You are on page 1of 1

GLENCORE AGRICULTURE BV

STANDARD STOWAGEPLAN Vessel: MV ANDROMEDA


Portname: Function (L/D) Max Draft (HW) Max Draft (LW) Max WLTHC Arr Draft Fore Arr Draft Aft Density Dep Draft Fore Dep Draft Aft Density Comments
SANTOS/TIPLAM L 13.32 4.58 7.40 1.025 12.0 12.0 1.017

Hold #7 Hold #6 Hold #5 Hold #4 Hold #3 Hold #2 Hold #1


Airdraft (ballast)
Airdraft (laden)

Cargo / SF SOYA BEAN / 48cft.mt SOYA BEAN / 48cft.mt SOYA BEAN / 48cft.mt SOYA BEAN / 48cft.mt SOYA BEAN / 48cft.mt
Tonnage 11728.9 mt 7320 mt 11295.5 mt 11970 mt 10269.1 mt
Full / Slack (%) Full SLACK (62.81%) Full SLACK (92.14%) Full
Destination
CFT / CBM 562993.9 / 15942.1 351360.0 / 9949.3 542190.8 / 15353.0 574560.0 / 16269.6 492919.8 / 13957.8
MENTIONED CARGO QUANTITY IS THE MAXIMUM THEORETICAL LIFTED QUANTITY AS PER CHARTERERS' REQUEST.

ALSO, ESTIMATED LOADABLE QUANTITY/TENTATIVE PRE-STOWAGE PLAN IS SUBJECT TO CARGO ACTUAL STOWAGE FACTOR, VESSEL STABILITY, TRIM, STRESSES,
HOGGING OR SAGGING, CARGO EFLECTION, DRAFT RESTRICTIONS AT LPORT AND DISPORT IF ANY, SALINITY OF WATER(ACTUALLY), BUNKERING, AMENDMENTS &
ALTERATIONS. E & EO.
Draft Calculation reference: 12.0 Mtr 1.017 Density Deadweight 54,726.000
Tank No. Fill % MT Deductibles
FPT 0 Ballst 0.00
BWT 1P 0 Fresh Water 372.00
BWT 1S 0 Bunkers (IFO) 1362.00
BWT 2P 0 Grain Heeling Momoment 44392 Bunkers (MDO / MGO) 120.50
BWT 2S 0 Max Allowable Heeling Mom 50356 Lub Oil 46.00
BWT 3P 0 Heel angle 10.8 Constant 242.00
BWT 3S 0 Lightship 11737.19 Hog/Sag
BWT 4P 0 GoM 3.29
BWT 4S 0 Max Cargo (Acc. DWT) 52583.50
BWT 5P 0 Seasonal Mark SUMMER
BWT 5S 0 Corresponding DWT @ this Draft. 54726 Cargo Master Stowplan 52583.50
APT 0 Corresponding TPC @ this Draft. 61.52
Bending Mom (%) 23
Displacement (1,025) @ Arrival 1st diport draft) 71443 Shear Force (%) 38
Total Ballast 0

Abbreviations: PI=Pump In GI=Gravitate In F=Full PO=Pump Out GO=Gravitate Out MT=Empty


All entries within the box must be completed as far as possible. The outside the box are optional *Bending moments(BM) & Shear forces(SF) are to be expressed as a %age of maximum
Signed Ship permited in port values for intermediate stages, and of max permited at sea
Version No: 02-2015 Version Date: 9/1/2015 values for the final stage.

You might also like