. Anywhere.
Smartflower POP+
This is an application example of the Smartflower. The
Smartflower POP+ can not only turn the sun's energy into
electricity very efficiently; it can store it in sufficient quantities
too.
Charger/inverter
VenusGX
VeBus BMS
Battery Monitor
AC Loads
Lithium battery 48Vdc
9
Which system to choose
There is a solution for every situation, from simple to more complex solutions. We have different options available: PV in parallel,
AC-Coupled PV, DC-Coupled PV or a combination of all these options.
Option 1: PV in parallel
Most practical solution to add battery storage to an existing grid
connected PV system.
Option 2: AC-Coupled PV
10
Energy. Anytime. Anywhere.
Option 3: DC-Coupled PV
The size of the PV array and the PV inverter is not limited by the
maximum nominal power of the inverter/charger.
11
Monitoring
The major considerations for installing a self-consumption system are often financially and/or morally driven. For both, the goal
is to minimise the import of grid energy and to optimise the consumption of self-generated power.
Modern inverter and battery monitoring technology helps to achieve this, by detecting how much energy to store and how and
when to best use it. Besides this there is another important factor to consider.
This factor is the energy behaviour of the end-user themselves. This can differ between households and it is heavily dependent
on circumstances, which can change from day to day. This makes coding the software, to precisely achieve optimal use of
energy, quite a challenge.
If for example the washing machine is required on a particular day, the ideal day would be a sunny one just after the battery is
(almost) full. Having said that direct power usage is preferable, which saves having to export energy to the grid or use battery
power momentarily.
In order to be able to make these kinds of energy use decisions, monitoring is crucial to fine tune and optimise energy use based
on ever changing circumstances. This makes monitoring systems an essential feature for every self-consumption system. Tests
have shown that users of self-consumption systems with monitoring score a much higher level of self-consumption than those
systems which lack it.
12
Energy. Anytime. Anywhere.
Victron Energy self-consumption systems can offer the best of both worlds
By using a Color Control GX, with its easy to use display, a clear system overview will show all
the details needed to make crucial decisions as to which loads to use or to delay. Behind the
overview screens other advanced information can be found - enough to satisfy even the most
data-hungry users.
Venus GX
The Venus GX provides the same functionality as the Color Control GX, with a few extras:
- lower cost, mainly because it has no display or buttons
- 3 tank sender inputs
- 2 temperature inputs
Color Control GX
VRM Online Portal
All this data is automatically sent to our free remote monitoring website: the VRM Online Portal,
which allows even more options. It provides data analysis via the free VRM app which can be
used on virtually every smartphone, so even when away from the Color Control GX the system
can be easily monitored. Also the webserver is able to provide an advanced system overview,
such as calculations of total solar yield, power generation and graphs - for all the equipment
connected to the system.
VRM app
13
Tools
There are a lot of tools available that make it easy to work with Victron Energy products, for both Victron installers as Victron
distributors. Whether you would like to configure and read out your Victron products with VictronConnect using your
smartphone, tablet or computer or you want to show or share your VRM site.
ESS Webinar
There is a webinar about ESS available on our youtube channel,
in the languages English, Spanish, German and French.
Victron Professional
With Victron Professional you can get insight into training
sessions, videos, firmware files, APIs and the latest news. If you
already use E-Order you can login with those credentials.
14
Energy. Anytime. Anywhere.
Accessories
Our systems are comprised of various components. Some of which are specifically designed for specific markets. Other
Victron components are applicable for a wide range of applications. You are able to find the specifications and other detailed
information about these components in the ‘Technical Information’ section.
Battery Monitor
Key tasks of the Victron Battery Monitor are measuring charge
and discharge currents as well as calculating the state-of-charge
and time-to-go of a battery. An alarm is sent when certain limits
are exceeded (such as an excessive discharge). It is also possible
for the battery monitor to exchange data with the Victron Global
Remote. This includes sending alarms.
Color Control GX
The Color Control GX provides intuitive control and monitoring
for all products connected to it. The list of Victron products that
can be connected is endless: Inverters, Multis, Quattros, MPPT
150/70, BMV-700 series, Skylla-i, Lynx-Ion and even more.
Venus GX
The Venus GX provides the same functionality as the Color Control
GX, with a few extras:
- lower cost, mainly because it has no display or buttons
- 3 tank sender inputs
- 2 temperature inputs
Octo GX
The Octo GX is the communication-centre of your installation. It
connects the components together and ensures they are working
in harmony. Monitoring of live data, and changing settings is
performed by using your smartphone (or other device) via our
free-to-use Victron Remote Management Portal, VRM.
15
Accessories
MPPT Control
The MPPT Control lets you see the status as well as setup all
BlueSolar and SmartSolar MPPT Charge Controllers that have
a VE.Direct communications port. The new MPPT Control is
mounted in the familiar BMV-700 series housing, maintaining
a consistent and professional look to your panels and systems
monitoring equipment.
Energy Meter
The ET112 (for single phase max. 100A) and the ET340 (for three
phase max. 65A) Energy Meters are typically used in an Energy
Storage System. To measure the power and energy of the whole
application at the distribution box. Or to measure the output of
a PV Inverter, to display the data on the Color Control GX and the
VRM Portal.
16
Energy. Anytime. Anywhere.
17
Note - for our newest datasheets please refer to our website:
www.victronenergy.com
TECHNICAL INFORMATION
EasySolar 12V and 24V, 1600VA 20
EasySolar 3kVA & 5kVA with Color Control panel 22
MultiPlus-II 3000VA & 5000VA 24
MultiPlus-II GX 3000VA 26
Phoenix inverters Smart 1600VA - 5000VA 30
Phoenix inverters 1200VA - 5000VA 230V 32
MultiPlus inverter/charger 800VA - 5kVA 230V 34
Quattro inverter/charger 3kVA - 15kVA 230V 36
MultiPlus inverter/charger 2kVA and 3kVA 120V 38
Quattro inverter/charger 3kVA - 10kVA 120V 40
Cerbo GX & GX Touch 50 42
Color Control GX 44
Venus GX 48
BMV-712 Smart: Bluetooth inside 50
BlueSolar and SmartSolar MPPT Charge Controllers - Overview 52
SmartSolar charge controller MPPT 75/10, 75/15, 100/15 & 100/20 53
SmartSolar charge controller MPPT 100/30 & 100/50 54
SmartSolar charge controller MPPT 150/35 & 150/45 55
SmartSolar charge controller MPPT 150/45 - MPPT 150/100 56
SmartSolar charge controller MPPT 250/60 - 250/100 57
1818
Energy. Anytime. Anywhere.
