Professional Documents
Culture Documents
Semiconductor Technical Data: Ultrafast Rectifiers 30 Amperes 200-400-600 VOLTS
Semiconductor Technical Data: Ultrafast Rectifiers 30 Amperes 200-400-600 VOLTS
. . . designed for use in switching power supplies, inverters and as free
wheeling diodes, these state–of–the–art devices have the following features:
• Ultrafast 35 and 60 Nanosecond Recovery Time *Motorola Preferred Devices
• 175°C Operating Junction Temperature
• High Voltage Capability to 600 Volts
• Low Forward Drop ULTRAFAST RECTIFIERS
• Low Leakage Specified @ 150°C Case Temperature 30 AMPERES
• Current Derating Specified @ Both Case and Ambient Temperatures 200–400–600 VOLTS
• Epoxy Meets UL94, VO @ 1/8″
• High Temperature Glass Passivated Junction
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 4.3 grams (approximately)
• Finish: All External Surfaces Corrosion Resistant and
Terminal Leads are Readily Solderable 1
• Lead Temperature for Soldering Purposes: 260°C Max. 2, 4
for 10 Seconds 1
• Shipped 30 units per plastic tube 3 2
• Marking: U3020, U3040, U3060 3
CASE 340D–02, Style 2
TO–218AC
Rev 4
IR , REVERSE CURRENT ( µ A)
25°C
50 10
5
30 2
1
20 0.5 25°C
0.2
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
0.1
10 0.05
0.02
0.01
0 20 40 60 80 100 120 140 160 180 200
5
VR, REVERSE VOLTAGE (VOLTS)
14
1
dc
12
10
0.5 SQUARE WAVE
8
0.3 6
0.2 4
RATED VOLTAGE APPLIED
2
0.1 0
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 140 150 160 170 180
vF, INSTANTANEOUS VOLTAGE (VOLTS) TC, CASE TEMPERATURE (°C)
Figure 1. Typical Forward Voltage (Per Leg) Figure 3. Current Derating, Case (Per Leg)
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
14
P F(AV) , AVERAGE POWER DISSIPATION (WATTS)
16
(RESISTIVE LOAD) PK = π
dc I
12 14 IAV
RθJA = 15°C/W AS OBTAINED
12 I
10 USING A SMALL FINNED (CAPACITIVE LOAD) PK = 5
IAV dc
HEAT SINK.
SQUARE WAVE 10
8 10
8
dc 20
6
6
4 SQUARE WAVE
SQUARE WAVE 4
TJ = 125°C
2 RθJA = 40°C/W
AS OBTAINED IN FREE AIR 2
WITH NO HEAT SINK.
0 0
0 20 40 60 80 100 120 140 160 180 200 0 2 4 6 8 10 12 14 16
TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 4. Current Derating, Ambient (Per Leg) Figure 5. Power Dissipation (Per Leg)
IR , REVERSE CURRENT ( µ A)
50 100°C
10
100°C 25°C
TJ = 150°C 25°C 5
30
2
1
20
0.5
0.2
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
10 0.1
0.05
0.02
5 0.01
0 50 100 150 200 250 300 350 400 450 500
VR, REVERSE VOLTAGE (VOLTS)
3
Figure 7. Typical Reverse Current (Per Leg)
2
14
1 dc
12
10
SQUARE WAVE
0.5
8
0.3 6
0.2 4
RATED VOLTAGE APPLIED
2
0.1 0
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 140 150 160 170 180
vF, INSTANTANEOUS VOLTAGE (VOLTS) TC, CASE TEMPERATURE (°C)
Figure 6. Typical Forward Voltage (Per Leg) Figure 8. Current Derating, Case (Per Leg)
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
14
P F(AV) , AVERAGE POWER DISSIPATION (WATTS)
16
(RESISTIVE–INDUCTIVE LOAD) PK = π
I
dc
14 IAV
12 I
RθJA = 15°C/W AS OBTAINED (CAPACITIVE LOAD) PK = 5 dc
12 IAV
10 USING A SMALL FINNED
10
HEAT SINK.
