Professional Documents
Culture Documents
Psbu I
Psbu I
PSBU
PSBU Installation Instructions
DISCLAIMER
Milestone AV Technologies, and its affiliated corporations and WARNING: Exceeding the weight capacity can result in
subsidiaries (collectively, “Milestone”), intend to make this serious personal injury or damage to equipment! It is the
manual accurate and complete. However, Milestone makes no installer’s responsibility to make sure the combined weight of
claim that the information contained herein covers all details, all components attached to the PSBU does not exceed 200 lbs
conditions or variations, nor does it provide for every possible (90.7 kg).
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone WARNING: Use this accessory only for its intended use as
makes no representation of warranty, expressed or implied, described in these instructions. Do not use attachments not
regarding the information contained herein. Milestone assumes recommended by the manufacturer.
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
WARNING: Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
®Chief is a registered trademark of Milestone AV Technologies. repair.
All rights reserved.
2
Installation Instructions PSBU
DIMENSIONS
[862] 39.93" MAX
[200] 7.87" MIN
MOUNTING PATTERN
25.2
.99
DEPTH ADDED TO MOUNT
177.8
7.00
C/L OF MOUNTING PATTERN
517.5 546.1
20.37 21.50
422.3
16.63
66.7
2.63
37.1
1.46
939.8
37.00
LEGEND
Tighten Fastener Phillips Screwdriver
Apretar elemento de fijación Destornillador Phillips
Befestigungsteil festziehen Kreuzschlitzschraubendreher
Apertar fixador Chave de fendas Phillips
Serrare il fissaggio Cacciavite a stella
Bevestiging vastdraaien Kruiskopschroevendraaier
Serrez les fixations Tournevis à pointe cruciforme
3
PSBU Installation Instructions
1/8”
(included)
PARTS
Hardware Kit
Bag A Bag B Bag C
MA (8) MB (4)
[Nesting spacer] [Universal spacer]
N (8)
P (1)
#10-24 x 1/2"
1/8”
Q (2)
[Horizontal bracket]
4
Installation Instructions PSBU
Mounting holes
0.563 0.750
0.375 [14.3] [19.1]
[9.5]
1 Figure 2
4
7. If the display has a recessed mounting surface, protrusions
or a power box, a spacer and longer mounting hardware
must be placed between the display and vertical mounting
bracket (R). (See Figure 3)
8. Repeat Steps 3 through 6 for Right side vertical mounting
Mounting Slots bracket using the same hole locations to align brackets
horizontally.
Figure 1
(MA) x 4
(MB) x 4
(R)
(A through L)
x4
(R) x 2
Figure 3
5
PSBU Installation Instructions
(R) x 2
(R) x 2
13
12
13 (N) x 8
(Q) x 2
Figure 5
6
Installation Instructions PSBU
7
PSBU Installation Instructions