1919
EasySolar 12V and 24V, 1600VA
www.victronenergy.com
EasySolar
The 12V and
all-in-one 24V,
solar 1600VA
power solution
z
A l l - i n - o n e s o l a r p o w e r s o l u t io n
The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution
in one enclosure.
The product is easy to install, with a minimum of wiring.
T h e s o l a r c h ar g e c o nt r o l l e r : Bl u e S o l ar M P P T 1 0 0 / 5 0
Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.
T h e i n v e r t e r / c ha r g e r : M u l t i P l u s C o m p a c t 1 2/ 1 6 0 0 / 7 0 o r 2 4/ 1 6 0 0 / 4 0
The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery
cables (included). The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC
power (inverter/charger) from the utility grid or a genset.
A C d ist r ib u t io n
The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A
and two 16A circuit breakers.
One 16A output is controlled by the AC input: it will switch on only when AC is available.
Po wer A ssist
Unique PowerAssist technology protects the utility or generator supply from being overloaded
by adding extra inverter power when needed.
U n i q u e s o l a r a p p l i c a t io n s o f t w a r e
Several software programs (Assistants) are available to configure the system for various grid
interactive or stand-alone applications. Please see
http://www.victronenergy.nl/support-and-downloads/software/
V E . D ir e c t
MPPT 1 0 0 |5 0
20
Energy. Anytime. Anywhere.
21
EasySolar 3 kVA & 5 kVA with Color Control panel
EasySolar 3kVA &solar
5kVA power
with Color Control panel www.victronenergy.com
The all-in-one solution
T h e a l l - i n - o n e s o la r p ow e r s o l u t i on
The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution
in one enclosure.
The product is easy to install, with a minimum of wiring.
C o l o r C o nt r o l pan e l
Two outstanding functions:
- Prioritizes battery charging by the MPPT charge controller
- Connects to the internet, enabling remote monitoring (VRM website) and remote control.
A C d i s t r i b ut i o n
The AC distribution consists of a RCD (30mA / 63A) and four AC outputs protected by two 10A
and two 16A circuit breakers.
An additional 16A output is controlled by the AC input: it will switch on only when AC is available.
P o w e r A s s is t
Unique PowerAssist technology protects the utility or generator supply from being overloaded
by adding extra inverter power when needed.
U n i q ue s o l a r a p p l i c a t i o n s o f t w a r e
Several software programs (Assistants) are available to configure the system for various grid
interactive or stand-alone applications. Please see
http://www.victronenergy.nl/support-and-downloads/software/
E a s y S o l a r 5 kV A
22
Energy. Anytime. Anywhere.
23
MultiPlus-II Inverter/Charger Victron online product page
MultiPlus-II 3000VA & 5000VA
\ 24/3000/70-32, 48/3000/35-32 & 48/5000/70-50
MultiPlus-II https://ve3.nl/6H
A M u l t i P l u s , p l u s E S S ( E n e r g y S t o ra g e S y s t e m ) f un c t i o n a l i t y
The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external
current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A.
The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications.
It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application.
Several system configurations are possible. For more detailed information see the ESS Design and configuration manual.
P o w e r C on t r o l a n d P o w e r A s s i s t - B oo s t i n g t h e c a p a c i t y o f t h e g r i d o r a g e n e r a t o r
A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use
whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl
function).
PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a
limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery.
When the load reduces, the spare power is used to recharge the battery.
S o l a r e n e r g y : A C p ow e r a v a i l a b l e e v e n d u r i n g a g r i d f a i l u r e
The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is
compatible with both solar charger controllers and grid-tie inverters.
T w o A C O u t p ut s
The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of
a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that
computers and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the
battery, like a water heater for example, can be connected to this output.
V i r t u a l l y un l i m i t e d p o w e r t h a n k s t o p a r a l l e l a n d t h r e e p h a s e o p e r a t i o n
Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide
25 kW / 30 kVA output power with 420 Amps charging capacity.
In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not
all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging
capacity.
O n - s i t e s y s t e m c o n f i g u r i n g , m on i t o r i n g a n d c on t r o l
Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface
needed).
Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop,
computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.
R e m o t e c o n f i g u r i n g a n d m on i t o r i n g
Install a Color Control GX or other GX product to connect to the internet.
Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
When connected to the internet, systems can be accessed remotely, and settings can be changed.
24
Energy. Anytime. Anywhere.
Standard marine, mobile or off-grid application Standard mobile or off-grid application with external current sensor
Loads that should shut down when AC input power is not available can be Maximum current sensing range: 50 A resp 100 A
connected to a second output (not shown). These loads will be taken into
account by the PowerControl and PowerAssist function in order to limit AC input
current to a safe value when AC power is available.
Grid parallel topology with MPPT solar charge controller Grid in-line topology with PV inverter
The MultiPlus-II will use data from the external AC current sensor (must be PV power is directly converted to AC.
ordered separately) or power meter to optimise self-consumption and, if The MultiPlus-II will use excess PV power to charge the batteries or to feed power back
required, to prevent grid feed. In case of a power outage, the MultiPlus-II will into the grid, and will discharge the battery or use power from the grid to supplement
continue to supply the critical loads a shortage of PV power. In case of a power outage, the MultiPlus-II will disconnect the
grid and continue to supply the loads.
26
Energy. Anytime. Anywhere.
29
Phoenix Inverters Smart
www.victronenergy.com
Phoenix
1600 VA inverters
– 5000 VASmart 1600VA - 5000VA
VE. Di r e c t c o m m u n i c a ti o n po r t
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to
configure and monitor the same parameters.
Phoenix Inverter
S m a r t 1 2 /3 0 0 0 Pr o v en r elia bility
The full bridge plus toroidal transformer topology has proven its reliability over many years.
The inverters are short circuit proof and protected against overheating, whether due to overload
or high ambient temperature.
Hi gh sta r t- u p po w e r
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
EC O mo d e
When in ECO mode, the inverter will switch to standby when the load decreases below a preset
value. Once in standby the inverter will switch on for a short period every 2,5 seconds
(adjustable).
If the load exceeds the preset level, the inverter will remain on.
R emo te o n/o ff
A remote on/off switch or relay contact can be connected to a two pole connector.
Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or
the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis
of a vehicle, for example).
L ED d i a gn o si s
Please see manual for a description.
30
Energy. Anytime. Anywhere.
C o l o r C o n t r o l G X a n d o t h e r G X de v i c e s
Provides monitoring and control.
Locally, and remotely on the VRM Portal.
S i n u s M a x - S u p e r i o r e n g in e e r in g
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications.
The design criteria have been to produce a true sine wave inverter with optimized efficiency but without
compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact
dimensions, light in weight and capable of supplying power, problem-free, to any load.
E x t r a s t a r t - u p p ow e r
A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency
technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up
difficult loads such as refrigeration compressors, electric motors and similar appliances.