SQUARE WAVE 10
8
20 SQUARE WAVE
8
6 dc
6
4
SQUARE WAVE 4
TJ = 125°C
2 RθJA = 40°C/W
AS OBTAINED IN FREE AIR 2
WITH NO HEAT SINK.
0 0
0 20 40 60 80 100 120 140 160 180 200 0 2 4 6 8 10 12 14 16
TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 9. Current Derating, Ambient (Per Leg) Figure 10. Power Dissipation (Per Leg)
100 200
100
50 TJ = 150°C
IR , REVERSE CURRENT ( µ A)
50 20
10
TJ = 150°C 100°C
5
30
2
100°C
20 1
0.5 25°C
25°C
i F , INSTANTANEOUS FORWARD CURRENT (AMPS)
0.2
10 0.1
0.05
0.02
150 200 250 300 350 400 450 500 550 600 650
5
VR, REVERSE VOLTAGE (VOLTS)
2
16
0.2 4
RATED VOLTAGE APPLIED
2
0.1 0
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 140 150 160 170 180
vF, INSTANTANEOUS VOLTAGE (VOLTS) TC, CASE TEMPERATURE (°C)
Figure 11. Typical Forward Voltage (Per Leg) Figure 13. Current Derating, Case (Per Leg)
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
10
P F(AV) , AVERAGE POWER DISSIPATION (WATTS)
16
dc I dc
RθJA = 16°C/W AS OBTAINED (CAPACITIVE LOAD) PK = 5
9 IAV
FROM A SMALL TO–220 14
8 HEAT SINK. 10
12
7 SQUARE WAVE
6 10
20 SQUARE WAVE
5 8
4 dc (RESISTIVE–INDUCTIVE LOAD)
6
3 IPK = π
SQUARE WAVE 4 IAV
2 TJ = 125°C
RθJA = 60°C/W
1 AS OBTAINED IN FREE AIR 2
0 WITH NO HEAT SINK. 0
0 20 40 60 80 100 120 140 160 180 200 0 2 4 6 8 10 12 14 16
TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 14. Current Derating, Ambient (Per Leg) Figure 15. Power Dissipation (Per Leg)
0.2 0.1
ZθJC(t) = r(t) RθJC
0.1 0.05 P(pk) RθJC = 1.5°C/W MAX
0.01 D CURVES APPLY FOR POWER
0.05 t1
PULSE TRAIN SHOWN
t2 READ TIME AT T1
SINGLE PULSE TJ(pk) – TC = P(pk) ZθJC(t)
DUTY CYCLE, D = t1/t2
0.02
0.01
0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1K
t, TIME (ms)
1K
500 TJ = 25°C
C, CAPACITANCE (pF)
200
100
50
20
10
1 2 5 10 20 50 100
VR, REVERSE VOLTAGE (VOLTS)
OUTLINE DIMENSIONS
C
B Q E NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
U 4 MILLIMETERS INCHES
DIM MIN MAX MIN MAX
A A ––– 20.35 ––– 0.801
S L
B 14.70 15.20 0.579 0.598
C 4.70 4.90 0.185 0.193
K 1 2 3 D 1.10 1.30 0.043 0.051
E 1.17 1.37 0.046 0.054
G 5.40 5.55 0.213 0.219
H 2.00 3.00 0.079 0.118
J 0.50 0.78 0.020 0.031
K 31.00 REF 1.220 REF
L ––– 16.20 ––– 0.638
Q 4.00 4.10 0.158 0.161
S 17.80 18.20 0.701 0.717
D J U 4.00 REF 0.157 REF
H V 1.75 REF 0.069
V
G STYLE 2:
PIN 1. ANODE 1
2. CATHODE(S)
3. ANODE 2
4. CATHODE(S)
CASE 340D–02
ISSUE B
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
Mfax: RMFAX0@email.sps.mot.com – TOUCHTONE 1–602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
– http://sps.motorola.com/mfax/
HOME PAGE: http://motorola.com/sps/
6 ◊ Rectifier MUR3020PT/D
Device Data