Professional Documents
Culture Documents
Ersatzteilliste
Hydraulikhammer
EHB 25
Hagen
INSTRUCTIONS FOR USE
This parts manual describes the configuration of the part components of the product and is intended only to assist to
order spare parts for maintenance work
This manual contains no safety information for operating the product or maintenance work. Please observe the
safety instructions described in the relevant operation manual.
The illustrations shown in this manual is not appropriate for workshop instructions, so they should not be used for
assembling or disassembling the product. Please refer to the workshop manual for that purpose.
For product warranty, please refer to the warranty conditions provided separately.
The illustrations in this manual show only the overall shapes and positions of the part components so they may not
be identical with the actual parts.
For the purpose of continued product improvement, some information in this manual could be changed without prior
notice, and might be differ from your product which was not covered by this publication.
If you found the information that is unclear or not corresponding with the actual product, contact Everdigm or
Everdigm distributor.
-2-
3. Item: Key number which shows the referring number of the part in corresponding illustration.
For a revised part which replaces the old one with same item number, the item is not shown.
Item numbers are not always in sequence.
+..... Represent the title assembly containing the entire part in the illustration.
* with the same item number..... Represent selectable parts depending on product version.
6. Qty: Quantity used for one unit of their parent assembly containing the parts.
When the quantity of the title assembly is blank, refer to the page shown with ‘►’, but when it is
not blank, it represents the quantity used for one unit of the product.
For the parts with the prefix ‘-‘ or ‘--‘ in front of their part name, the quantity is expressed with that
prefix.
AR… As many as required (variable quantity depending on the product)
7. S/N: Serial number of the product which those parts are applied
Parts without serial no. indications are used in every product regardless of serial number.
8. Remarks: Supplementary comment. Refer to the following for the code within [ ].
A….. The parts with this code can be used interchangeably with each other.
R….. The part with this code is no longer manufactured as a result of a revision and replaced by
the new part whose part number follows this code.
K….. The part with this code is contained in the service kit whose item number follows this code.
D….. The part with this code cannot be supplied separately. The assembly part containing this
part should be ordered.
S….. Non-standard part which can be supplied by separate order
When ordering parts, please specify detail part names as shown in the following example,
Model name of product: EX-20
Serial number: 135
Part No.: A123-4567
Part name: Pin
Quantity: 2
Purchaser’s name & address: ....
-3-
EHB25-Rev7/130114
TABLE OF CONTENTS
-4-
EHB25-Rev7/130114
EHB25-BA
-5-
EHB25-Rev7/130114
902
805
901
804
400 803
300 801
200
800
603
600
604 100
605
601
602
701
700
702
802
500
-6-
EHB25-Rev7/130114
-7-
EHB25-Rev7/130114
122
106
112 111
110 116
109 112 124
115 122
108 106
114 112
121
107 105
113 101
125
112
114 106
116
108
113
107
117
118
113 119
112
106 107 120
112
106
116
123 113
111
107
112
110
102 102-1
102-2
103
104
-8-
EHB25-Rev7/130114
-9-
EHB25-Rev7/130114
206
207
203
205
201
204
202
- 10 -
EHB25-Rev7/130114
304
302
304
301 302
303
303
304
303
303
- 11 -
EHB25-Rev7/130114
401
- 12 -
EHB25-Rev7/130114
509
508
511 511
507 512
508 510
511
513
502
503
504
505
501
506
- 13 -
EHB25-Rev7/130114
701 709
711 708
712
704
707
706
710
703
705 702
- 14 -
EHB25-Rev7/130114
3
5
4 9
2
8
1
8
- 15 -
EHB25-Rev7/130114
7
4
3
2
6
1
- 16 -
EHB25-Rev7/130114
6 4
5 2
3
4
- 17 -
EHB25-Rev7/130114
- 18 -
EHB25-Rev7/130114
TOOL SHAPE
TYPE OF TOOL Moil Point Flat End Flat Wedge Flat Wedge Moil Wedge
(Conical) (Blunt) -Horizontal - Vertical (Pyramid)
(Cross-cut) (Inline-cut)
- 19 -
EHB25-Rev7/130114
21
1 22 27
7 23
17 8
11
24
9
13 25
A POWER CELL
26 ASS'Y
23 14
15 12
20
19 6
10
18
16 4
- 20 -
EHB25-Rev7/130114
- 21 -
EHB25-Rev7/130114
404
401 202
405 403
203
402
405
- 22 -
EHB25-Rev7/130114
4
5
1 6
3
9 9
2 8 7
4 3
7
3
- 23 -
EHB25-Rev7/130114
3, 4, 5, 6
1, 2 7, 8, 9 10 11, 12, 13, 14
33, 34 35 36 37
- 24 -
EHB25-Rev7/130114
- 25 -
Notes
Notes