C o m m u n i c a t i on s i n t e r f a c e
These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3-
USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software,
which can be downloaded free of charge from our website, parameters of the inverters can be customized. This
includes output voltage and frequency, over and under voltage settings and programming the relay. This relay
can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be
connected to a GX device (eg Cerbo GX) for monitoring and control.
N e w a p p l i c a t i on s o f h i g h p o w e r i n v e r t e r s
The possibilities of paralleled high power inverters are truly amazing. For ideas, examples and battery capacity
calculations please refer to our book ‘Energy Unlimited’ (available free of charge from Victron Energy and
downloadable from www.victronenergy.com).
32
Energy. Anytime. Anywhere.
C o m p u t e r c on t r o l l e d o p e r a t i on a n d m o n i t o r i n g
Several interfaces are available:
C o l o r C o nt r o l G X
Provides monitor and control. Locally, and also remotely
Phoenix Inverter Control on the VRM Portal. B M V - 7 0 0 B a t t e r y Mo n i t o r
This panel can also be used on a The BMV-700 Battery Monitor features an
MultiPlus Inverter/Charger when an advanced microprocessor control system
automatic transfer switch but no combined with high resolution
charger function is desired. MK3-USB VE.Bus to USB interface measuring systems for battery voltage
The brightness of the LEDs is Connects to a USB port (see ‘A guide to VEConfigure’) and charge/discharge current. Besides
automatically reduced during night this, the software includes complex
time. calculation algorithms, like Peukert’s
formula, to exactly determine the state of
charge of the battery. The BMV-700
selectively displays battery voltage,
current, consumed Ah or time to go. The
V E . B u s t o N M E A 2 0 0 0 in t e r f a c e monitor also stores a host of data
Connects the device to a NMEA 2000 marine electronics regarding performance and use of the
network. See the NMEA 2000 & MFD integration guide battery.
T wo A C O u t p u t s
The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a
grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers
and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the
battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA
and more).
V i r t u a l l y u n l i m i t e d p o w e r t h a nk s t o p a r a l l e l o p e r a t i o n
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide
25 kW / 30 kVA output power with 720 Amps charging capacity.
Three phase capability
In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all:
up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging
capacity.
P o w e r C o n tr o l - D e a l i n g w i t h l i m i t e d g e n e r a t o r , s h o r e s i d e o r g r i d p o w e r
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side
Mult iPlus supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be
2 4 / 30 00 / 7 0 set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the
generator or shore supply from being overloaded.
P o w e r A s s i s t - B o o s t i n g t he c a p a c i t y o f s h o r e o r g e ne r a t o r p o w e r
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity
of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that
insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces,
the spare power is used to recharge the battery.
S o l a r e ne r g y : A C p o w e r a v a i l a b l e e v e n d u r i n g a g r i d f a i l u r e
The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems.
Loss of mains detection software is available.
S y s t e m c o nf i g u r i n g
- In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a
DIP switch setting procedure.
- Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System
Configurator software.
- Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers
can be configured with Assistants (dedicated software for specific applications).
O n - s i t e M o ni t o r i n g a n d c o n t r o l
Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or
tablet (Bluetooth Smart), laptop or computer (USB or RS232).
M u l t i P l u s Co m p a c t R e m o t e Mo n i t or i n g a n d c o n t ro l
1 2 / 20 00 / 8 0 Color Control GX or other GX devices.
Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be
changed remotely.
C o l o r C o n t r o l G X , s h o w in g a
P V a p p l i c a t i on
34
Energy. Anytime. Anywhere.
C o m p u t e r c on t r o l l e d o p e r a t i on a n d m o n i t o r i n g
Several interfaces are available:
C o l o r C o nt r o l G X an d o th e r GX
D i g i t a l M u lt i C o n t r o l P a n e l de v i ce s
A convenient and low cost solution for remote Monitoring and control. Locally, and also
monitoring, with a rotary knob to set remotely on the VRM Portal.
PowerControl and PowerAssist levels. B M V - 7 1 2 S ma r t B a t t e r y
M o n i to r
Use a smartphone or other
M K 3 -U S B ( V E . B u s t o U S B in t e r fa c e ) Bluetooth enabled device to:
Connects to a USB port (see ‘A guide to
VEConfigure’)
- customize settings,
- monitor all important data
V E . B u s S ma r t D o n g l e on single screen,
Measures battery voltage - view historical data, and to
and temperature and allows - update the software when
monitoring and control of V E . B u s t o N M E A 2 0 0 0 in t e r f a c e
new features become
Multis and Quattros with a Connects the device to a NMEA2000 marine
smartphone or other electronics network. See the NMEA2000 & MFD available.
integration guide
Bluetooth enabled device.
T w o A C i n p u t s w i t h i n t e g r a t e d t r a n s f e r sw i t c h
The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two
generators. The Quattro will automatically connect to the active source.
T wo A C O u t p u t s
The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a
grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that
computers and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge
the battery, like a water heater for example, can be connected to this output.
V i r t u a l l y u n l i m i t e d p o w e r t h a nk s t o p a r a l l e l o p e r a t i o n
Up to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 48kW / 60kVA output
power and 840 Amps charging capacity.
S p l i t p ha s e o p t i o n s
Two units can be stacked to provide 120-0-120V, and additional units can be paralleled up to a total of 6 units per
phase, to supply up to 30kW / 36kVA of split phase power.
Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on
www.victronenergy.com) to a ‘European’ inverter programmed to supply 240V / 60Hz.
Q u at t r o
Three phase capability
4 8 / 50 00 / 7 0- 1 00 / 10 0
Three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel
connected to provide 144kW / 180kVA inverter power and more than 2500A charging capacity.
P o w e r C o n tr o l – D e a l i n g w i t h l i m i t e d g e n e r a t o r , s h o r e s i d e o r g r i d p o w e r
The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side
supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then take
account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from
being overloaded.
P o w e r A s s i s t – B o o s t i n g s h o r e o r g e ne r a t o r p o w e r
This feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the
capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will
make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When
the load reduces, the spare power is used to recharge the battery.
S o l a r e ne r g y : A C p o w e r a v a i l a b l e e v e n d u r i n g a g r i d f a i l u r e
The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems.
Loss of mains detection software is available.
S y s t e m c o nf i g u r i n g
- In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with
a DIP switch setting procedure.
Q u at t r o - Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System
Configurator software.
4 8 / 1 5 0 0 0 / 2 0 0 -1 0 0 / 1 0 0
- Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar
Chargers can be configured with Assistants (dedicated software for specific applications).
O n - s i t e M o ni t o r i n g a n d c o n t r o l
Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or
tablet (Bluetooth Smart), laptop or computer (USB or RS232).
