Product Data Sheet
Edition 2, 2015
Version no. 12.2014
Antisol® - E
Concrete Curing Compounds
Product Liquid curing compound for preventing water loss in concrete. Ready for use and
Description simple to apply
Antisol® -€ complies with ASTM C 309-81 type 1 Class A,
Uses “Antisol® -E is sprayed onto navy laid conerete surfaces to form a thin fim barrier
against premature water loss. Without disturbance to the normal setting action, the
concrete is then allowed to cure and achieve maximum properties,
Antisol® -€ is particularly usefu| in large areas of exposad concrete, such as:
m Highways,
wm Runways and taxivays.
Aprons and hard standings.
Roof decks.
Retaining walls,
Pre-stressed beams and piers.
Irrigation canalsichannals,
Advantages Reduces incidence of plastic cracking,
Ensure achievement of desired strengths.
Minimises shrinkage.
Reduces dusting
m Increases frost resistance,
i Alleviates other costly method such as hessian-watering
Approval Standard Artisol” -E has been tested as per SCAGMD Rulle 1168
Result: VOC content is 09/1
Technical Data
Form Emulsified Polyolefins
Colour Waitish
Density (0.88 = 0.02 kgil
Packaging 6 Kg and 20 Kg pails
200 kg drums:
Storage ‘Store in Gry conditions protected from direct sunlight and frost.
Shelf Lite 12 ponte from date f production if stored propery in the orginal unopened
packaging.
Antisol®-E 2Application Details
Consumption
‘The rate of coverage depends on vind, humidity and temperature
As a general guide: 0.15 0.20 kgim’
Surface conditions
The surface water of the newly jaid concrete must have eveporeted (between 74 to
2 hours depending on temperature etc.)
Method of application
Stir the Antisol® -E well before use!
Antisel® -E curing membranes has been dasigned for spray application to the newly
laid concrete. A thin film of Antisol” -E is applied to the whole surface using hand or
‘motor operated spray gun. For large areas and concrete ‘trains’ application can be
carried out by power drivan automate equipment.
Cleaning
Clean all tools and equipment with petrol immediately after use.
Important
‘Remaining Antisol®-E fms have to be removed prior to application of any screed or
coating
After application the treated area must be protected from rain for atleast 2-3 hours,
Safety Instructions
Safety Precautions
To avoid rare allergic reactions, we recommend the use of protective gloves.
Change soiled work clothes and wash hands before breaks and after finishing work.
Ecology
Residues of material must be removed according to local regulations,
Fully cured material can be disposed of as household waste under agreement with
the responsible local authorities.
Toxicity
Non-Toxie under relevant health and safety codes.
Transport
Non-hazardous
Legal notes
“The ntormaton, and in partly, the reemmencatons vestng to te appliston she end-use ct
‘Sica products, ate given in good faith based an Sha'scuren knoedge and experience ofthe pods
when propery stored, anded ard appbed under nomal conditions in accordance with
‘Sic’ ecommendators In pracice, he eferences in materials, subsbates and actual ste constons are
uth hat no warany in respect of merchartabiy or of fins fra parcular purpose, nor any Ely
Basing out of any legal elionstip whatsoever, can be inferred ether fom this ifrmaton, or fern any
nian recommendtons, or rom ary other advice eflered. The user ofthe product must est te product's
[Sonbity forthe intended eppcaion and purpose Sik reson the rot fo change the properties of ts
roduts. The peopretry nights of Tia pares must be Observed. Al Ores ae accepted SNES 1 OU
Custent tems Of sale and delivery. Users mest always refer tothe most ecert sue of te loa! Product
ata Sheet forthe product concerned, copies of whch wl be suppied on request
‘Ska Egypt for Construction Chemicals
‘aut ety Tel 202-4461 0500
Snsustal te (4) Fax 202. 4640450
Section #10 Block 12085, Mob £2042: 2500 382085,
Ent www siacomeg
Antisol®-E 2/2