Professional Documents
Culture Documents
SM 20
SM 20
cardiagn.com
135722
137082
a
a Move aside the Protection and Switching Unit wiring
(5) at the rubber rings. Note:
a Partially remove the Protection and Switching Unit to Connect the connectors with the shor test wiring
disconnect its connectors. first to avoid stressing the wiring and dislodging a
connector.
Note:
137083 If the Protection and Switching Unit does not clip
a Disconnect the Protection and Switching Unit con- on correctly, check the condition of the wiring of
nectors, marking their position. the Protection and Switching Unit connectors.
a Remove the Protection and Switching Unit.
a
Note:
Check that the wiring sealing rings are in the
notches on the UPC unit and are correctly and
fully located in their housing.
87G-2
ENGINE COMPARTMENT CONNECTION UNIT
Protection and Switching Unit: Removal - Refitting 87G
a Clip on the UPC passenger compartment wiring
support bracket.
a Clip the Protection and Switching Unit cover onto the
unit.
a Check that the clips are correctly clipped in place.
Note:
When the cover is correctly clipped in place, the
locks slide freely.
Note:
If a clip or a clip notch is broken, the faulty cover
or unit must be changed.
cardiagn.com
137067
a Lock the UPC cover safety catches by aligning the
lock mark with the mark on the cover of the unit.
II - FINAL OPERATION
a Connect the battery (see 80A, Battery, Battery: Re-
moval - Refitting, page 80A-2) .
a In the event of a replacement, apply the after repair
procedure using the Diagnostic tool :
- connect the Diagnostic tool,
- select "Protection and Switching Unit",
- go to repair mode,
- display the "Before/after repair procedure" for the
computer selected,
- carry out the operations described in the "After re-
pair procedure" section.
87G-3
WIRING HARNESS
Computers: List and location of components 88A
cardiagn.com
144352
- a front lighting computer (see 80B, Headlights, Front - a diesel injection computer (see Diesel injection
lighting computer: Removal - Refitting, page 80B- computer: Removal - Refitting) (13B, Diesel injec-
33) (7) tion) (9)
88A-1