R e m o t e Mo n i t or i n g a n d c o n t ro l
Color Control GX or other GX devices.
Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can
be changed remotely.
C o l o r C o n t r o l G X , s h o w in g a
P V a p p l i c a t i on
36
Energy. Anytime. Anywhere.
12/5000/220-10 0/100
12/3000/120-50 /50 24/8000/200-10 0/100
Q u at t r o 24/3000/70-50 /50
24/5000/120-10 0/100
48/8000/110-10 0/100
48/10000/140-1 00/100 48/15000/200-1 00/100
48/5000/70-100 /100
PowerControl / PowerAssist Yes
Integrated Transfer switch Yes
AC inputs (2x) Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Power factor: 1
Maximum feed through current (A) 2x 50 2x100 2x100 2x100 2x100
INVERTER
Input voltage range (V DC) 9,5 – 17V 19 – 33V 38 – 66V
Output (1) Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1%
Cont. output power at 25°C (VA) (3) 3000 5000 8000 10000 15000
Cont. output power at 25°C (W) 2400 4000 6500 8000 12000
Cont. output power at 40°C (W) 2200 3700 5500 6500 10000
Cont. output power at 65°C (W) 1700 3000 3600 4500 7000
Peak power (W) 6000 10000 16000 20000 25000
Maximum efficiency (%) 93 / 94 94 / 94 / 95 94 / 96 96 96
Zero load power (W) 20 / 20 30 / 30 / 35 60 / 60 60 110
Zero load power in AES mode (W) 15 / 15 20 / 25 / 30 40 / 40 40 75
Zero load power in Search mode (W) 8 / 10 10 / 10 / 15 15 / 15 15 20
CHARGER
Charge voltage 'absorption' (V DC) 14,4 / 28,8 14,4 / 28,8 / 57,6 28,8 / 57,6 57,6 57,6
Charge voltage 'float' (V DC) 13,8 / 27,6 13,8 / 27,6 / 55,2 27,6 / 55,2 55,2 55,2
Storage mode (V DC) 13,2 / 26,4 13,2 / 26,4 / 52,8 26,4 / 52,8 52,8 52,8
Charge current house battery (A) (4) 120 / 70 220 / 120 / 70 200 / 110 140 200
Charge current starter battery (A) 4 (12V and 24V models only)
Battery temperature sensor Yes
GENERAL
Auxiliary output (A) (5) 25 50 50 50 50
Programmable relay (6) 3x 3x 3x 3x 3x
Protection (2) a-g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
General purpose com. port 2x 2x 2x 2x 2x
Remote on-off Yes
Common Characteristics Operating temp.: -40 to +65˚C Humidity (non-condensing): max. 95%
ENCLOSURE
Common Characteristics Material & Colour: aluminium (blue RAL 5012) Protection category: IP 21
Battery-connection Four M8 bolts (2 plus and 2 minus connections)
Screw terminals 13 mm2
230 V AC-connection (6 AWG)
Bolts M6 Bolts M6 Bolts M6 Bolts M6
Weight (kg) 19 34 / 30 / 30 45 / 41 51 72
470 x 350 x 280
Dimensions (hxwxd in mm) 362 x 258 x 218 444 x 328 x 240 470 x 350 x 280 470 x 350 x 280 572 x 488 x 344
444 x 328 x 240
STANDARDS
Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1
Emission, Immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Road vehicles 12V and 24V models: ECE R10-4
Anti-islanding See our website
1) Can be adjusted to 60 HZ. 120 V models available on request 3) Non-linear load, crest factor 3:1
2) Protection key: 4) At 25˚C ambient
a) output short circuit 5) Switches off when no external AC source available
b) overload 6) Programmable relay that can a.o. be set for general alarm,
c) battery voltage too high DC under voltage or genset start/stop function
d) battery voltage too low AC rating: 230 V / 4 A
e) temperature too high DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC
f) 230 VAC on inverter output
g) input voltage ripple too high
C o m p u t e r c on t r o l l e d o p e r a t i on a n d m o n i t o r i n g
Several interfaces are available:
C o l o r C o nt r o l G X an d o th e r GX
D i g i t a l M u lt i C o n t r o l P a n e l de v i ce s
A convenient and low cost solution for remote Monitoring and control. Locally, and also
monitoring, with a rotary knob to set remotely on the VRM Portal.
PowerControl and PowerAssist levels. B M V - 7 1 2 S ma r t B a t t e r y
M o n i to r
Use a smartphone or other
M K 3 -U S B ( V E . B u s t o U S B in t e r f a c e ) Bluetooth enabled device to:
Connects to a USB port (see ‘A guide to - customize settings,
VEConfigure’) - monitor all important data
V E . B u s S ma r t D o n g l e on single screen,
Measures battery voltage - view historical data, and to
and temperature and allows - update the software when
monitoring and control of V E . B u s t o N M E A 2 0 0 0 in t e r f a c e new features become
Multis and Quattros with a Connects the device to a NMEA2000 marine available.
smartphone or other electronics network. See the NMEA2000 & MFD
Bluetooth enabled device. integration guide
37
www.victronenergy.com
MultiPlus Inverter/Chargers 2 kVA and 3 kVA
MultiPlus inverter/charger
(120 V/60 Hz) Lithium-Ion 2kVA
battery and 3kVA 120V
compatible Lithium Ion battery compatible
M u l t i f u n c t i o na l , w i t h i n t e l l i g e n t p o w e r m a n a g e m e n t
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge
technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the
MultiPlus has several advanced features, as outlined below.
T wo A C O u t p u t s
The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of
a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that
computers and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the
battery, like a water heater for example, can be connected to this output (second output available on models rated at
3kVA and more).
V i r t u a l l y u n l i m i t e d p o w e r t h a nk s t o p a r a l l e l o p e r a t i o n
Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide
15kW / 18kVA output power with 420 Amps of charging capacity.
S p l i t p ha s e o p t i o n s
Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per
phase, to supply up to 30 kW / 36 kVA of split phase power.
Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on
www.victronenergy.com) to a ‘European’ inverter programmed to supply 240 V / 60 Hz.
P o w e r C o n tr o l - D e a l i n g w i t h l i m i t e d g e n e r a t o r , s h o r e s i d e o r g r i d p o w e r
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side
supply (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel a maximum generator or shore
current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus
preventing the generator or shore supply from being overloaded.
P o w e r A s s i s t - B o o s t i n g t he c a p a c i t y o f s h o r e o r g e ne r a t o r p o w e r
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the
capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will
make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When
the load reduces, the spare power is used to recharge the battery.
F o u r s t a g e a d a p t i v e c h a r g e r a n d d u a l b a nk b a t t e r y c h a r g i n g
The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software.
