Professional Documents
Culture Documents
((E))B
146. According to uniform wear theory____. Where, w=Angular velocity of shaft, r=radius of
shaft, W=Axial lead on shaft
((A))Pw=constant ((B))Pr=constant ((C)) PT=constant ((D)) PW=constant
((E))B
147. In case of foot step bearing, the frictional force under the conditions of uniform were may
be assumed to be acting at ________.
((A))r ((B))r/2 ((C))3r/2 ((D)) 2r/3
((E))B
148.The ratio of friction torque for uniform pressure to uniform were for the same dimensions
and load is _____________.
((A))>1 ((B))=1 ((C))<1 ((D))=1/2
((E))A
149. According to uniform wear theory____. Where,w=Angular velocity of shaft, r=radius of
shaft, W=Axial lead on shaft
((A))Pw=constant ((B))Pr=constant((C)) PT=constant ((D)) PW=constant
((E))B
150.Torque required to overcome the friction between shaft and bearing surface in case of
multiple flat collar bearing is ___________.
((A)) Independent of no's of collars ((B)) Dependent of radius of collars
((C)) Dependent of no's of collars ((D)) None of the above
((E))A
151. According to uniform were theory frictional torque transmitted by conical pivot bearing is
________.
((A)) 2/3 (μ W R cosec α) ((B)) 1/2 (μ W R cosec α)
((C)) 1/2 (μ W R cos α) ((D)) μ W R cosec α
((E))B
152. Frictional torque as per uniform were theory is __________.
((A)) μP (Ro+/Ri) ((B)) ½ μP (Ro+/Ri)
((C)) ½ μP [(Ro³+/Ri³)/(Ro²+/Ri²)] ((D)) μP(Ro³-/Ri³)/2 (Ro²-/Ri²)
((E))C