The document provides technical details for a 1100 liter plastic lid container, including that the body is made of 1.5mm steel sheet formed into a single piece with reinforced bottom corners, it has lifting arms and a lid made of high-density polyethylene that are welded to the steel body, and it features 4 swivel carrying rollers with 2 having brakes that meet industry standards.
The document provides technical details for a 1100 liter plastic lid container, including that the body is made of 1.5mm steel sheet formed into a single piece with reinforced bottom corners, it has lifting arms and a lid made of high-density polyethylene that are welded to the steel body, and it features 4 swivel carrying rollers with 2 having brakes that meet industry standards.
The document provides technical details for a 1100 liter plastic lid container, including that the body is made of 1.5mm steel sheet formed into a single piece with reinforced bottom corners, it has lifting arms and a lid made of high-density polyethylene that are welded to the steel body, and it features 4 swivel carrying rollers with 2 having brakes that meet industry standards.
A. The body is made of 1.50 mm bended in one piece of steel sheet
made form with pressed and strength has been increased.Bottom corners are radius. Installation of manufactured from the same sheet with the body steel, pressing the edges of the side steel formed of at least 20 mm. width can twisted ledge or lip including all surroundings and radius, with this protrusion the side iron sheets and body sheets are uninterrupted merged from outboard with radius . B. The body welds and other welds boiled without slag with gas tecnology. C. The body mouth is turned complete pipe profile. D. The lifting arms and lid connection 2.50 mm. the steel is welded on the apparatus and screwed to the body. E. The lifting trunnions are made suitable for EN standart.The lid handles are 3.mm. F. Flat lid made of High-Density Polyethylene (HDPE), pure quality- colour grey/ colour green G. There are 4 carrying rollers with the size of 200 x50 and wide fork, swivel 360, two of them are with brakes, fork sheet is 4.00 mm.Wheels are settled which are suitable to the standards of TS EN 12532. Thickness of the Wheel mounting bracket is 4.00 mm. H. Containers all inside and outside included lid galvanized in accordabce with the standard of TS EN ISO 1461 with the system of hot dipping galvanizing
A Practical Workshop Companion for Tin, Sheet Iron, and Copper Plate Workers: Containing Rules for Describing Various Kinds of Patterns used by Tin, Sheet Iron, and Copper Plate Workers, Practical Geometry, Mensuration of Surfaces and Solids, Tables of the Weights of Metals, Lead Pipe, Tables of Areas and Circumferences