The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage
for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger
datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second
battery using an independent trickle charge output intended for a main engine or generator starter battery.
M u l t i P l u s Co m p a c t
12/2000/80 S y s t e m c o nf i g u r i n g h a s n e v e r b e e n e a s i e r
After installation, the MultiPlus is ready to go.
If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even
parallel and 3-phase operation can be programmed with DIP switches: no computer needed!
Alternatively, VE.Net can be used instead of the DIP switches.
And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several
new, advanced, features.
P o w e r A s s i s t w i t h 2 x M u lt i P l u s i n p a r a l l e l F i v e p a r a l l e l un i t s : o u t p ut p o w e r 1 2 , 5 k W
38
Energy. Anytime. Anywhere.
C o m p u t e r c on t r o l l e d o p e r a t i on a n d m o n i t o r i n g
Several interfaces are available:
C o l o r C o n t r o l G X a n d o t h e r G X de v i c e s
Provides monitor and control. Locally, and also
D i g i t a l M u lt i C o n t r o l remotely on the VRM Portal.
A convenient and low cost solution for
remote monitoring, with a rotary knob to set
B M V - 7 1 2 S ma r t B a t t e r y
PowerControl and PowerAssist levels.
M o n i to r
Use a smartphone or other
MK3-USB VE.Bus to USB interface Bluetooth enabled device to:
Connects to a USB port (see ‘A guide to - customize settings,
VEConfigure’) - monitor all important data on
single screen,
V E . B u s S ma r t D o n g l e - view historical data, and to
Measures battery voltage - update the software when new
and temperature and allows features become available.
monitoring and control of
Multis and Quattros with a V E . B u s t o N M E A 2 0 0 0 in t e r f a c e
smartphone or other Connects the device to a NMEA2000 marine
Bluetooth enabled device. electronics network. See the NMEA2000 &
MFD integration guide
39
Quattro Inverter/Charger 120V
xxx
Quattro inverter/charger
3kVA - 10kVA 3kVA
Lithium Ion - 10kVA
battery 120V
compatible Lithium Ion battery compatible
www.victronenergy.com
T w o A C i n p u t s w i t h i n t e g r a t e d t r a n s f e r sw i t c h
The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two
generators. The Quattro will automatically connect to the active source.
T wo A C O u t p u t s
The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid
failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and
other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the
battery, like a water heater for example, can be connected to this output.
V i r t u a l l y u n l i m i t e d p o w e r t h a nk s t o p a r a l l e l o p e r a t i o n
Up to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 48kW / 60kVA output power
and 840 Amps charging capacity.
S p l i t p ha s e a nd t hr e e p ha s e c a p a b i l i t y
Two units can be configured for split phase, and three units can be configured for three phase output. But that’s not all: up to
6 sets of three units can be parallel connected to provide 144kW / 180kVA inverter power and more than 2500A charging
capacity. For more detail please enter parallel in the search box on our website.
P o w e r C o n tr o l – D e a l i n g w i t h l i m i t e d g e n e r a t o r , s h o r e s i d e o r g r i d p o w e r
A current limit can be set on each AC input. The Quattro will then take account of other AC loads and use whatever is spare for
charging, thus preventing the generator or mains supply from being overloaded.
P o w e r A s s i s t – B o o s t i n g s h o r e o r g e ne r a t o r p o w e r
This feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of
the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that
insufficient mains or generator power is immediately compensated for by power from the battery. When the load reduces, the
spare power is used to recharge the battery.
S o l a r e ne r g y : A C p o w e r a v a i l a b l e e v e n d u r i n g a g r i d f a i l u r e
The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems.
Loss of mains detection software is available.
S y s t e m c o nf i g u r i n g
Q u at t r o - In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP
4 8 / 50 00 / 7 0 - 1 00 / 10 0 switch setting procedure.
- Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator
software.
- Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers
can be configured with Assistants (dedicated software for specific applications).
O n - s i t e M o ni t o r i n g a n d c o n t r o l
Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet
(Bluetooth Smart), laptop or computer (USB or RS232).
R e m o t e Mo n i t or i n g a n d c o n t ro l
Color Control GX or other GX devices.
Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be
changed remotely.
C o l o r C o n t r o l G X , s h o w in g a
P V a p p l i c a t i on
40
Energy. Anytime. Anywhere.
C o m p u t e r c on t r o l l e d o p e r a t i on a n d m o n i t o r i n g
Several interfaces are available:
C o l o r C o nt r o l G X an d o th e r GX
D i g i t a l M u lt i C o n t r o l P a n e l de v i ce s
A convenient and low cost solution for remote Monitoring and control. Locally, and also
monitoring, with a rotary knob to set remotely on the VRM Portal.
PowerControl and PowerAssist levels. B M V - 7 1 2 S ma r t B a t t e r y M o n i t o r
Use a smartphone or other Bluetooth
enabled device to:
MK3-USB VE.Bus to USB interface - customize settings,
Connects to a USB port (see ‘A guide to - monitor all important data on
VEConfigure’) single screen,
- view historical data, and to
V E . B u s S ma r t D o n g l e - update the software when new
Measures battery voltage features become available.
and temperature and allows
monitoring and control of V E . B u s t o N M E A 2 0 0 0 in t e r f a c e
Multis and Quattros with a Connects the device to a NMEA2000 marine
smartphone or other electronics network. See the NMEA2000 & MFD
integration guide
Bluetooth enabled device.
41
Cerbo GX and GX Touch 50
www.victronenergy.com
Cerbo GX & GX Touch 50
Accessories included
with the GX Touch 50
42
Energy. Anytime. Anywhere.
www.victronenergy.com
Cerbo GX
Supply voltage 8 – 70V DC
Mounting Wall or DIN rail (35mm)(2)
Communication ports
VE.Direct ports (always isolated) 3 (3)
VE.Bus (always isolated) 2 paralleled RJ45 sockets
VE.Can yes - non isolated
Other
Outer dimensions (h x w x d) 78 x 154 x 48 mm
Operating temperature range -20 to +50°C
Standards
Safety tbd
EMC tbd
Automotive tbd
GX Touch 50
Mounting With included mounting accessories
Display Resolution 800x480
Other
Outer dimensions (h x w x d) 87 x 128 x 12.4 mm
Cable length 2 meter
Notes
1. For more detailed information about the Cerbo GX and the GX Touch 50, please visit the Victron
GX product range page at Victron live:
www.victronenergy.com/live/venus-os:start
2. DIN rail mounting requires additional accessory - DIN35 Adapter.
3. The listed maximum on the `Performance` section in above table is the total connected VE.Direct
devices such as MPPT Solar Charge controllers. Total means all directly connected devices plus
the devices connected over USB. The limit is mostly bound by CPU processing power. Note that
there is also a limit to the other type of devices of which often multiple are connected: PV
Inverters. Up to three or four three phase inverters can typically be monitored on a CCGX. Higher
power CPU devices can monitor more.
