Professional Documents
Culture Documents
Thank you for your interest in our products. Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/CRFAM/96500964/CR-10-2-A-FJ-A-E-HQQE.html
info@lenntech.com
tel. +31 152 610 900
fax. +31 152 616 289
Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump
head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal
ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid
split coupling. Pipe connection is via combined DIN-JIS flanges.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor
stool by means of two coupling guards.
The pump head, pump head cover and flange for motor mounting is made in one piece. The pump
head has a combined 1/2" priming plug and vent screw.
The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system. This seal
type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,
this seal type is suitable for high-pressure applications. The cartridge construction also protects the
pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this
material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surfaces, and
the shape of the blades ensure a high efficiency.
The base is made of cast iron. The flanges and base are cast in one piece. The outlet side of the base
has a drain plug. The pump is secured to the foundation by four bolts through the base plate.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.
The motor is flange-mounted with tapped-hole flange (FT).
Motor-mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.
The motor does not incorporate motor protection and must be connected to a motor-protective circuit
breaker which can be manually reset. The motor-protective circuit breaker must be set according to the
rated current of the motor (I1/1).
Technical data
Controls:
Frequency converter: NONE
Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³
Technical:
Rated flow: 10 m³/h
Rated head: 15.3 m
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals on nameplate: CE, EAC,ACS
Curve tolerance: ISO9906:2012 3B
Materials:
Base: Cast iron
EN 1561 EN-GJL-200
ASTM A48-25B
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: SIC
Installation:
Maximum ambient temperature: 60 °C
Maximum operating pressure: 16 bar
Electrical data:
Motor standard: IEC
Motor type: 80A
IE Efficiency class: IE3
Rated power - P2: 0.75 kW
Power (P2) required by pump: 0.75 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 220-240D/380-415Y V
Rated current: 3.30/1.90 A
Starting current: 580-620 %
Cos phi - power factor: 0.81-0.71
Rated speed: 2840-2870 rpm
Efficiency: IE3 80,7%
Motor efficiency at full load: 80.7 %
Motor efficiency at 3/4 load: 82.7 %
Motor efficiency at 1/2 load: 81.7 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 36 kg
Gross weight: 40 kg
Shipping volume: 0.08 m³
22
20 100
18 90
16 80
14 70
12 60
10 50
8 40
6 30
4 20
2 10
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
P NPSH
[W] [m]
800 P1 8
P2
600 6
400 4
200 2
0 0
Stages: 2 14 70
Impellers: 2
12 60
Number of reduced-diameter impellers: 0
10 50
Low NPSH: N
Pump orientation: Vertical 8 40
Shaft seal arrangement: Single
6 30
Code for shaft seal: HQQE
Approvals on nameplate: CE, EAC,ACS 4 20
Curve tolerance: ISO9906:2012 3B
Pump version: A 2 10
Model: A 0 0
Materials: 0 2 4 6 8 10 Q [m³/h]
P NPSH
Base: Cast iron [W] [m]
EN 1561 EN-GJL-200 P1
800 8
ASTM A48-25B
Impeller: Stainless steel
600 P2 6
EN 1.4301
AISI 304
400 4
Material code: A
Code for rubber: E
Bearing: SIC 200 2
Installation:
Maximum ambient temperature: 60 °C 0 0
39
130
1
4
x
1
x
3.5
1 X G 1/2
28
4 0.2
G 1/2 120
109
141
256
215
280
178
141
16 bar / -20 °C
Type of connection: DIN / JIS
Size of inlet connection: DN 40
231
1 1/2 inch
Size of outlet connection: DN 40
120
Pressure rating for pipe connection: PN 25 G 1/2 G 1/2
1 X G 1/2
Connect code: FJ
Liquid:
114
150
20
Mains frequency: 50 Hz
L1 L2
Number of poles: 2
cos phi
0.6 3.0
0.4 2.0
0.2 1.0
0.0 0.0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 P2 [kW]
n P1
[rpm] [kW]
2800 n 1.6
P1
2600 1.2
2400 0.8
2200 0.4
2000 0.0
13.5
x
150
4
114
114
215
256
39
20.2
x
20
18
x
4
G 1/2
130
141
178
280
109
1 X G 1/2
G 1/2
120
80
231 347
251a
251d
77
28
7
7a 17
301a 219
92 301a
11
92
9
51
11b
105
215a
100
215
49
18
66a
45
67
530a
530
215a 217
6
531a
531
534
534a
3 2 1
TM058200
Printed from Grundfos Product Centre [2018.06.003] 10/13
Exploded view ( TM057026 for MGE model H/I )
251d
251b
291
290
287
277a
287a 273b
293 502
277
252a 286
273a
273
266
275a
268
268a
289a
289
251a 288b
288
288a
252b
159e
150
152
151
157 156
156c
158
185
154
178
172
187
153 191
188
156d
156b
192
156c
159d