Professional Documents
Culture Documents
IRIS Valve Actuator Working Manual
IRIS Valve Actuator Working Manual
The Actuator for IRIS control valve for coarse and fine feed consists of the following:
Objective: To achieve Full opening, Partial closing and full closing for Coarse feed and fine feed
arrangement.
Important Points:
Operation Sequence:
Position 1: Valve is completely closed (No electric supply to Solenoid valve or Limit switch)
To open the IRIS valve, supply to be given to 5/2 way solenoid valve so that the IRIS valve completely
opens. At this time, there should be no signal to limit switch. Now the IRIS valve has opened 100%
enabling coarse feed.
To start the fine feed, cut off the supply from 5/2 way - so that the IRIS valve starts closing.
Simultaneously supply signal to limit switch...hence when the position (say 80% close) is reached, it
will energize the 2/2 way solenoid valve and the system will stay put at this position– resulting in
fine feed.
Now to close the IRIS valve completely, cut off the supply from limit switch.
NOTES:
1. The proportion of coarse/fine feed can be adjusted by shifting the position of Reed switch. In
any case it should be more than 10-15%
2. Flow control valve is factory adjusted and should not be tampered with – as it may result in
malfunction of the actuator.