Optional accessories
43
Color Control GX www.victronenergy.com
Color Control GX
C o l o r C o nt r o l G X
The Color Control (CCGX) provides intuitive control and monitoring for all Victron power systems.
The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar
chargers, BMV battery monitors, Lynx Ion + Shunt and more.
V R M O n l in e P o r t a l
Besides monitoring and controlling products locally on the CCGX itself, all readings are also
forwarded to our free remote monitoring website: the VRM Online Portal. To get an impression, try
the demo on https://vrm.victronenergy.com. See also the screenshots below.
R e m o t e C o n s o l e on V R M
Monitor, control and configure the CCGX remotely, over the internet. Just like standing in front of the
device, everything can also be done remotely. The same functionality is also available on the local
network, Remote Console on LAN.
A u t o m a t i c g e n s e t s t a rt / s t o p
A highly customizable start/stop system. Use state of charge, voltage, load and other parameters.
Define a special set of rules for quiet times, and optionally a monthly test run.
T h e h e a r t o f E S S – En e r g y S t o r a g e S y s t e m
The CCGX is the Energy Manager in an ESS system. More information in the ESS manual:
https://www.victronenergy.com/live/ess:design-installation-manual
D a t a l og g i n g
When connected to the internet, all data is sent to the VRM Portal. When there is no internet
connection available, the CCGX will store the data internally, up to 48 hours. By inserting a micro SD-
card or USB stick, more data can be stored. These files can then be uploaded to the VRM Portal, or
offline converted with the VictronConnect app, for analysis.
When more than two VE.Direct products must be connected, USB can be used.
I n t e rn e t c o n n e c t i o n
The CCGX can be connected to internet with an Ethernet cable and via wifi. To connect via wifi, a wifi
USB accessory is required. The CCGX has no internal cellular modem: there is no slot for a sim-card.
Use an off-the-shelf GPRS or 3G router instead. See the blog post about 3G routers.
O t h e r h ig h l ig h t s
- The CCGX can automatically update itself from the internet, when there is a new software
version available.
- Multiple languages: English, Czech, German, Spanish, French, Italian, Dutch, Russian, Swedish,
Turkish, Chinese, Arabic.
- Use the CCGX as a Modbus-TCP gateway to all connected Victron products. See our Modbus-
TCP FAQ for more information.
- Powered by the Venus OS – embedded linux.
https://github.com/victronenergy/venus/wiki/sales-pitch
44
Energy. Anytime. Anywhere.
Color Control GX www.victronenergy.com
Color Control GX
Power supply voltage range 8 – 70V DC
C urre nt d raw 12V DC 24V DC 48V DC
Display off 140mA 80mA 40mA
Display at minimum intensity 160mA 90mA 45mA
Display at maximum intensity 245mA 125mA 65mA
Potential free contact 3A / 30V DC / 250V AC (Normally open)
Communication ports
VE.Direct 2 separate VE.Direct ports – isolated
VE.Can 2 paralleled RJ45 sockets – isolated
VE.Bus 2 paralleled RJ45 sockets – isolated
USB 2 USB Host ports – not isolated
Ethernet 10/100/1000MB RJ45 socket – isolated except shield
3rd party interfacing
Use Modbus-TCP to monitor and control all products
Modbus-TCP
connected to the Color Control GX
JSON Use the VRM JSON API to retrieve data from the VRM Portal
Other
Outer dimensions (h x w x d) 130 x 120 x 28mm
Operating temperature range -20 to +50°C
Standards
Safety EN 60950-1:2005+A1:2009+A2:2013
EMC EN 61000-6-3, EN 55014-1, EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive E4-10R-053535
O v e r v i e w - M u l t i w i t h P V I n v e rt e r o n o ut p u t M a i n m en u
G e n s e t c on t r o l p a g e T i l e s o v e r v i ew
45
Color Control GX www.victronenergy.com
V R M P o rt a l - D a s h b o a r d
46
Energy. Anytime. Anywhere.
Color Control GX www.victronenergy.com
M u l t i a n d Q u at t r o
I n v e rt e r / C h a r g e r
Singe, parallel, three- M P P T 1 50 / 70 a n d
phase and split-phase. M P P T 1 50 / 85
Sk y lla - i
V E . C a n R J 45
t e r m in a t o r s Al a rm buz z e r
E t h e rn e t
Connect to internet router
D i g i t a l M u lt i
Con t rol Wifi
Connect to internet router
MPPT 75/15 up
t o 2 50 / 1 00 GPS
USB stick
B M V -7 0 0 o r Used for manually updating
B M V - 7 1 2 S ma r t firmware and for data logging.
T o batt e r y
Not used
Mi croSD Ca rd
Used for manually updating firmware and for
data logging. When panelmounted, this slot is
accessible from the front.
47
Venus
Venus GX GX www.victronenergy.com
V e n us G X
The Venus GX provides intuitive control and monitoring for all Victron power systems. The list of
Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers,
BMV battery monitors, Lynx Ion + Shunt and more.
V R M O n l in e P o r t a l
All readings are forwarded to our free remote monitoring website: the VRM Online Portal. To get an
impression, try the demo on https://vrm.victronenergy.com. See also the screenshots below.
R e m o t e C o n s o l e on V R M
The way to access the device for setting up, as well as monitoring, is via Remote Console. Either via
VRM, via the built-in WiFi Access Point, or on the local LAN/WiFi network.
A u t o m a t i c g e n s e t s t a rt / s t o p
A highly customizable start/stop system. Use state of charge, voltage, load and other parameters.
Define a special set of rules for quiet times, and optionally a monthly test run.
T h e h e a r t o f E S S – En e r g y S t o r a g e S y s t e m
V e n us G X The Venus GX is the Energy Manager in an ESS system. More information in the ESS manual:
https://www.victronenergy.com/live/ess:design-installation-manual
D a t a l og g i n g
When connected to the internet, all data is sent to the VRM Portal. When there is no internet
connection available, the Venus GX will store the data internally, up to 48 hours. By inserting a micro
SD-card or USB stick, more data can be stored. These files can then be uploaded to the VRM Portal, or
offline converted with the VictronConnect app, for analysis.
When more than two VE.Direct products must be connected, USB can be used.
I n t e rn e t c o n n e c t i o n
The Venus GX can be connected to internet with an Ethernet cable and via Wi-Fi. The Venus GX has
no internal cellular modem: there is no slot for a sim-card. Use an off-the-shelf GPRS or 3G router
instead. See the blog post about 3G routers.
