This document provides specifications and instructions for performing brake and steering pressure checks and performance checks on a CAT 777F water truck. It lists the specification and actual pressure readings for the brake pump, front and rear service brakes, and brake accumulators. It also outlines specifications for checking service brakes, a service brake wear indicator, and parking brakes by verifying the machine does not move below a certain rpm. Finally, it lists the specifications for steering cycle time and pressure.
This document provides specifications and instructions for performing brake and steering pressure checks and performance checks on a CAT 777F water truck. It lists the specification and actual pressure readings for the brake pump, front and rear service brakes, and brake accumulators. It also outlines specifications for checking service brakes, a service brake wear indicator, and parking brakes by verifying the machine does not move below a certain rpm. Finally, it lists the specifications for steering cycle time and pressure.
This document provides specifications and instructions for performing brake and steering pressure checks and performance checks on a CAT 777F water truck. It lists the specification and actual pressure readings for the brake pump, front and rear service brakes, and brake accumulators. It also outlines specifications for checking service brakes, a service brake wear indicator, and parking brakes by verifying the machine does not move below a certain rpm. Finally, it lists the specifications for steering cycle time and pressure.
Date Done By Brake System Pressures Description Specification Actual Comment Brake Pump Pressure 13620 ± 350 kPa (1975 ± 50 psi) Front Service brake pressure 6946.5 ± 741.0 kPa (1007.5 ± 107.5 psi Rear Service brake pressure 6067 ± 345 kPa (880 ± 50 psi)
Brake Accumulators Pre-charge 5500 kPa (800 psi) at 21°C
5605 kPa (815 psi) at 27°C 5735 kPa (830 psi) at 32°C
Brake System Performance Checks
Description Specification Actual Comment Service Brakes In First gear, the machine should not move below 1200 rpm Service brakes wear indicator Check thickness of brake discs through inspection ports. If the pin is visible then the brakes should be replaced Parking Brakes In D position, the machine should not move below 1200 rpm Steering System Pressure Checks Description Specification Actual Comment Steering Cycle time 5 to 6 seconds Steering Pressure 20850 kPa (3025 psi) to 22043 kPa (3197 psi). CAT 777F Brake and Steering Performance Checks