Professional Documents
Culture Documents
®
50% More Bellows...
12
Industry Standard? 50 % Extra
G
a DMSF™.
J
Inboard Bellows
The bellows unit is ideally situated to replace the
semi-dynamic sliding elastomer of a conventional
pusher seal. This allows the bellows design to be
more readily applied to thermal applications.
I
Directed Barrier Fluid Circulation
Removing the heat at the inboard faces is critical for any double mechanical seal, more so for
a seal which may be applied to thermal applications.
The BDFI™ / BDFC™ directed barrier fluid flow path achieves effective heat removal at both D
sets of seal faces.
Barrier Fluid Out
F
Barrier Fluid In
26
Alternatively, in applications which use an external barrier fluid circulation device, such as a
Pumppac™, or where fluid convection is required, the BDFC™ may be offered.
Monolithic seal faces have excellent sealing properties in thermal applications. These faces are
modular to the DMSF™ / SMSS™.
Furthermore, as the outboard elastomers sited in the barrier fluid are not generally subject to
chemical attack, nor does the seal have a barrier temperature necessitating a metal bellows,
external metal bellows designs are not applicable for the majority of applications.
Standard ISO / ANSI Box Bore 28.0mm - 65mm (1.125” - 2.625”)
A B Min B Max C D E F G H I J K L
28.0 44.0 52.0 19.1 100.8 52.4 48.4 62.2 111.1 14.0 57.2 20.6 28.6
35.0 51.0 60.3 19.1 100.8 52.4 48.4 71.8 104.1 11.0 67.0 20.6 28.6
45.0 63.5 73.0 19.1 106.7 53.1 53.6 83.8 139.1 14.0 75.7 31.5 33.0
ØH 55.0 74.0 90.5 22.2 108.7 53.1 55.6 100.3 150.0 17.5 86.6 25.3 29.0
60.0 79.4 95.0 19.1 108.7 53.1 55.6 108.7 170.8 17.5 94.4 26.5 29.7
63.0 85.8 95.0 19.1 114.9 53.1 61.8 108.7 170.8 17.5 94.4 31.5 33.0
65.0 88.9 98.0 19.1 114.9 53.1 61.8 111.9 180.3 17.5 98.3 31.5 33.0
G
J
1.125 1.750 2.062 0.750 3.970 2.062 1.908 2.449 4.375 0.551 2.250 0.812 1.125
1.375 2.000 2.375 0.750 3.970 2.062 1.908 2.827 4.100 0.433 2.638 0.812 1.125
1.750 2.500 2.875 0.750 4.200 2.091 2.109 3.297 5.475 0.551 2.982 1.240 1.299
1.875 2.625 3.000 0.750 4.200 2.091 2.109 3.450 5.906 0.689 3.108 1.240 1.299
1.875-D 2.625 2.875 0.800 4.200 2.091 2.109 3.325 4.875 0.472 3.025 1.150 1.150
2.125 2.875 3.562 0.875 4.280 2.091 2.189 3.950 5.906 0.689 3.408 0.995 1.140
2.375 3.125 3.750 0.750 4.280 2.091 2.189 4.280 6.725 0.689 3.716 1.043 1.170
M
H
2.500 3.375 3.750 0.750 4.525 2.091 2.434 4.280 6.725 0.689 3.716 1.240 1.299
2.625 3.500 3.875 0.750 4.525 2.091 2.434 4.405 7.100 0.689 3.871 1.240 1.299
90.0 114.3 136.5 23.8 115.9 63.5 69.9 152.0 214.6 21.0 135.5 36.0 40.1
95.0 117.5 139.7 23.8 115.9 63.5 69.9 155.2 227.3 21.0 138.7 36.0 40.1
100.0 123.9 152.4 23.8 115.9 63.5 69.9 167.9 240.0 21.0 151.4 36.0 40.1
2.750 3.625 4.625 0.937 4.937 2.500 2.437 5.173 7.450 0.689 4.585 1.418 1.578
2.875 3.750 4.625 0.937 5.000 2.500 2.500 5.173 7.450 0.689 4.585 1.418 1.578
3.000 3.875 4.625 0.937 5.000 2.500 2.500 5.173 7.450 0.689 4.585 1.418 1.578
3.125 4.000 5.000 0.937 5.000 2.500 2.500 5.610 7.950 0.827 4.960 1.418 1.578
D 3.250 4.125 5.000 0.937 5.000 2.500 2.500 5.610 7.950 0.827 4.960 1.418 1.578
3.375 4.250 5.000 0.937 5.000 2.500 2.500 5.610 7.950 0.827 4.960 1.418 1.578
E 3.500 4.375 5.375 0.937 5.000 2.500 2.500 5.985 8.450 0.827 5.335 1.418 1.578
3.625 4.500 5.375 0.937 5.000 2.500 2.500 5.985 8.450 0.827 5.335 1.418 1.578
L 3.750 4.625 5.500 0.937 5.000 2.500 2.500 6.110 8.950 0.827 5.460 1.418 1.578
“OUTLET” 3/8” NPT 3.875 4.750 5.500 0.937 5.000 2.500 2.500 6.110 8.950 0.827 5.460 1.418 1.578
4.000 4.875 6.000 0.937 5.000 2.500 2.500 6.610 9.450 0.827 5.960 1.418 1.578
Important - some glands are manufactured from Contact AESSEAL® Technical Department for dimensional information
castings and therefore the angle and position of of seal sizes not shown.
the port should be checked. If in doubt, please
contact the AESSEAL® Technical Department. Check availability as only a limited size range is inventoried.
BDFI™ / CDFI™ - modularity at its best
The CDFI™ and CDFC™ are sister products to the BDFI™ /BDFC™.
See the CDFI™ / CDFC™ literature for further information. You can
download this and other information from www.aesseal.com or
request it from marketing@aesseal.com.
CDFI™ - Cartridge Double Flow Inducer