Professional Documents
Culture Documents
Thank you for your interest in our products. Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/CMBASIS/96806984/CM10-3-A-R-G-V-AQQV.html
info@lenntech.com
tel. +31 152 610 900
fax. +31 152 616 289
Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial
discharge port. Pump materials in contact with the liquid are in high-grade stainless steel. The
mechanical shaft seal is a special designed, unbalanced O-ring seal. Pipework connection is via
internal Whitworth pipe threads, Rp (ISO 7/1).
Pump
A combination of a stop ring and a Nord-lock® washer secures a tight and reliable fixation of the
impeller spacing pipes to the splined pump shaft. It is possible to remove and fit the hydraulic parts from
the pump side. The inlet and outlet port are integrated in the pump sleeve. The inlet part, chambers and
discharge part are hold together by four staybolts and a retaining flange.
The pump is fitted with an unbalanced O-ring seal with a rigid torque-transmission system. It has a fixed
seal driver ensuring a reliable rotation of all parts. The dynamic secondary seal is an O-ring.
Primary seal:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this
material pairing offers good resistance against abrasive particles.
Secondary seal material: FKM (fluorocarbon rubber)
FKM has excellent resistance to oils and chemicals. Above 90 °C, FKM should only be used in media
without water.
The pump shaft is connected to the motor shaft through a left thread and tight fit. The shaft cannot be
dismantled.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to EN 50347. Electrical
tolerances comply with EN 60034.
The motor can be connected to a variable speed drive for adjustment of pump performance to any duty
point. Grundfos CUE offers a range of variable speed drives. Please find more information in Grundfos
Product Center.
Technical data
Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 90 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³
Technical:
Rated flow: 10 m³/h
Rated head: 38 m
Primary shaft seal: AQQV
Approvals on nameplate: CE,WRAS,ACS,TR,EAC
Curve tolerance: ISO9906:2012 3B
Materials:
Pump housing: Stainless steel
DIN W.-Nr. 1.4401
AISI 316
Impeller: Stainless steel
DIN W.-Nr. 1.4401
AISI 316
Rubber: FKM
Installation:
Maximum ambient temperature: 55 °C
Maximum operating pressure: 16 bar
Max pressure at stated temp: 16 bar / 90 °C
Flange standard: WHITWORTH THREAD RP
Pump inlet: Rp 1 1/2
Pump outlet: Rp 1 1/2
Electrical data:
Motor type: 90SC
IE Efficiency class: IE2
Rated power - P2: 2.2 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 220-240D/380-415Y V
Service factor: 1
Rated current: 8,15-7,85/4,7-4,5 A
Starting current: 890-1020 %
Rated speed: 2880-2910 rpm
Motor efficiency at full load: 83.2 %
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Others:
Minimum efficiency index, MEI ≥: 0.52
Net weight: 30.3 kg
Gross weight: 32.8 kg
50 100
45 90
40 80
35 70
30 60
25 50
20 40
15 30
10 20
5 10
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Q [m³/h]
P NPSH
[kW] [m]
2.5 25
P1
2.0 20
P2
1.5 15
1.0 10
0.5 5
0.0 0
Rated head: 38 m
35 70
Impellers: 3
Primary shaft seal: AQQV 30 60
Approvals on nameplate: CE,WRAS,ACS,TR,EAC
Curve tolerance: ISO9906:2012 3B 25 50
Pump version: A
20 40
Model: A
Materials: 15 30
Pump housing: Stainless steel
DIN W.-Nr. 1.4401 10 20
AISI 316
5 10
Impeller: Stainless steel
DIN W.-Nr. 1.4401 0 0
0 2 4 6 8 10 12 Q [m³/h]
AISI 316
P NPSH
Material code: G [kW] [m]
Rubber: FKM 2.5 25
P1
Code for rubber: V
2.0 20
Installation:
P2
Maximum ambient temperature: 55 °C
1.5 15
Maximum operating pressure: 16 bar
Max pressure at stated temp: 16 bar / 90 °C Rp 3/8
Rp 1
12
3/8
1/2
199
490.7
204
170
160
219
140
100
218.6
209.5
178
271.7
105
385.7
1.0 10
Flange standard: WHITWORTH THREAD RP
Pump inlet: Rp 1 1/2 0.5 5
Electrical data:
209.5
Motor type: 90SC 218.6
12 100
IE Efficiency class: IE2
Rated power - P2: 2.2 kW 160 140 219 Rp 3/8
199 170 204
Mains frequency: 50 Hz
490.7
Rated voltage: 3 x 220-240D/380-415Y V
Service factor: 1
Rated current: 8,15-7,85/4,7-4,5 A
Starting current: 890-1020 %
Rated speed: 2880-2910 rpm
Motor efficiency at full load: 83.2 %
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: NO
Others:
Minimum efficiency index, MEI ≥: 0.52 +T +T +T
TO AMPLIFIER
RELAY
L1 L2 L3
THERMISTORS PTC ACCORDING TO DIN 44082
+T +T +T
TO AMPLIFIER
RELAY
L1 L2 L3
eta
0.6 3.0
0.4 2.0
0.2 1.0
0.0 0.0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 P2 [kW]
n P1
[rpm] [kW]
3000
P1
n
2800 2.0
2600 1.0
2400 0.0
Rp 1 1/2
Rp 1 1/2
Rp 3/8
105
204
219
490.7
385.7
170
140
271.7
209.5
218.6
100
178
160
199
Rp 3/8
12
251a
251d
77
28
7
7a 17
301a 219
92 301a
11
92
9
51
11b
105
215a
100
215
49
18
66a
45
67
530a
530
215a 217
6
531a
531
534
534a
3 2 1
TM058200
Printed from Grundfos Product Centre [2018.06.003] 8/10
Exploded view ( TM057026 for MGE model H/I )
251d
251b
291
290
287
277a
287a 273b
293 502
277
252a 286
273a
273
266
275a
268
268a
289a
289
251a 288b
288
288a
252b
159e
150
152
151
157 156
156c
158
185
154
178
172
187
153 191
188
156d
156b
192
156c
159d