V e n us G X f r o n t a n g l e
T a n k l e v e l in p u t s
The tank level inputs are resistive: connect them to a resistive tank sender. Such tank senders are not
supplied by Victron. The tank level ports can each be configured to work with either European tank
senders (0 - 180 Ohm), or US (240 - 30 Ohm).
O t h e r h ig h l ig h t s
- The Venus GX can automatically update itself from the internet, when there is a new software
version available.
- Multiple languages: English, Czech, German, Spanish, French, Italian, Dutch, Russian, Swedish,
Turkish, Chinese, Arabic.
- Use the Venus GX as a Modbus-TCP gateway to all connected Victron products. See our
Modbus-TCP FAQ for more information.
- Powered by the Venus OS – embedded linux.
https://github.com/victronenergy/venus/wiki/sales-pitch
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: +31 (0)36 535 97 00 | E-mail: sales@victronenergy.com
w w w .vi ct ron en erg y .com
48
Energy. Anytime. Anywhere.
Venus GX www.victronenergy.com
Venus GX
Power supply voltage range 8 – 70V DC
C urre nt D raw 210 mA @ 12V 110 mA @ 24V 60 mA @ 48V
Communication ports
VE.Direct 2 separate VE.Direct ports – isolated
VE.Can 2 paralleled RJ45 sockets – isolated
CAN 2nd CAN interface – non isolated
VE.Bus 2 paralleled RJ45 sockets – isolated
USB 2 USB Host ports – not isolated
Ethernet 10/100/1000MB RJ45 socket – isolated except shield
WiFi Access Point Use to connect to Remote Console
WiFi Client Connect the Venux GX to an existing WiFi network
IO
Potential free contact NO/COM/NC – 6 A 250 VAC/30 VDC
Tank level inputs 3 x Configurable for European (0 - 180 Ohm) or US (240 - 30 Ohm)
Temperature level inputs 2 x Requires ASS000001000.
3rd party interfacing
Use Modbus-TCP to monitor and control all products connected to the
Modbus-TCP
Venus GX
JSON Use the VRM JSON API to retrieve data from the VRM Portal
Other
Outer dimensions (h x w x d) 45 x 143 x 96
Operating temperature range -20 to +50°C
Standards
Safety EN 60950-1:2005+A1:2009+A2:2013
EMC EN 61000-6-3, EN 55014-1, EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive In progress
49
BMV-712 Smart: Bluetooth inside
www.victronenergy.com
BMV-712 Smart: Bluetooth inside
B l u e t o ot h i n s i de
With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being
implemented in most other Victron Energy products, wireless communication between products will simplify
system installation and enhance performance.
Ea s y t o i ns ta l l
B M V - 7 1 2 S ma r t All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the
monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10 m) and battery cable with fuse (2 m);
no other components needed.
Also included are a separate front bezel for a square or round display appearance, a securing ring for rear
mounting and screws for front mounting.
M i d p o i n t v o l t a g e m on i t o r i n g
One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in
series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual,
section 5.2, for more information.
B M V be z e l s q ua re We recommend our Battery Balancer (BMS012201000) to maximize service life of series-connected lead-acid
batteries.
O t h e r f ea t u r es
- Battery voltage, current, power, ampere-hours consumed and state of charge
- Remaining time at the current rate of discharge
- Programmable visual and audible alarm
- Programmable relay, to turn off non critical loads or to run a generator when needed
- 500 Amp quick connect shunt and connection kit
- Shunt selection capability up to 10,000 Amps
- VE.Direct communication port
- Stores a wide range of historical events,, which can be used to evaluate usage patterns and battery health
- Wide input voltage range: 6.5 – 70V
- High current measurement resolution: 10 mA (0.01A)
- Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and
corresponding alarm and relay settings
S e e t h e V i ct ron C on n e ct B M V a pp Di s cov e ry
S h e e t f or m ore s cre e n s h ot s
50
Energy. Anytime. Anywhere.
V e n u s GX
The Venus GX provides intuitive control and monitoring. It has the same
functionality as the Color Control GX, with a few extras:
- lower cost, mainly because it has no display or buttons
- 3 tank sender inputs
- 2 temperature inputs
51
BlueSolar and SmartSolar MPPT Charge Controllers - Overview
52
Energy. Anytime. Anywhere.
SmartSolar Charge Controllers with load output
SmartSolar charge controller MPPT 75/10, 75/15, 100/15 & 100/20
MPPT 75/10, 75/15, 100/15, 100/20-48V www.victronenergy.com
B l u eto o th S m a r t b u i l t- i n
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
V E .D i rect
For a wired data connection to a Color Control GX, other GX products, PC or other devices
U l tr a - f a s t M a x i m u m P o w e r P o i nt T r a cki n g ( M P P T )
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve
energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
L o a d o u tpu t
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect
the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay).
Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.
The load output is short circuit proof.
B atte ry L i f e: i n tel l i g en t ba t te r y m a n a g e m ent
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the
battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation
(no regular full recharge) will destroy a lead-acid battery within weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load
disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly
the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is
achieved about once every week.
P r o g r a m m a bl e b a t ter y ch a r g e a l g o r i t h m
See the software section on our website for details
D a y/ ni g ht ti m i ng a nd l i g h t d i m m i ng o p t i o n
See the software section on our website for details
I nt er n a l tem p er a tu r e s ens o r
S m a r t S o l a r C h a r g e C on t r o l l e r Compensates absorption and float charge voltage for temperature.
MPPT 75/15 Opti o na l ex ter nal ba tte ry v o l tag e a nd te m pera tu r e s en si ng v i a B l u e to o th
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to
one or more SmartSolar Charge Controllers.
Fu l l y d i s c ha r g ed b a t ter y r e c o v e r y f u nc ti o n
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
SmartSolar Charge Controller MPPT 75/10 MPPT 75/15 MPPT 100/15 MPPT 100/20-48V
Battery voltage (auto select) 12/24V 12/24/48V
B l u e t o ot h s e n s i n g Rated charge current 10A 15A 15A 20A
S m a r t B att e r y S e ns e Nominal PV power, 12V 1a,b) 145W 220W 220W 290W
Nominal PV power, 24V 1a,b) 290W 440W 440W 580W
Nominal PV power, 48V 1a,b) n. a. n. a. n. a. 1160W
Max. PV short circuit current 2) 13A 15A 15A 20A
Automatic load disconnect Yes
Max. PV open circuit voltage 75V 100V
Peak efficiency 98%
Self-consumption – load on 12V: 19 mA 24V: 16 mA 26 / 20 / 19 mA
Self-consumption – load off 12V: 10 mA 24V: 8 mA 10 / 8 / 7 mA
Charge voltage 'absorption' 14,4V / 28,8V (adjustable) 14,4V / 28,8V / 57,6V (adj.)
