You are on page 1of 10

Line Sizing Hydraulics

ChE 410 Chemical Engineering Design 1


Prepared by:
Engr. Mark Lester C. Real, AMIChemE, CPE II, CTA
Faculty Member, ChE Department
College of Technology, University of San Agustin
Ludwig
McCabe
Geankoplis
Geankoplis
Geankoplis
Coulson
Coulson
Notes: Unless othenvise specified, DN 1 ", 2", 3", 5", 7", 9"
and 22" should not be used. Final selection will be
based on economical aspects.

You might also like