B l u e t o ot h s e n s i n g Charge voltage 'float' 13,8V / 27,6V (adjustable) 13,8V / 27,6V / 55,2V (adj.)
B M V - 7 1 2 S ma r t B a t t e r y M o n i t o r Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / °C resp. -32 mV / °C
Max. continuous load current 15A 20A / 20A / 1A
Low voltage load disconnect 11,1V / 22,2V / 44,4V or 11,8V / 23,6V / 47,2V or Battery Life algorithm
Low voltage load reconnect 13,1V / 26,2V / 52,4V or 14V / 28V / 56V or Battery Life algorithm
Protection Output short circuit / Over temperature
Operating temperature -30 to +60°C (full rated output up to 40°C)
Humidity 95%, non-condensing
Data communication port VE.Direct (see the data communication white paper on our website)
ENCLOSURE
Colour Blue (RAL 5012)
Power terminals 6 mm² / AWG10
Protection category IP43 (electronic components), IP22 (connection area)
Weight 0,5 kg 0,6 kg 0,65 kg
Dimensions (h x w x d) 100 x 113 x 40 mm 100 x 113 x 50 mm 100 x 113 x 60 mm
STANDARDS
Safety EN/IEC 62109-1, UL 1741, CSA C22.2
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V
2) A PV array with a higher short circuit current may damage the controller.
53
SmartSolar Charge Controllers MPPT 100/30 & 100/50
SmartSolar charge controller MPPT 100/30 & 100/50 www.victronenergy.com
54
Energy. Anytime. Anywhere.
SmartSolar Charge Controller MPPT 150/35 & 150/45
SmartSolar charge controller MPPT 150/35 & 150/45
B l u eto o th S m a r t b u i l t- i n
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
V E .D i rect
For a wired data connection to a Color Control GX, other GX products, PC or other devices
U l traf a s t M a x i m u m P o w e r P o i nt T r a cki n g ( M P P T )
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve
energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
A d v a nc ed M a x i m u m P o w er P o i nt D et ec ti o n i n ca s e o f pa r ti a l s ha d i ng c o nd i ti o n s
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve.
Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.
The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
O u ts ta nd i ng co n v er s i o n ef f i ci en cy
No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).
Fl ex i b l e c ha r g e a l g o r i thm
Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms,
selectable with a rotary switch (see manual for details).
E x ten si v e el e ctr o ni c pr o te cti o n
- Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
I nt er n a l tem p er a tu r e s ens o r
Compensates absorption and float charge voltage for temperature.
Opti o nal ex ter nal ba tte ry v o l tag e a nd te m pera tur e s en si ng v i a B l ue to o th
S m a r t S o l a r C h a r g e C on t r o l l e r A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to
M P P T 1 50 / 35 one or more SmartSolar Charge Controllers.
Fu l l y d i s c ha r g ed b a t ter y r e c o v e r y f u nc ti o n
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
55
www.victronenergy.com
SmartSolar Charge Controllers with screw- or MC4 PV connection
SmartSolar charge controller MPPT 150/45 - MPPT 150/100
MPPT 150/45 up to MPPT 150/100
B l u e t o o t h S ma r t b u i l t - i n
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
U l t r a - f a s t M a x i m u m P o w e r P o i n t T ra c k i n g ( M P P T )
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast
MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers
and by up to 10% compared to slower MPPT controllers.
O u t s t a n d i n g c o n v e rs i o n e f f i c i e n c y
S m a r t S o l a r C h a r g e C on t r o l l e r No cooling fan. Maximum efficiency exceeds 98%.
M P P T 1 5 0 / 1 0 0 -T r
w i t h o p t i on a l p l u g g a b l e d i s p la y F l e x i b l e c h a r g e a lg o r i t h m
Fully programmable charge algorithm (see the software page on our website), and eight pre-
programmed algorithms, selectable with a rotary switch (see manual for details).
I n t e rn a l t e m p e r a t u r e s e n s o r
Compensates absorption and float charge voltage
for temperature.
B l u e t o ot h s e n s i n g :
B M V - 7 1 2 S ma r t B a t t e r y M o n i t o r
S m a r t S o l a r p l u g g a b l e d i s p la y
56
www.victronenergy.com Energy. Anytime. Anywhere.
SmartSolar Charge Controllers with screw- or MC4 PV connection
MPPT 250/60 up to MPPT 250/100 SmartSolar charge controller MPPT 250/60 - 250/100
B l u e t o ot h S ma r t b u i l t - i n
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
U l t r a - f a s t M a x i m u m P o w e r P o i n t T ra c k i n g ( M P P T )
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast
MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers
and by up to 10% compared to slower MPPT controllers.
I n t e rn a l t e m p e r a t u r e s e n s o r
Compensates absorption and float charge voltage for temperature.
V E.D i re ct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
B l u e t o ot h s e n s i n g : Re m o t e o n- o f f
S m a r t B att e r y S e ns e To connect for example to a VE.BUS BMS.
P r o g r a m ma b l e r e l a y
Can be programmed (a.o. with a smartphone)
to trip on an alarm, or other events.
O p t i o n a l : S m a rt S o l a r p l u g g a b l e L C D d i s p l a y
Simply remove the rubber seal that protects
the plug on the front of the controller,
and plug-in the display.
B l u e t o ot h s e n s i n g :
B M V - 7 1 2 S ma r t B a t t e r y M o n i t o r
S m a r t S o l a r p l u g g a b l e d i s p la y
57
About Victron Energy
With over 46 years of experience, Victron Energy enjoys an unrivalled reputation for technical innovation, reliability and quality.
Victron is a world leader in the supply of self-supporting electrical power. Our products have been designed to meet the most
demanding situations faced by a diversity of craft, recreational and commercial alike. Victron’s ability to meet the demand for
customized off-grid systems is unprecedented. Our product range includes sine wave inverters and inverter/chargers, battery
chargers, DC/DC converters, transfer switches, gel and AGM batteries, battery monitors, solar charge controllers,
solar panels, complete network solutions and many other innovative solutions.
Having served the off-grid, industrial and vehicle markets as well as both the commercial and leisure marine sectors for over 46
years, Victron has an established network of dealers and distributors covering the whole world. Our customer base is such that
providing prompt and competent local service is essential.
This is reflected in the capabilities of our support network. Our flexible approach to service support and our commitment to
quick turnaround for repairs is marketleading. There are countless examples of Victron products that have provided for
decades of reliable service in the most demanding applications. This level of reliability combined with the highest level of
technical know-how results in Victron Energy power systems that offer the very best value available.
5858
Energy. Anytime. Anywhere.
5959
SAL0 SAL064140020
REV 05
2021-02